CEE Faculty Profile

Overview Honors and Awards Publications and Patents Presentations/Reports Printable CV

Ward O. Winer, Ph.D., P.E.

School Chair Emeritus

Articles

  1. "Dynamic Response of Fluid and Wall Temperatures during Pressurized Discharge of a Liquid from a Container," Advances in Cryogenic Engineering 6 (1961) 310-322 (with V. S. Arpaci and J. A. Clark).
  2. "Generalization of a Class of Solutions of the Laminar Incompressible, Boundary-Layer Equations," TRANS. ASME 83D (196l) 328-332 (with A. G. Hansen).
  3. "Boundary-layer Energy Equation," Journal of Aerospace Science 29, No. 6 (1962) 750-751.
  4. "Lubrication of Metals with Silicones at High Pressures and Low Sliding Speeds," Gear Lubrication, Institute of Petroleum, London, England (1966) 11:35-37 (with D. Tabor).
  5. "Silicone Fluids - Their Action as Boundary Lubricants," TRANS. ASLE 8 (1965) 69-77 (with D. Tabor).
  6. "Molybdenum Disulfide as a Lubricant: A Review of the Fundamental Knowledge," Wear 10, No. 6 (1967) 422-452.
  7. "Some Measurements of High Pressure Lubricant Rheology," TRANS. ASME, Journal of Lubrication Technology 90, No. 3 (July 1968) 580-591 (with J. D. Novak).
  8. "A Correlation of Bulk Modulus and PVT Data for Silicone Fluids at Pressures up to 500,000 psi," TRANS. ASLE 11 (October 1968) 338-344 (with J. A. Tichy).
  9. "The Effect of Pressure on the Non-Newtonian Behavior of Polymer Blended Petroleum Oils," TRANS. ASME, Journal of Lubrication Technology 91, No. 3 (1969) 459-463 (with J. D. Novak).
  10. (Editor) "Proceedings of ASME-ASTM-ASLE Symposium on Lubrication and Lubricant Rheology," TRANS. ASME, Journal of Lubrication Technology 90, No. 3 (July 1968) 525-613.
  11. "Inertial Considerations in Parallel Circular Squeeze-Film Bearings," TRANS. ASME, Journal of Lubrication Technology 92 (1970) 588-592 (with J. A. Tichy).
  12. "Fluid Rheological Effects in Sliding Elastohydrodynamic Point Contacts with Transient Loading: 1 - Film Thickness," TRANS. ASME, Journal of Lubrication Technology 93 (1971) 262-271 (with D. M. Sanborn).
  13. "Fluid Rheological Effects in Sliding Elastohydrodynamic Point Contacts: II - Traction," TRANS. ASME, Journal of Lubrication Technology 93 (1971) 342-348 (with D. M. Sanborn).
  14. "A Note on the Analysis of Thermal Effects in a Full Journal Bearings," TRANS. ASME, Journal of Lubrication Technology 93, No. 4 (1971) 514-515.
  15. "A Viscometer for High-Pressure Use and Some Results," TRANS. ASME, Journal of Basic Engineering 94, No. 3D (September 1972) 586-589.
  16. "Some Observations of the Relationship between Film Thickness and Load in High Hertz Pressure Elastohydrodynamic Contacts," TRANS. ASME, Journal of Lubrication Technology 95 (1973) 386-390 (with D. M. Sanborn and D. Lee).
  17. "Simulation of Severe Shear Conditions in Lubrication," Viscometry and Its Application to Automotive Lubricants, Society of Automotive Engineers SP-382 (1973) 59-67 (with J. Jakobsen and D. M. Sanborn).
  18. "Pressure Viscosity Characteristics of a Series of Siloxanes," TRANS. ASME, Journal of Lubrication Technology 96 (1974) 410-417 (with J. Jakobsen and D. M. Sanborn).
  19. "Temperature Measurements in Sliding Elastohydrodynamic Point Contacts," TRANS. ASME, Journal of Lubrication Technology 96 (1974) 464-471 (with V. Turchina and D. M. Sanborn).
  20. "Traction of Elastohydrodynamic Contacts with Thermal Shearing Flow," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (1975) 424-429 (with J. Jakobsen).
  21. "Dissipative Heating Effects and EHD Corrections for Viscous Newtonian Flow in High Shear Stress Capillary Viscometry," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (1975) 424-478 (with J. Jakobsen).
  22. "High Shear Stress Behavior of some Representative Lubricants," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (1975) 479-485 (with J. Jakobsen).
  23. "Pressure-Viscosity Measurements for several Lubricants to 5.5 x 108 N/m2 (8 x 104 psi) and 149C (300F)," TRANS. ASLE 18, No.4 (1975) 249-262 (with W. R. Jones, R. L. Johnson and D. M. Sanborn).
  24. "The Viscous Lubrication of Rolling and Sliding Rigid Cylinders," TRANS. ASME, Journal of Lubrication Technology 97F, No. 2 (April 1975) 180-186 (with S. F. Carlson).
  25. "SI Units for Readers and Authors in Lubrication Technology," TRANS. ASME, Journal of Lubrication Technology 96 (1974) (two pages on back cover of issues No. 2, 3, 4).
  26. "Polymer Degradation in Elastohydrodynamic Lubrication," Proceedings of International Colloque on Polymers and Lubrication, C.N.R.S., Brest, France (1974) (with D. Walker and D. M. Sanborn).
  27. "Simulation of Severe Shear Conditions in Lubrication," Proceedings of Society of Automotive Engineers (1974) (with J. Jakobsen and D. M. Sanborn).
  28. "Dynamics of Roller Bearings considering Elastohydrodynamic Forces," Proceedings of Japanese Society of Lubrication Engineers/American Society of Lubrication Engineers Joint International Meeting, Tokyo, Japan II (June 1975) 9-16.
  29. "The Mechanical Properties of Fluids in High Pressure Hydraulic Systems," Proceedings of National Fluid Power Conference XXVIII (1974) 412-421.
  30. "Molecular Degradation of Lubricants in Sliding Elastohydrodynamic Contacts," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (July 1975) 390-397 (with D. L. Walker and D. M. Sanborn).
  31. "Prediction of Traction in Sliding EHD Contacts," TRANS. ASME, Journal of Lubrication Technology 98, No. 3 (July 1976) 362-366 (with R. Kunz).
  32. "Infrared Temperature Mapping in Elastohydrodynamics Lubrication," TRANS. ASME, Journal of Lubrication Technology 98 (April 1976) 236-243 (with V. K. Ausherman, H. S. Nagaraj and D. M. Sanborn).
  33. "Effects of Load, Speed and Surface Roughness on Sliding EHD Contact," TRANS. ASME, Journal of Lubrication Technology 99, No. 2 (April 1977) 254-263 (with H. S. Nagaraj and D. M. Sanborn).
  34. "Chemical Effects in Contact Fatigue: Part III - Load-Life Exponent, Life Scatter and Overall Analysis," TRANS. ASME, Journal of Lubrication Technology 98, No. 2 (1976) 308-318 (with W. E. Littmann, B. W. Kelley, W. J. Anderson, R. S. Fein, E. E. Klaus and L. B. Sibley).
  35. "Fluid Film Bearing Housing Design for a Hot Ambient Environment," ASME Paper No. 76-GT-93 (with J. D. McHugh and G. D. Robson).
  36. "Dynamics of Roller Bearings considering Elastohydrodynamic Forces," TRANS. ASLE 19, No. 4 (1976) 267-272 (with M. A. Molina and D. M. Sanborn).
  37. "A New Look at Wear Metal Analysis," SAE Paper No. 770085 (with M. L. Land and C. Schwarz).
  38. "Ferrographic Analysis of Wear Debris generated in a Sliding EHD Contact," TRANS. ASLE 21, No. 3 (July 1978) 181-190 (with W. R. Jones and H. S. Nagaraj).
  39. "Light-Scattering Study of the Glass Transition in Lubricants," TRANS. ASME, Journal of Lubrication Technology 100, No. 2 (July 1978) 418-422 (with M. A. Alsaad, F. D. Medina and D. C. O'Shea).
  40. "Asperity Interactions in EHD Contacts," TRANS. ASME, Journal of Lubrication Technology 100, No. 1 (April 1978) 246-253 (with H. S. Nagaraj and D. M. Sanborn).
  41. "Glass Transitions in Lubricants: Its Relation to EHD Lubrication," TRANS. ASME, Journal of Lubrication Technology 100, No. 2 (July 1978) 404-417 (with M. Alsaad, S. Bair and D. M. Sanborn).
  42. "Glass Transitions in Lubricants: Its Relation to Elastohydrodynamic Lubrication (EHD)," Bulletin of the Japan Petroleum Institute 19, No. 1 (May 1977) (with M. Alsaad, S. Bair and D. M. Sanborn).
  43. "Direct Surface Temperature Measurement by Infrared Radiation in EHD and the Correlation of the Blok Flash Temperature Theory," Wear 49 (1978) 43-59 (with H. S. Nagaraj and D. M. Sanborn).
  44. "An Investigation into the Influence of Fluid Viscoelasticity in a Squeeze Film Bearing," TRANS. ASME, Journal of Lubrication Technology 100, No. 1 (1978) 56-64 (with J. Tichy).
  45. "A Review of Thermal Phenomena in EHD," Leeds/Lyons Conference Proceedings, Mechanical Engineering Publications, Ltd. London, (September 1978), pp. 125-130.
  46. "Rheological Response of Lubricants in EHD Contacts," Leeds/Lyons Conference Proceedings, Mechanical Engineering Publications, Ltd. (September 1978).
  47. "The Effect of Surface Roughness on Surface Temperature Fluctuations in EHD Contacts," Leeds/Lyons Conference Proceedings Mechanical Engineering Publications, Ltd. (September 1978).
  48. "Surface Temperature Measurements in Rolling and Sliding EHD Contacts," TRANS. ASLE 22, No. 3 (July 1979) 277-285 (with D. M. Sanborn).
  49. "Shear Strength Measurements of Lubricants at High Pressure," TRANS. ASME, Journal of Lubrication Technology 101, No. 3 (July 1979) 251-257 (with S. Bair).
  50. "A Rheological Model for Elastohydrodynamic Contacts based on Primary Laboratory Data," TRANS. ASME, Journal of Lubrication Technology 101, No. 3 (July 1979) 258-265 (with S. Bair).
  51. "Simultaneous Temperature Mapping and Traction Measurements in EHD Contacts," Proceedings Leeds/Lyons Conference 1979, IPC Science and Technology Publishing Company (1980).
  52. "Lubricant Limiting Shear Stress Effect on EHD Film Thickness," TRANS. ASME, Journal of Lubrication Technology 102, No. 2 (April 1980) 213-221 (with B. Gecim).
  53. "Some Observations on the Relationship between Lubricant Mechanical and Dielectric Transitions under Pressure," TRANS. ASME, Journal of Lubrication Technology 102, No. 2 (April 1980) 229-235 (with S. Bair).
  54. "Tribological Experience with Hard Coats on Soft, Metallic Substrates," Wear 60 (1980) 413-419 (with S. Bair and S. Ramalingam).
  55. "Reactively Sputtered Titanium Nitride Coatings for Tribological Applications," International Journal of Thin Solid Films 73 (1980) 267-274 (with S. Ramalingam).
  56. "An Experimental Evaluation of the Hamrock and Dowson Minimum Film Thickness Equation for fully Flooded EHD Point Contacts," TRANS. ASME, Journal of Lubrication Technology 103, No. 2 (April 1981) 284-294 (with K. A. Koye).
  57. "A Film Thickness Analysis of Line Contacts under Pure Rolling Conditions with a non-Newtonian Rheological Model," TRANS. ASME, Journal of Lubrication Technology 103, No. 2 (April 1981) 305-316 (with B. Gecim).
  58. "Magnetron Sputtering of non-Ferrous Aerospace Alloys for Wear Protection," International Journal of Thin Solid Films 80 (1981) 297-303 (with S. Ramalingam and Y. Shimazaki).
  59. "Friction/Traction Measurements with continuously Variable Slide-Roll Ratio and Side Slip at various Lambda Ratios," Proceedings of Leeds/Lyon Conference 1980, IPC Science & Technology Press Ltd (1981) 296-301 (with S. Bair).
  60. "Preliminary Evaluation of Ion Implantation as a Surface Treatment to Reduce Wear of Tool Bits," NRL Memorandum Report No. 4614, Sept. 1981, 55 pages, (with S. Ramalingam).
  61. "Tribological Characteristics of Sputtered Thin Films in Rolling Hertzian Contacts," International Journal of Thin Solid Films 84, (1981) 273-279 (with S. Ramalingam and S. Bair).
  62. "Infrared Temperature Measurements of a Reciprocating Seal Test," Proceedings 9th Leeds-Lyon Symposium, IPC Science and Technology Press Ltd. (1982) 321-328 (with M. A. Meinders and D. F. Wilcock).
  63. "Coatings for Wear Reduction in Reciprocating Machinery," Proceedings 9th Leeds-Lyon Symposium, Butterworth's (1982) 212-222 (with S. Ramalingam).
  64. "Some Observations in High Pressure Rheology of Lubricants," ASME TRANS. Journal of Lubrication Technology 104, No. 3 (July 1982) (S. Bair) 357-364.
  65. "Regimes of Traction in Concentrated Contact Lubrication," TRANS ASME, Journal of Lubrication Technology 104, No. 3 (July 1982) (S. Bair) 382-386.
  66. "Steady Temperature in a Rotating Cylinder subject to Surface Heating and Convective Cooling," presented at ASLE/ASME Lubrication Conference, Hartford, Connecticut (October 1983) TRANS. ASME, Journal of Tribology 106, No. 1 (January 1984) (with B. Gecim) 120-127.
  67. "An Application of a Free Volume Model to Lubricant Rheology I - Dependence of Viscosity of Temperature and Pressure," TRANS. ASME, Journal of Tribology 106, No. 2 (April 1984) (with S. Bair and S. Yasutomi) 291-303.
  68. "An Application of a Free Volume Model to Lubricant Rheology II - Variation in Viscosity of Binary Blended Lubricants," TRANS. ASME, Journal of Tribology 106, No. 2 (April 1984) (with S. Bair and S. Yasutomi) 304-312.
  69. "Research Needs in Mechanical Systems," Mechanical Engineering, ASME (March 1984) 29-43 (with K .N. Reid, R. Cohen, R. E. Garrett, M. J. Rabins and H. H. Richardson).
  70. "An Application of a Free Volume Model to Lubricant Rheology 1 - Dependence of Viscosity on Temperature and Pressure," Proceedings of the 1983 Japanese Society of Lubrication Engineers Annual Meeting, Nagasaki, Japan, (in Japanese with S. Yasutomi and S. Bair).
  71. "An Application of a Free Volume Model to Lubricant Rheology 2 - Variation in Viscosity of Binary Blended Lubricants," Proceedings of the 1983 Japanese Society of Lubrication Engineers Annual Meeting, Nagasaki, Japan, (in Japanese with S. Yasutomi and S. Bair).
  72. "An Analysis of Lubricant Viscosity by a Free Volume Model," Proceedings of the 1985 Annual Meeting of the Japanese Society of Lubrication Engineers (in Japanese with S. Yasutomi and S. Bair).
  73. "Effect of a Surface Film on the Surface Temperatures of a Rotating Cylinder," TRANS. ASME, Journal of Tribology, 108, No. 1, pp. 92-97 (1986) (with B. Gecim).
  74. "Transient Temperatures in the Vicinity of an Asperity Contact," TRANS. ASME, Journal of Tribology, 107, No. 3, pp. 333-342, (1985) (with B. Gecim).
  75. "A Semi-Quantitative Method for Thin Film Adhesion Measurement, TRANS. ASME, Journal of Tribology, 107, No. 4, pp. 472-477, 1985, (with B. Ting and S. Ramalingam).
  76. "An Experimental Investigation of the Film-to-Substrate Bond Strength of Sputtered Thin Films using a Semi-Quantitative Test Method," TRANS. ASME, Journal of Tribology, 107, No. 4, pp. 478-482, 1985 (with B. Ting and S. Ramalingam).
  77. "Thermal Resistance of a Tapered Roller Bearing," TRANS. ASLE, Vol. 29, No. 4, Oct. 1986, pp. 539-547 (with B. Gecim and S. Bair).
  78. "The Tribological Behavior of an Automotive Cam and Flat Lifter System," TRANS. ASME, Journal of Tribology, 108, No. 3, 1986, pp. 478-486 (with S. Bair and J. Griffioen).
  79. "Steady State Friction Behavior of Sputtered MoS2 Solid Lubricants," Proceedings, JSLE, International Tribology Conference, Vol. II, p. 425, 1985 (with Y. Shimazaki).
  80. "Frictional Behavior of Sputtered Titanium Nitride," Wear, Vol. 117, No. 2, pp. 161-177, 1987 (with Y. Shimazaki).
  81. "Infrared Surface Temperature Measurements in a Sliding Ceramic-Ceramic Contact," Butterworths Publishing, Proceeding Leeds-Lyon Symposium 1985, Mechanisms, and Surface Distress, Dowson, Taylor, Godet, and Berthe, editors, pp. 238-245 (with J. Griffioen).
  82. "On the Traction and Film Thickness Behavior of Greases in Concentrated Contacts," NLGI Spokesman, August 1986, pp. 162-174 (with F. Rastegar).
  83. "Temperature Measurement of Microscopic Areas within a Simulated Head/Tape," Trans. ASME, Journal of Tribology, 108, No. 1, pp. 29-34 1986 (with B. Bhushan, R. Gulino and S. Bair).
  84. "The State of Tribology Research and Activity in the USA," Invited Plenary Lecture at the JSLE International Tribology Conference, Tokyo, July 1985, Lubrication, Vol 31, No. 1, Journal of Japan Society of Lubrication Engineers (also translated into Chinese and German for publication), 1986.
  85. "Steady State Temperatures in a Rotating Cylinder - Some Variations on Geometry and Thermal Boundary Condition," TRANS. ASME Journal of Tribology, 108, No. 3, 1986, pp. 446-454 (with B. Gecim).
  86. "Research Needs in Thermal Systems," Mechanical Engineering, ASME August 1986, (with A. E. Bergles, C. J. Cremers, W. A. Sirignano and J. W. Westwater).
  87. "Thermal Aspects of Oxidational Wear," Thermomechanical Effects in Sliding Systems, F. E. Kennedy, Jr., ed., Elsevier-Sequoia, Wear 102, 1985, pp. 67-80 (with T.F.J. Quinn).
  88. "An Experimental Study of the 'hot-spots' Occurring During the Oxidational Wear of Tool Steel on Sapphire," TRANS. ASME, Journal of Tribology, 109, No. 2, pp. 315-320, April 1987 (with T.F.J. Quinn).
  89. "Shear Rheological Characterization of Motor Oils," ASLE Transactions, Vol. 31, No. 3, 1988, pp. 317-324 (with S. Bair).
  90. "The Influence of Ambient Pressure on the Apparent Shear Thinning of Liquid Lubricants: An Overlooked Phenomena," Proceedings of the Institution of Mechanical Engineers Conference" Tribology 50 Years On," July 1-3, 1987, pp. 395-398 (with S. Bair).
  91. "Thermal Conductivity of Lubricants at High Pressures," TRANS. ASME, Journal of Tribology, Vol. 109, pp. 566-567, July 1987 (with B. Gecim).
  92. "Tribological Characteristics of Needle Bearings," Proceedings of the 15th Leeds-Lyon Symposium on Tribology, Tribology Series 14, Leeds University, Elsevier, Sept. 1988, pp. 269-276 (with S. Bair).
  93. "Friction-Induced Thermal Influences in Elastic Contact Between Spherical Asperities," TRANS. ASME, Journal of Tribology, Vol. 111, pp. 315-322, April 1989 (with B.-Y. Ting).
  94. "A Fundamental Tribological Study of Mo/Al2O3 in Sliding Contact," TRANS. ASME, Journal of Tribology, Vol. 111, pp. 504-509, July 1989 (with H. Hong).
  95. "The Evaluation of Materials for Tribological Applications", Material Research Society Symposium Proceedings, Vol. 140, 1989 Materials Research Society.
  96. "In-Situ Engineered Oxide Coatings," Leeds/Lyons Conference Proceedings, (September 1989), (with H. Hong).
  97. "Film Thickness and Frictional Behavior of Some Liquid Crystals in Concentrated Point Contacts," ACS Symposium Series - Tribology and the Liquid-Crystalline State, ACS Symposium Series 441, pp. 113-125, 198th National Meeting of the American Chemical Society, Miami, Florida (September 10-15, 1989) (with H. S. Lee, S. H. Winoto, Miin Chiu, and Stig E. Friberg).
  98. "The Effect of Anion Vacancies on the Tribological Properties of Rutile (TiO2-x), Part II: Experimental Evidence, STLE, Tribology Transactions, Vol. 33, pp. 209-220, April 1990, (with M. Gardos and H. Hong).
  99. "The High-Shear Stress Rheology of Liquid Lubricants at Pressures of 2 to 200 MPa, TRANS. ASME, Journal of Tribology, Vol. 112, pp. 246-253, April 1990 (with S. Bair).
  100. "A Technique for Measuring Roller Follower Skidding on Automotive Camshafts," Vehicle Tribology, Proceedings of the 17th Leeds-Lyon Symposium on Tribology held at the Institute of Tribology, Leeds University, Leeds, UK, Tribology Series 18, pp. 157-162, September 4-7, 1990, (with Scott Bair).
  101. "On the Effects of Automotive Engine Lubricants on the Friction and Wear Characteristics of Selected Ceramics Under Sliding Conditions," Vehicle Tribology, Proceedings of the 17th Leeds-Lyon Symposium on Tribology held at the Institute of Tribology, Leeds University, Leeds, UK, Tribology Series 18, pp. 471-476, September 4-7, 1990, (with F. S. Qureshi).
  102. "A Comparison Between the Thermomechanical Wear Model and Some Experimental Observations," TRANS. ASME, Journal of Tribology, Vol. 113, pp. 262-269, April 1991 (with J. Yang).
  103. "The High Pressure High Shear Stress Rheology of Liquid Lubricants," TRANS. ASME, Journal of Tribology, Vol. 114, pp. 1-8, January 1992 (with S. Bair).
  104. "Surface Engineering, an Enigma of Choices," J. Phys. D: Appl. Phys., Vol. 25, pp. A285-A291, January 1992 (with R. Cowan).
  105. "Frictional Heating Calculations," Friction, Lubrication, and Wear Technology, ASM Handbook, Vol. 18, (Materials Park: ASM), 1992, pp. 39-44 (with R. Cowan).
  106. "Experimental Investigations Into Shear Localization in an Operating EHD Contact," Leeds-Lyon Symposium on Tribology, Tribology Series 25, University of Leeds , Elsevier, Sept. 1992, pp. 383 388, (with S. Bair and K. W. Distin).
  107. "Application of the Thermomechanical Wear Transition Model to Layered Media," Leeds-Lyon Symposium on Tribology, Tribology Series 19, University of Leeds , Elsevier, Sept. 1992, pp. 631-639, (with R. S. Cowan).
  108. "A New High-Pressure, High-Shear Stress Viscometer and Results for Lubricants," Tribology Transactions - A Publication of the Society of Tribologists and Lubrication Engineers, Vol. 36, Number 4, pp.721-725, ('93), (with S. Bair).
  109. "Lubricant Rheological Properties at High Pressure," Lubrication Science, Vol. 5 No. 3, pp. 189-203, April 1993 (with S. Bair and F. Qureshi)
  110. "Prediction of Failure Transitions in Sliding Contacts by a Thermomechanical Wear Model," TRANS. ASME, Journal of Tribology, Vol. 115, pp. 432-439, July 1993 (with R. Cowan and J. Yang).
  111. "Observations of Shear Localization in Liquid Lubricants Under Pressure," TRANS. ASME, Journal of Tribology, Vol. 115, pp. 507-514, July 1993 (with S. Bair and F. Qureshi).
  112. "Shear band analysis for lubricants based on a viscoelastic plasticity model," Applied Mechaincs Review, 47, no. 6, part 2, June 1994, pp. S209-S220, Mechanics in the USA 1994, edited by AS Kobayashi, (with Y-K Lee, J. Ghosh, S. Bair).
  113. "A Rheological Basis for Concentrated Contact Friction," Proceedings of the 20th Leeds-Lyon Symposium on Tribology," Lyon, France 7-10 September 1993. Dissipative Processes in Tribology, Tribology Series, 27, 1994, pp. 37-44, 559; edited by D. Dowson (with S. Bair).
  114. "Thermal contact conductance across Si3N4-Si3N4 contact," Wear, vol 177, pp 25-32, 1994 (with T. Aikawa).
  115. "Thermomechanical Wear Modelling," Tribotest Journal 1-2, December 1994, pp. 111-123 (with R. Cowan).
  116. "Applcation of the Yasutomi Free Volume Model to Various Liquid Lubricants," Proceedings International Tribology Conference Yokohama 1995 (with S. Bair).
  117. "Health and Safety Improvement through Tribological Failure Analysis and Prediction," Technische Akademie Esslingen 10th International Tribology Colloquium, Stuttgart/Ostfildern, Germany, January 1996.
  118. "Emerging Technologies for Machinery Diagnosis and Prognosis," 10th International Congress and Exposition on Condition Monitoring and Diagnostic Engineering Management, Espoo, Finland, June 1997.
  119. "A Simple Formula for Predicting Film Thickness of Non-Newtonian Liquids," Proceedings of Leeds-Lyon Symposium on Tribology, Vol. 23, September 1996 (with S. Bair).
  120. "High Pressure Rheology of Lubricants and Limitations of the Reynolds Equation" World Tribology Congress, London, September 1997 (with S. Bair, M. Khonsari).
  121. "High-pressure rheology of lubricants and limitations of the Reynolds Equation", Tribology International, Volume 31, No. 10, February 26,1999, pp. 573-586 (with S. Bair, M. Khonsari).
  122. "The Pressure-Viscosity Coefficient at Hertz Pressure and its Relation to Concentrated Contact Traction," Thinning Films and Tribological Interfaces, Elsevier, 2000, pp.433-443 (with S. Bair).
  123. "The Temperature, Pressure, and Time Dependence of Viscosity," Tribology International, 34(7), pp. 461-468, 2001 (with S. Bair and J. Jarzynski).
  124. "Emerging Sensor Technologies Tackle Mechanical Failure," Machine Plant & Systems Monitor, May/June 1999, pp.19-22 (with R.S. Cowan).
  125. "Engineering Technology for Condition-Based Maintenance," STLE Lubrication Engineering, July 1999, pp. 43-45 (with R.S. Cowan).
  126. "Research Developments in Integrated Diagnostics and Prognostics," Structural Health Monitoring 2000, ed. F-K. Chang, Technomic Publishing, 1999, pp. 237-246 (with R.S. Cowan).
  127. "Diagnositc and Prognostic Tools for Machinary Health Monitoring," Proc. 13th Intl. Congress COMADEM, eds. H.C. Pusey and R.B.K.N. Rao, Vibration Insitutue, 2000, pp. 577-586 (with R. Cowan).
  128. "A Study of Mechanical Shear Bands in Liquids at High Pressure", XIII Intrn. Cong. Rheology, Vol 3, pp. 191-193, 2000 (with S. Bair).
  129. "Online Delivery of the MSME Program from Georgia Tech", International Journal of Engineering Education, Volume 17 Number 2, 2001, p. 131-137 (with W. Wepfer, J. DiGregorio, G. Wright and J. Boland).
  130. "The Measurement of Viscosity of Liquids Under Tension", Transactions of ASME, Journal of Tribology, vol 125, pp. 260-266, 2003 (with P. A. Kottke and S. Bair).
  131. "Cavitation in Creeping Shear Flows", AIChE Journal, Vol. 58, No. 8, pp. 2150-2170, 2005 (with P. A. Kottke and S. Bair).
  132. "A Quantitative Test of the Einstein-Debye Relation for Low Molecular Weight Liquids using the Shear Dependence of Viscosity", Trib. Letters, Vol.26, No.3, 2007, pp.223-228, (with S. Bair)

Books

  1. An Analytical and Experimental Investigation in Similar Solutions of Three-dimensional Laminar Incompressible Boundary Layers, Ph.D. Dissertation, University of Michigan, University Microfilm, Ann Arbor, Michigan (1961).
  2. Silicone Films - Their Action as Boundary Lubricants, Ph.D. Dissertation, University of Cambridge, Cambridge, England (June 1963).
  3. "Lubrication in High Pressure Metal Working Processes", Chapter in High Pressure Metal Working, published by Pennsylvania State University, PENNTAP Program (1968).
  4. Proceedings of Tribology Workshop, The Industrial Technology Program, Mechanics Section, Engineering Division, The National Science Foundation (April 1974) (677 pp) (edited with H. S. Cheng and F. F. Ling).
  5. Concentrated Contact Lubrication, Short Course Notes (1978) (275 pp) (with H. S. Cheng).
  6. Wear Control Handbook, ASME (1980) (co-editor with M. B. Peterson) (1358 pp).
  7. "Film Thickness, Contact Stress and Surface Temperatures," Chapter in Wear Control Handbook (1980) (edited by M. B. Peterson and W. O. Winer) (with H. S. Cheng).
  8. Technical Editor, Transactions ASME, Journal of Lubrication Technology (June 1980-June 1983), Journal of Tribology (January 1984).
  9. "Lubricants," a chapter (60 pp) in Tribological Technology, A NATO Advanced Studies Institute (September 1981).
  10. "Lubrication," a chapter (67 pp) in Tribological Technology, A NATO Advanced Studies Institute (September 1981).
  11. Research Needs in Mechanical Systems: Report of the Select Panel on Research Goals and Priorities in Mechanical Systems (prepared for NSF Mechanical Engineering and Applied Mechanics Division of NSF), ASME Special Publication (1983) (with K. N. Reid, H. H. Richardson, M. J. Rabins, R. Cohen, J. A. Callahan, R. E. Garrett and D. T. Koenig).
  12. Research Needs in Thermal Systems: Report of the Select Panel on Research Goals and Priorities in Thermal Systems (prepared for the National Science Foundation), ASME Special Publication 1986 (with A. E. Bergles, C. J. Cremers, R. H. Sabersky, W. A. Sirignano and J. W. Westwater).
  13. New Materials Approaches to Tribology: Theory and Applications, MRS (1988) (co-editor with Larry E. Pope and Larry L. Fehrenbacher) (524 pp).
  14. Proceedings of the U.S./Taiwan Joint Symposium on Tribology, National Taiwan University, Taipei, Nov. 5-8, 1989, (co-editor with S.-S. Lu) (283 pp).
  15. Development of a Theory of the Wear of Ceramics, final research report sponsored by the U.S. Department of Energy, Tribology Program, under contract DE-AC05-840R21400 with Martin Marietta Energy Systems, Inc., 1993 (with R. S. Cowan) (100 pp).
  16. ONR/GT Proceedings of Workshop on Condition-Based Monitoring Systems, 1994 (Edited by Ward O. Winer and R. S. Cowan).
  17. "Research Developments in Integrated Diagnostics and Prognostics" in Structural Health Monitoring 2000, ed. F-K Chang, Technomic Publishing, 1999, pp.237-246 (with R. S. Cowan).
  18. "Technologies for Machinery Diagnosis and Prognosis", Modern Handbook of Tribology, ed. B. Bhushan, CRC Press, 2000 (with R. S. Cowan).
  19. "Condition Monitoring Tools for Tribologists," Proceedings NATO-ASI Conference on the Fundamentals of and Bridging the Gap bewteen Nano and Micro/Macroscale Tribology, ed. B. Bushan, Kluhwer Press, 2000 (with R. S. Cowan).
  20. "Machinery Diagnostics", Chapter 22 in Tribologie-Handbuch, Vieweg+Teubner Verlag, 2010. pp 757, Horst Czichos and Karl-Heinz Habig (with R. S. Cowan)