CEE Faculty Profile

Overview Honors and Awards Publications and Patents Presentations/Reports Printable CV

Jochen Teizer

Associate Professor

Presentations

  1. “Tracking Devices and Area Scanning for Safe Processes in Downstream Operations”, Global Fire Chiefs Conference, Chevron Energy Technology Company, Texas A&M University, College Station, Texas, May 9-10, 2012.
  2. “Technology to Enable Real-time Pro-Active Safety and Health in Construction”, National Occupational Injury Research Symposium 2011, U.S. Department of Health and Human Services, Center of Disease Control and Prevention, National Institute for Occupational Safety and Health, Morgantown, West Virginia, October 18, 2011.
  3. “Health and Safety in Construction” 29th International Symposium on Automation and Robotics in Construction (ISARC), Eindhoven, The Netherlands, June 26-29, 2011.
  4. “Energy Harvesting Device for Detecting Personnel Nearby Heavy Construction Equipment”, Building Construction and Material Group, Kajima Technical Research Institute, Kajima Corporation, Japan, July 19, 2011.
  5. “Leveraging Spatial and Location Tracking Technology for Construction Safety”, Osaka University, Osaka, Japan, July 14, 2011 (INVITED).
  6. Zhang, S., Lee, J.K., Venugopal, M., Pradhananga, N., Costin, A., Teizer, J., Eastman, C., (2011), “Automated Rule-Based Safety Checker for Building Information Models (BIM)”, 28th Annual Conference of the Construction Industry Institute (CII), Chicago, Illinois, July 26-27, 2011.
  7. “Real-time Location Tracking and Data Visualization for Emergency Response”, Miyagi University, Sendai, Japan, July 5, 2011 (INVITED).
  8. “Integrating BIM and Safety: A Rule-Based Checking System for Safety Planning and Simulation”, Digital Building Symposium, Atlanta, Georgia, May 26, 2011.
  9. “Real-time 3D Immersive Visualization of Spatio-Temporal Construction Resource Data”, Presentation to Students and Faculty of Civil and Environmental Engineering at Stanford University, Stanford, California, March 31, 2011 (INVITED).
  10. Kale, S., Lumish, J., Serrano, M., Teizer, J. and Vela, P.A. (2011). “Using the Kinect for Automating Manipulation Tasks”, 35th SIAM Southeastern Atlantic Section Conference, Charlotte, NC, March 26-27, 2011.
  11. “Protecting Construction Workers from Hazards in Real-time and Pro-Actively utilizing Advanced Sensing Technology”, Presentation to Students and Faculty of Civil Engineering at the University of Washington, Seattle, Washington State, February 18, 2011 (INVITED).
  12. Cheng, T., Thomas, S., Venugopal, M., Wheeler, E., Teizer, J., and Reynolds, M.S., (2011). “SmartHat: Self-Monitoring, Analysis, and Reporting Technology for Hazard Avoidance and Training,” 2011 NSF Engineering Research and Innovation Conference, Atlanta, Georgia, January 24-26, 2011.
  13. “Real-time Pro-Active Connected Work Site and Information Modeling”, Presentation to Students and Faculty of Civil Engineering at the Karlsruhe Institute of Technology, Germany, December 22, 2010 (INVITED).
  14. “Real-time Information Processing in Construction Site Applications”, Columbia University, New York, November 11, 2010 (INVITED).
  15. “Real-time Pro-Active Resource Location Tracking and Heavy Equipment Safety”. Trimble Dimensions 2010, Las Vegas, Nevada, November 5-7, 2010 (INVITED).
  16. “Digital Building Labs at Georgia Institute of Technology”, BIMForum 2010, Atlanta, Georgia, October 14, 2010 (INVITED).
  17. “Leveraging Passive RFID in Construction”, 2nd Annual Vela Systems Customer Advisory Group Meeting, Boston, Massachusetts, September 28-30, 2010 (INVITED).
  18. “Technology in Construction Safety”, Construction Industry Institute (CII), Moderator and Member of Research Team 269 Panel, Orlando, Florida, August 5, 2010.
  19. “Real-time Pro-Active Safety in Construction,” Israel Institute of Technology (Technion), Haifa, Israel, July 4, 2010 (INVITED).
  20. “Passive RFID in Construction Applications,” ThingMagic, Inc., Boston, Massachusetts, March 8, 2010 (INVITED).
  21. “Real-Time Tracking of Construction Resources on Infrastructure Job Sites”, Transportation Research Board 89th Annual Meeting, Washington D.C., January 10, 2010 (INVITED).
  22. Makhmalbaf, A., Allread, B.S., Venugopal, M., Teizer, J., Brilakis, I., Lourakis, M., Sacks, R., Christodoulou, S., and Savarese, S. (2009). “Automated Generation of Parametric BIMs based on Hybrid Image and Laser Scanning Data”, 26th Annual Conference of the Construction Industry Institute (CII), Reno, Nevada, August 5-6, 2009.
  23. Teizer, J., Reynolds, M.S., Venugopal, M., Cheng, T., Thomas, S., Allread, B., Fullerton, C., and Sadeghpour, F. (2009). “SmartHat: Self-Monitoring, Analysis, and Reporting Technology for Hazard Avoidance and Training,” 2009 NSF Engineering Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.
  24. “Leveraging Technology for a Connected and Safe Worksite”. Presentation to Students and Faculty in the Department of Civil Engineering at Texas A&M University, March 2, 2009 (INVITED).
  25. “Nanotechnology and Its Impact on Construction”, Nano@Tech Seminar, Microelectronics Research Center at Georgia Institute of Technology, January 27, 2009 (INVITED).
  26. Bohn, J.S. and Teizer, J. (2009). “Construction Project Monitoring using Hi-Resolution Automated Cameras,” 88th Annual Meeting of the Transportation Research Board, Washington D.C., January 12, 2009.
  27. “Tracking and Monitoring Construction Assets in Real Time and Proactively.” Workshop 148 – Using Information Technologies to Support Better Construction Management, 88th Annual Meeting of the Transportation Research Board, Washington DC, January 11, 2009 (INVITED).
  28. “Real-time Data Collection and Processing for Intelligent Decision Making”. Class presentation to Construction Engineering and Management in the Department of Civil Engineering at Texas A&M University, November 6, 2008 (INVITED).
  29. “Leveraging Technology for Real-time Pro-Active Work Zone Safety”. Presentation to the Department of Construction Management at the School of Civil Engineering at Tsinghua University, Beijing, China, October 15, 2008 (INVITED).
  30. “Nanotechnology and Its Impact on Construction”. 25th Anniversary Conference of the Construction Industry Institute, Keystone, Colorado, August 7, 2008.
  31. Fullerton, C., Allread, B., and Teizer, J. (2008), “Pro-Active Proximity Sensing and Warning Technology,” 25th Anniversary Conference of the Construction Industry Institute (CII), Keystone, Colorado, August 5-7, 2008 (BEST POSTER AWARD).
  32. Venugopal, M., Bohn, J., and Teizer, J. (2008), “Work Pattern and Resource Flow Analysis in Building Information Modeling,” 25th Anniversary Conference of the Construction Industry Institute (CII), Keystone, Colorado, August 5-7, 2008.
  33. Fullerton, C., Winkler, M., and Teizer, J. (2008), “Pro-Active Work Zone Safety in Construction,” Undergraduate Research Spring Symposium and Awards, Presidential Undergraduate Research Award (PURA) Program, Atlanta, Georgia, April 3, 2008.
  34. Allread, B., Fullerton, C., and Teizer, J. (2008), “Real-time Pro-Active Proximity Sensing and Alert Technology,” 88th Annual Meeting of the Transportation Research Board, Washington D.C., January 11, 2009.
  35. “Transportation Fleet Safety”, Improving the Effectiveness of Fleet Safety Programs Transportation Symposium, American Society of Safety Engineers, United Parcel Services (UPS), Corporate Headquarter Offices, Atlanta, Georgia, September 13, 2007 (INVITED).
  36. Vogt, B. and Teizer, J. (2007), “Radio Frequency Tracking and Laser Scanning to Increase the Productivity and Safety of Off-shore Pipe Fitting,” Construction Industry Institute (CII), Annual Conference, Orlando, Florida, July 31-August 2, 2007.
  37. “Emerging Range Imaging & Wireless Sensing Technologies for Increased Productivity, Safety & Security in Construction & Transportation,” SPAR, 4th Annual conference, Capturing and Documenting Existing-Conditions Data for Design, Construction and Operations, Sugar Land, Houston, Texas, March 27, 2007 (INVITED).
  38. “Real-time Spatial Monitoring of Construction Resources and Processes,” Presentation to Construction Engineering and Management in the Department of Civil Engineering, University of Michigan, Ann Arbor, Michigan, March 8, 2007 (INVITED).
  39. Sofer, M. and Teizer, J. (2007), “Flash LADAR and RFID System to Increase Safety in Construction,” Undergraduate Research Spring Symposium and Awards, Presidential Undergraduate Research Award (PURA) Program, Atlanta, Georgia, March 4, 2007.
  40. “Flash LIDAR for Road Design,” 85th Annual Meeting of the Transportation Research Board, Washington D.C., January 24, 2006 (INVITED).
  41. “Flash LADAR (Laser Detection and Ranging) Technology and Applications in Transportation,” 85th Annual Meeting of the Transportation Research Board, Washington DC, January 22, 2006 (INVITED).
  42. “Real-time 3D Laser Scanning with a Flash LADAR,” Transportation Research Board, Summer Meeting of AFB80 Committee, Orlando, Florida, July 23, 2005.
  43. Teizer, J., (2005). “Real-Time 3D Modeling of Infrastructure Using Emerging Technology,” Graduate Research and Industry Networking, The University of Texas at Austin, Austin, Texas, April 28, 2005.
  44. Teizer, J., (2005). “Experiments in Real-time Spatial Data Acquisition for Obstacle Detection,” Construction Research Congress, San Diego, California, April 7, 2005.
  45. Teizer, J., (2005). “A Framework for Real-time 3D Modeling of Infrastructure,” 84th Annual Meeting of the Transportation Research Board, Washington D.C., January 12, 2005.

Reports

  1. Teizer, J. and Hinze, J. (2011). “Real-time Pro-Active Safety in Construction”, Implementation Source 269-2, to the Construction Industry Institute, The University of Texas at Austin, April 2011.
  2. Teizer, J. and Hinze, J. (2010). “Real-time Pro-Active Safety in Construction”, Research Report 269-11, to the Construction Industry Institute, The University of Texas at Austin, October 2010.
  3. Teizer, J. and Hinze, J. (2010). “Real-time Pro-Active Safety in Construction”, Research Summary 269-1, to the Construction Industry Institute, The University of Texas at Austin, August 2010.
  4. Cheng, T. and Teizer, J. (2010). “Report on Blind Spot Measurements”, Research Report to JCB Inc., April 16, 2010.
  5. Bohn, J. and Teizer, J. (2008). “Benefits and Barriers of Hi-Resolution Automated Cameras in Construction.” Research Report to OxBlue, Inc.
  6. Teizer, J., Teizer, W., Venugopal, M., Sandha, B. (2008). “Nanotechnology and Its Impact on Construction.” Research Report 251-1 to the Construction Industry Institute, College of Engineering, The University of Texas at Austin, August 2008.
  7. Teizer, J. (2008). “Project A-2: Evaluation of Pedestrian Traffic in Intersections.” No. DTFH61-07-RA-00125, Federal Highway Administration, Department of Transportation, United States of America, as part of the Final Report to the Transportation Research Center (TRC) for Freight, Trade, Security, and Economic Strength.
  8. Teizer, J., Caldas, C.H., Haas, C.T., and Bosche F. (2005), “Services to develop efficient algorithms for processing Flash LADAR data obtained from a moving platform to detect stationary & moving objects within field of view,” Final Report to the National Institute of Technology and Standardization, College of Engineering, University of Texas, October 2005.
  9. Tiantian, S., Teizer, J., Changwan, K., Goodrum, P., and Haas, C.T. (2005), “Content Analyses: CII Members’ Annual Reports and Mission & Vision Statements,” Report to the Construction Industry Institute, College of Engineering, University of Texas, July 2005.
  10. Teizer, J., Haas, C.T., Caldas, C.H.., Liapi, K.A. (2004), “Collaborative LADAR Object Recognition and Tracking Research,” Final Report to the National Institute of Technology and Standardization, College of Engineering, University of Texas, February 2004.