CEE Faculty Profile

Ward O. Winer, Ph.D., P.E.

School Chair Emeritus

Office: Mason 128
Address:

790 Atlantic Drive, N.W.
Atlanta, GA  30332-0355
Phone: (404) 894-2201
Email: ward.winer@ce.gatech.edu

Dr. Winer served as Chair of the George W. Woodruff School of Mechanical Engineering from 1988 through 2007. He received his Ph.D. in Mechanical Engineering from the University of Michigan in 1961 and a Ph.D. in Physics from Cambridge University in England in 1964. He served on the faculty of mechanical engineering at the University of Michigan from 1963 to 1969 when he joined the faculty of mechanical engineering at Georgia Institute of Technology. Dr. Winer has more than 200 publications and is a Fellow of ASME, STLE, AAAS, and ASEE. In addition, he is a member of the National Academy of Engineers and holds several honors and awards, including the 1995 ASEE Benjamin Garver Lamme Award, the ASME Melville Medal, and the Tribology Gold Medal of the British Tribology Trust. He is also a recipient of the STLE International Award in 1996. In 2006, he was named an Honorary Member of ASME. His fields of interest include tribology, rheology, fluid mechanics and condition monitoring of mechanical systems as well as engineering education.

Dr. Winer is or has been on advisory boards for mechanical engineering programs at the University of Michigan, the University of Maryland, Carnegie Mellon University, and the University of California – Berkeley, Virginia Tech, and MIT. He is Chair of the ASME Foundation Board of Directors. He recently chaired a National Research Council Study to Benchmark the Competitiveness of the U.S. in Mechanical Engineering Basic Research. He served on the Steering Committee for the Committee on Recommendations for U.S. Army Basic Research (Member July 1982-June 1990; Chair June 1984-June 1987). Currently he chairs the Engineering, Applied Science and Math Panel of the National Research Council Associateship Programs of the National Academy.

Ward is married to Mary Jo Wielinga Winer. They have four grown children and eleven grandchildren.

Research Interests

  • Tribology
  • Rheology
  • Fluid Mechanics
  • Condition Monitoring of Mechanical Systems
  • Engineering education

Education

  • Ph.D. Physics, Cambridge University (1964)
  • Ph.D. Mechanical Engineering, University of Michigan (1961)
  • M.S.E. University of Michigan (1959)
  • B.S.E. University of Michigan (1958)

Honors

  1. Postdoctoral Fellowship - University of Michigan: Institute of Science & Technology (1961-1963 at Cavendish Laboratory - Cambridge University), 1961
  2. '38e Distinguished Service Award to an Outstanding Young Faculty Member of the College of Engineering, The University of Michigan, 1967
  3. Georgia Tech Faculty of the Year, Graduate Student Government, 1986
  4. ASME - Engineer of the year in Education (Atlanta Section ASME), 1986
  5. ASME - Charles Russ Richards Memorial Award (ASME & Pi Tau Sigma), 1988
  6. ASME - Fellow (1980), Life Fellow, 2001
  7. ASME - Honorary Member, 2006
  8. NASA - Certificate of Recognition, 1977
  9. AAAS - Fellow, 1988
  10. STLE - Fellow, 1992
  11. The Jacob Wallenberg Foundation, Royal Swedish Academy of Engineering Sciences, 1983
  12. Tribology Gold Medal from the Tribology Trust of the Institution of Mechanical Engineers, Institution of Production Engineers, the Royal Aeronautical Society and the Department of Industry and Trade, Great Britain, 1986
  13. Boss of the Year, Cobb 20th Century Chapt-American Business Women's Assoc, 1982
  14. "Ga Tech Night - Honor Program - Ward O. Winer for 25 Years of Service to Tribology," Atlanta Section of Society of Tribologists and Lubrication Engineers, November 9, 1987
  15. National Academy of Engineering, 1988
  16. Metropolitan Atlanta Engineer of the Year in Education, 1988
  17. Engineers of Greater Atlanta, Engineer of the Year, 1989
  18. ASEE - Fellow, 2004

Awards

  1. Alumni Society Merit Award for the Department of Mechanical Engineering and Applied Mechanics, The University of Michigan, 1998
  2. The Monie A. Ferst Memorial Sigma Xi Award for Sustained Research at Ga Tech, 1975
  3. Distinguished Professor Award, Georgia Institute of Technology, 1987
  4. Georgia Tech Human Relations Director's Award (to Woodruff School), 1991
  5. ASME - Melville Medal, 1975
  6. ASME - Centennial Medallion, 1980
  7. ASME - Best Paper Award (ASME Tribology Division), 1984, 1991
  8. ASME - Mayo D. Hersey Award, 1986
  9. NLGI - 47th Annual Meeting - Clarence E. Earle Memorial Award, 1979
  10. NLGI - Author of the Year Award, 1987
  11. STLE - International Award, 1997
  12. ASEE - Benjamin Garver Lamme Award, 1995
  13. ASEE - Donald E. Marlowe Award, 1996

Articles

  1. "Dynamic Response of Fluid and Wall Temperatures during Pressurized Discharge of a Liquid from a Container," Advances in Cryogenic Engineering 6 (1961) 310-322 (with V. S. Arpaci and J. A. Clark).
  2. "Generalization of a Class of Solutions of the Laminar Incompressible, Boundary-Layer Equations," TRANS. ASME 83D (196l) 328-332 (with A. G. Hansen).
  3. "Boundary-layer Energy Equation," Journal of Aerospace Science 29, No. 6 (1962) 750-751.
  4. "Lubrication of Metals with Silicones at High Pressures and Low Sliding Speeds," Gear Lubrication, Institute of Petroleum, London, England (1966) 11:35-37 (with D. Tabor).
  5. "Silicone Fluids - Their Action as Boundary Lubricants," TRANS. ASLE 8 (1965) 69-77 (with D. Tabor).
  6. "Molybdenum Disulfide as a Lubricant: A Review of the Fundamental Knowledge," Wear 10, No. 6 (1967) 422-452.
  7. "Some Measurements of High Pressure Lubricant Rheology," TRANS. ASME, Journal of Lubrication Technology 90, No. 3 (July 1968) 580-591 (with J. D. Novak).
  8. "A Correlation of Bulk Modulus and PVT Data for Silicone Fluids at Pressures up to 500,000 psi," TRANS. ASLE 11 (October 1968) 338-344 (with J. A. Tichy).
  9. "The Effect of Pressure on the Non-Newtonian Behavior of Polymer Blended Petroleum Oils," TRANS. ASME, Journal of Lubrication Technology 91, No. 3 (1969) 459-463 (with J. D. Novak).
  10. (Editor) "Proceedings of ASME-ASTM-ASLE Symposium on Lubrication and Lubricant Rheology," TRANS. ASME, Journal of Lubrication Technology 90, No. 3 (July 1968) 525-613.
  11. "Inertial Considerations in Parallel Circular Squeeze-Film Bearings," TRANS. ASME, Journal of Lubrication Technology 92 (1970) 588-592 (with J. A. Tichy).
  12. "Fluid Rheological Effects in Sliding Elastohydrodynamic Point Contacts with Transient Loading: 1 - Film Thickness," TRANS. ASME, Journal of Lubrication Technology 93 (1971) 262-271 (with D. M. Sanborn).
  13. "Fluid Rheological Effects in Sliding Elastohydrodynamic Point Contacts: II - Traction," TRANS. ASME, Journal of Lubrication Technology 93 (1971) 342-348 (with D. M. Sanborn).
  14. "A Note on the Analysis of Thermal Effects in a Full Journal Bearings," TRANS. ASME, Journal of Lubrication Technology 93, No. 4 (1971) 514-515.
  15. "A Viscometer for High-Pressure Use and Some Results," TRANS. ASME, Journal of Basic Engineering 94, No. 3D (September 1972) 586-589.
  16. "Some Observations of the Relationship between Film Thickness and Load in High Hertz Pressure Elastohydrodynamic Contacts," TRANS. ASME, Journal of Lubrication Technology 95 (1973) 386-390 (with D. M. Sanborn and D. Lee).
  17. "Simulation of Severe Shear Conditions in Lubrication," Viscometry and Its Application to Automotive Lubricants, Society of Automotive Engineers SP-382 (1973) 59-67 (with J. Jakobsen and D. M. Sanborn).
  18. "Pressure Viscosity Characteristics of a Series of Siloxanes," TRANS. ASME, Journal of Lubrication Technology 96 (1974) 410-417 (with J. Jakobsen and D. M. Sanborn).
  19. "Temperature Measurements in Sliding Elastohydrodynamic Point Contacts," TRANS. ASME, Journal of Lubrication Technology 96 (1974) 464-471 (with V. Turchina and D. M. Sanborn).
  20. "Traction of Elastohydrodynamic Contacts with Thermal Shearing Flow," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (1975) 424-429 (with J. Jakobsen).
  21. "Dissipative Heating Effects and EHD Corrections for Viscous Newtonian Flow in High Shear Stress Capillary Viscometry," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (1975) 424-478 (with J. Jakobsen).
  22. "High Shear Stress Behavior of some Representative Lubricants," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (1975) 479-485 (with J. Jakobsen).
  23. "Pressure-Viscosity Measurements for several Lubricants to 5.5 x 108 N/m2 (8 x 104 psi) and 149C (300F)," TRANS. ASLE 18, No.4 (1975) 249-262 (with W. R. Jones, R. L. Johnson and D. M. Sanborn).
  24. "The Viscous Lubrication of Rolling and Sliding Rigid Cylinders," TRANS. ASME, Journal of Lubrication Technology 97F, No. 2 (April 1975) 180-186 (with S. F. Carlson).
  25. "SI Units for Readers and Authors in Lubrication Technology," TRANS. ASME, Journal of Lubrication Technology 96 (1974) (two pages on back cover of issues No. 2, 3, 4).
  26. "Polymer Degradation in Elastohydrodynamic Lubrication," Proceedings of International Colloque on Polymers and Lubrication, C.N.R.S., Brest, France (1974) (with D. Walker and D. M. Sanborn).
  27. "Simulation of Severe Shear Conditions in Lubrication," Proceedings of Society of Automotive Engineers (1974) (with J. Jakobsen and D. M. Sanborn).
  28. "Dynamics of Roller Bearings considering Elastohydrodynamic Forces," Proceedings of Japanese Society of Lubrication Engineers/American Society of Lubrication Engineers Joint International Meeting, Tokyo, Japan II (June 1975) 9-16.
  29. "The Mechanical Properties of Fluids in High Pressure Hydraulic Systems," Proceedings of National Fluid Power Conference XXVIII (1974) 412-421.
  30. "Molecular Degradation of Lubricants in Sliding Elastohydrodynamic Contacts," TRANS. ASME, Journal of Lubrication Technology 97, No. 3 (July 1975) 390-397 (with D. L. Walker and D. M. Sanborn).
  31. "Prediction of Traction in Sliding EHD Contacts," TRANS. ASME, Journal of Lubrication Technology 98, No. 3 (July 1976) 362-366 (with R. Kunz).
  32. "Infrared Temperature Mapping in Elastohydrodynamics Lubrication," TRANS. ASME, Journal of Lubrication Technology 98 (April 1976) 236-243 (with V. K. Ausherman, H. S. Nagaraj and D. M. Sanborn).
  33. "Effects of Load, Speed and Surface Roughness on Sliding EHD Contact," TRANS. ASME, Journal of Lubrication Technology 99, No. 2 (April 1977) 254-263 (with H. S. Nagaraj and D. M. Sanborn).
  34. "Chemical Effects in Contact Fatigue: Part III - Load-Life Exponent, Life Scatter and Overall Analysis," TRANS. ASME, Journal of Lubrication Technology 98, No. 2 (1976) 308-318 (with W. E. Littmann, B. W. Kelley, W. J. Anderson, R. S. Fein, E. E. Klaus and L. B. Sibley).
  35. "Fluid Film Bearing Housing Design for a Hot Ambient Environment," ASME Paper No. 76-GT-93 (with J. D. McHugh and G. D. Robson).
  36. "Dynamics of Roller Bearings considering Elastohydrodynamic Forces," TRANS. ASLE 19, No. 4 (1976) 267-272 (with M. A. Molina and D. M. Sanborn).
  37. "A New Look at Wear Metal Analysis," SAE Paper No. 770085 (with M. L. Land and C. Schwarz).
  38. "Ferrographic Analysis of Wear Debris generated in a Sliding EHD Contact," TRANS. ASLE 21, No. 3 (July 1978) 181-190 (with W. R. Jones and H. S. Nagaraj).
  39. "Light-Scattering Study of the Glass Transition in Lubricants," TRANS. ASME, Journal of Lubrication Technology 100, No. 2 (July 1978) 418-422 (with M. A. Alsaad, F. D. Medina and D. C. O'Shea).
  40. "Asperity Interactions in EHD Contacts," TRANS. ASME, Journal of Lubrication Technology 100, No. 1 (April 1978) 246-253 (with H. S. Nagaraj and D. M. Sanborn).
  41. "Glass Transitions in Lubricants: Its Relation to EHD Lubrication," TRANS. ASME, Journal of Lubrication Technology 100, No. 2 (July 1978) 404-417 (with M. Alsaad, S. Bair and D. M. Sanborn).
  42. "Glass Transitions in Lubricants: Its Relation to Elastohydrodynamic Lubrication (EHD)," Bulletin of the Japan Petroleum Institute 19, No. 1 (May 1977) (with M. Alsaad, S. Bair and D. M. Sanborn).
  43. "Direct Surface Temperature Measurement by Infrared Radiation in EHD and the Correlation of the Blok Flash Temperature Theory," Wear 49 (1978) 43-59 (with H. S. Nagaraj and D. M. Sanborn).
  44. "An Investigation into the Influence of Fluid Viscoelasticity in a Squeeze Film Bearing," TRANS. ASME, Journal of Lubrication Technology 100, No. 1 (1978) 56-64 (with J. Tichy).
  45. "A Review of Thermal Phenomena in EHD," Leeds/Lyons Conference Proceedings, Mechanical Engineering Publications, Ltd. London, (September 1978), pp. 125-130.
  46. "Rheological Response of Lubricants in EHD Contacts," Leeds/Lyons Conference Proceedings, Mechanical Engineering Publications, Ltd. (September 1978).
  47. "The Effect of Surface Roughness on Surface Temperature Fluctuations in EHD Contacts," Leeds/Lyons Conference Proceedings Mechanical Engineering Publications, Ltd. (September 1978).
  48. "Surface Temperature Measurements in Rolling and Sliding EHD Contacts," TRANS. ASLE 22, No. 3 (July 1979) 277-285 (with D. M. Sanborn).
  49. "Shear Strength Measurements of Lubricants at High Pressure," TRANS. ASME, Journal of Lubrication Technology 101, No. 3 (July 1979) 251-257 (with S. Bair).
  50. "A Rheological Model for Elastohydrodynamic Contacts based on Primary Laboratory Data," TRANS. ASME, Journal of Lubrication Technology 101, No. 3 (July 1979) 258-265 (with S. Bair).
  51. "Simultaneous Temperature Mapping and Traction Measurements in EHD Contacts," Proceedings Leeds/Lyons Conference 1979, IPC Science and Technology Publishing Company (1980).
  52. "Lubricant Limiting Shear Stress Effect on EHD Film Thickness," TRANS. ASME, Journal of Lubrication Technology 102, No. 2 (April 1980) 213-221 (with B. Gecim).
  53. "Some Observations on the Relationship between Lubricant Mechanical and Dielectric Transitions under Pressure," TRANS. ASME, Journal of Lubrication Technology 102, No. 2 (April 1980) 229-235 (with S. Bair).
  54. "Tribological Experience with Hard Coats on Soft, Metallic Substrates," Wear 60 (1980) 413-419 (with S. Bair and S. Ramalingam).
  55. "Reactively Sputtered Titanium Nitride Coatings for Tribological Applications," International Journal of Thin Solid Films 73 (1980) 267-274 (with S. Ramalingam).
  56. "An Experimental Evaluation of the Hamrock and Dowson Minimum Film Thickness Equation for fully Flooded EHD Point Contacts," TRANS. ASME, Journal of Lubrication Technology 103, No. 2 (April 1981) 284-294 (with K. A. Koye).
  57. "A Film Thickness Analysis of Line Contacts under Pure Rolling Conditions with a non-Newtonian Rheological Model," TRANS. ASME, Journal of Lubrication Technology 103, No. 2 (April 1981) 305-316 (with B. Gecim).
  58. "Magnetron Sputtering of non-Ferrous Aerospace Alloys for Wear Protection," International Journal of Thin Solid Films 80 (1981) 297-303 (with S. Ramalingam and Y. Shimazaki).
  59. "Friction/Traction Measurements with continuously Variable Slide-Roll Ratio and Side Slip at various Lambda Ratios," Proceedings of Leeds/Lyon Conference 1980, IPC Science & Technology Press Ltd (1981) 296-301 (with S. Bair).
  60. "Preliminary Evaluation of Ion Implantation as a Surface Treatment to Reduce Wear of Tool Bits," NRL Memorandum Report No. 4614, Sept. 1981, 55 pages, (with S. Ramalingam).
  61. "Tribological Characteristics of Sputtered Thin Films in Rolling Hertzian Contacts," International Journal of Thin Solid Films 84, (1981) 273-279 (with S. Ramalingam and S. Bair).
  62. "Infrared Temperature Measurements of a Reciprocating Seal Test," Proceedings 9th Leeds-Lyon Symposium, IPC Science and Technology Press Ltd. (1982) 321-328 (with M. A. Meinders and D. F. Wilcock).
  63. "Coatings for Wear Reduction in Reciprocating Machinery," Proceedings 9th Leeds-Lyon Symposium, Butterworth's (1982) 212-222 (with S. Ramalingam).
  64. "Some Observations in High Pressure Rheology of Lubricants," ASME TRANS. Journal of Lubrication Technology 104, No. 3 (July 1982) (S. Bair) 357-364.
  65. "Regimes of Traction in Concentrated Contact Lubrication," TRANS ASME, Journal of Lubrication Technology 104, No. 3 (July 1982) (S. Bair) 382-386.
  66. "Steady Temperature in a Rotating Cylinder subject to Surface Heating and Convective Cooling," presented at ASLE/ASME Lubrication Conference, Hartford, Connecticut (October 1983) TRANS. ASME, Journal of Tribology 106, No. 1 (January 1984) (with B. Gecim) 120-127.
  67. "An Application of a Free Volume Model to Lubricant Rheology I - Dependence of Viscosity of Temperature and Pressure," TRANS. ASME, Journal of Tribology 106, No. 2 (April 1984) (with S. Bair and S. Yasutomi) 291-303.
  68. "An Application of a Free Volume Model to Lubricant Rheology II - Variation in Viscosity of Binary Blended Lubricants," TRANS. ASME, Journal of Tribology 106, No. 2 (April 1984) (with S. Bair and S. Yasutomi) 304-312.
  69. "Research Needs in Mechanical Systems," Mechanical Engineering, ASME (March 1984) 29-43 (with K .N. Reid, R. Cohen, R. E. Garrett, M. J. Rabins and H. H. Richardson).
  70. "An Application of a Free Volume Model to Lubricant Rheology 1 - Dependence of Viscosity on Temperature and Pressure," Proceedings of the 1983 Japanese Society of Lubrication Engineers Annual Meeting, Nagasaki, Japan, (in Japanese with S. Yasutomi and S. Bair).
  71. "An Application of a Free Volume Model to Lubricant Rheology 2 - Variation in Viscosity of Binary Blended Lubricants," Proceedings of the 1983 Japanese Society of Lubrication Engineers Annual Meeting, Nagasaki, Japan, (in Japanese with S. Yasutomi and S. Bair).
  72. "An Analysis of Lubricant Viscosity by a Free Volume Model," Proceedings of the 1985 Annual Meeting of the Japanese Society of Lubrication Engineers (in Japanese with S. Yasutomi and S. Bair).
  73. "Effect of a Surface Film on the Surface Temperatures of a Rotating Cylinder," TRANS. ASME, Journal of Tribology, 108, No. 1, pp. 92-97 (1986) (with B. Gecim).
  74. "Transient Temperatures in the Vicinity of an Asperity Contact," TRANS. ASME, Journal of Tribology, 107, No. 3, pp. 333-342, (1985) (with B. Gecim).
  75. "A Semi-Quantitative Method for Thin Film Adhesion Measurement, TRANS. ASME, Journal of Tribology, 107, No. 4, pp. 472-477, 1985, (with B. Ting and S. Ramalingam).
  76. "An Experimental Investigation of the Film-to-Substrate Bond Strength of Sputtered Thin Films using a Semi-Quantitative Test Method," TRANS. ASME, Journal of Tribology, 107, No. 4, pp. 478-482, 1985 (with B. Ting and S. Ramalingam).
  77. "Thermal Resistance of a Tapered Roller Bearing," TRANS. ASLE, Vol. 29, No. 4, Oct. 1986, pp. 539-547 (with B. Gecim and S. Bair).
  78. "The Tribological Behavior of an Automotive Cam and Flat Lifter System," TRANS. ASME, Journal of Tribology, 108, No. 3, 1986, pp. 478-486 (with S. Bair and J. Griffioen).
  79. "Steady State Friction Behavior of Sputtered MoS2 Solid Lubricants," Proceedings, JSLE, International Tribology Conference, Vol. II, p. 425, 1985 (with Y. Shimazaki).
  80. "Frictional Behavior of Sputtered Titanium Nitride," Wear, Vol. 117, No. 2, pp. 161-177, 1987 (with Y. Shimazaki).
  81. "Infrared Surface Temperature Measurements in a Sliding Ceramic-Ceramic Contact," Butterworths Publishing, Proceeding Leeds-Lyon Symposium 1985, Mechanisms, and Surface Distress, Dowson, Taylor, Godet, and Berthe, editors, pp. 238-245 (with J. Griffioen).
  82. "On the Traction and Film Thickness Behavior of Greases in Concentrated Contacts," NLGI Spokesman, August 1986, pp. 162-174 (with F. Rastegar).
  83. "Temperature Measurement of Microscopic Areas within a Simulated Head/Tape," Trans. ASME, Journal of Tribology, 108, No. 1, pp. 29-34 1986 (with B. Bhushan, R. Gulino and S. Bair).
  84. "The State of Tribology Research and Activity in the USA," Invited Plenary Lecture at the JSLE International Tribology Conference, Tokyo, July 1985, Lubrication, Vol 31, No. 1, Journal of Japan Society of Lubrication Engineers (also translated into Chinese and German for publication), 1986.
  85. "Steady State Temperatures in a Rotating Cylinder - Some Variations on Geometry and Thermal Boundary Condition," TRANS. ASME Journal of Tribology, 108, No. 3, 1986, pp. 446-454 (with B. Gecim).
  86. "Research Needs in Thermal Systems," Mechanical Engineering, ASME August 1986, (with A. E. Bergles, C. J. Cremers, W. A. Sirignano and J. W. Westwater).
  87. "Thermal Aspects of Oxidational Wear," Thermomechanical Effects in Sliding Systems, F. E. Kennedy, Jr., ed., Elsevier-Sequoia, Wear 102, 1985, pp. 67-80 (with T.F.J. Quinn).
  88. "An Experimental Study of the 'hot-spots' Occurring During the Oxidational Wear of Tool Steel on Sapphire," TRANS. ASME, Journal of Tribology, 109, No. 2, pp. 315-320, April 1987 (with T.F.J. Quinn).
  89. "Shear Rheological Characterization of Motor Oils," ASLE Transactions, Vol. 31, No. 3, 1988, pp. 317-324 (with S. Bair).
  90. "The Influence of Ambient Pressure on the Apparent Shear Thinning of Liquid Lubricants: An Overlooked Phenomena," Proceedings of the Institution of Mechanical Engineers Conference" Tribology 50 Years On," July 1-3, 1987, pp. 395-398 (with S. Bair).
  91. "Thermal Conductivity of Lubricants at High Pressures," TRANS. ASME, Journal of Tribology, Vol. 109, pp. 566-567, July 1987 (with B. Gecim).
  92. "Tribological Characteristics of Needle Bearings," Proceedings of the 15th Leeds-Lyon Symposium on Tribology, Tribology Series 14, Leeds University, Elsevier, Sept. 1988, pp. 269-276 (with S. Bair).
  93. "Friction-Induced Thermal Influences in Elastic Contact Between Spherical Asperities," TRANS. ASME, Journal of Tribology, Vol. 111, pp. 315-322, April 1989 (with B.-Y. Ting).
  94. "A Fundamental Tribological Study of Mo/Al2O3 in Sliding Contact," TRANS. ASME, Journal of Tribology, Vol. 111, pp. 504-509, July 1989 (with H. Hong).
  95. "The Evaluation of Materials for Tribological Applications", Material Research Society Symposium Proceedings, Vol. 140, 1989 Materials Research Society.
  96. "In-Situ Engineered Oxide Coatings," Leeds/Lyons Conference Proceedings, (September 1989), (with H. Hong).
  97. "Film Thickness and Frictional Behavior of Some Liquid Crystals in Concentrated Point Contacts," ACS Symposium Series - Tribology and the Liquid-Crystalline State, ACS Symposium Series 441, pp. 113-125, 198th National Meeting of the American Chemical Society, Miami, Florida (September 10-15, 1989) (with H. S. Lee, S. H. Winoto, Miin Chiu, and Stig E. Friberg).
  98. "The Effect of Anion Vacancies on the Tribological Properties of Rutile (TiO2-x), Part II: Experimental Evidence, STLE, Tribology Transactions, Vol. 33, pp. 209-220, April 1990, (with M. Gardos and H. Hong).
  99. "The High-Shear Stress Rheology of Liquid Lubricants at Pressures of 2 to 200 MPa, TRANS. ASME, Journal of Tribology, Vol. 112, pp. 246-253, April 1990 (with S. Bair).
  100. "A Technique for Measuring Roller Follower Skidding on Automotive Camshafts," Vehicle Tribology, Proceedings of the 17th Leeds-Lyon Symposium on Tribology held at the Institute of Tribology, Leeds University, Leeds, UK, Tribology Series 18, pp. 157-162, September 4-7, 1990, (with Scott Bair).
  101. "On the Effects of Automotive Engine Lubricants on the Friction and Wear Characteristics of Selected Ceramics Under Sliding Conditions," Vehicle Tribology, Proceedings of the 17th Leeds-Lyon Symposium on Tribology held at the Institute of Tribology, Leeds University, Leeds, UK, Tribology Series 18, pp. 471-476, September 4-7, 1990, (with F. S. Qureshi).
  102. "A Comparison Between the Thermomechanical Wear Model and Some Experimental Observations," TRANS. ASME, Journal of Tribology, Vol. 113, pp. 262-269, April 1991 (with J. Yang).
  103. "The High Pressure High Shear Stress Rheology of Liquid Lubricants," TRANS. ASME, Journal of Tribology, Vol. 114, pp. 1-8, January 1992 (with S. Bair).
  104. "Surface Engineering, an Enigma of Choices," J. Phys. D: Appl. Phys., Vol. 25, pp. A285-A291, January 1992 (with R. Cowan).
  105. "Frictional Heating Calculations," Friction, Lubrication, and Wear Technology, ASM Handbook, Vol. 18, (Materials Park: ASM), 1992, pp. 39-44 (with R. Cowan).
  106. "Experimental Investigations Into Shear Localization in an Operating EHD Contact," Leeds-Lyon Symposium on Tribology, Tribology Series 25, University of Leeds , Elsevier, Sept. 1992, pp. 383 388, (with S. Bair and K. W. Distin).
  107. "Application of the Thermomechanical Wear Transition Model to Layered Media," Leeds-Lyon Symposium on Tribology, Tribology Series 19, University of Leeds , Elsevier, Sept. 1992, pp. 631-639, (with R. S. Cowan).
  108. "A New High-Pressure, High-Shear Stress Viscometer and Results for Lubricants," Tribology Transactions - A Publication of the Society of Tribologists and Lubrication Engineers, Vol. 36, Number 4, pp.721-725, ('93), (with S. Bair).
  109. "Lubricant Rheological Properties at High Pressure," Lubrication Science, Vol. 5 No. 3, pp. 189-203, April 1993 (with S. Bair and F. Qureshi)
  110. "Prediction of Failure Transitions in Sliding Contacts by a Thermomechanical Wear Model," TRANS. ASME, Journal of Tribology, Vol. 115, pp. 432-439, July 1993 (with R. Cowan and J. Yang).
  111. "Observations of Shear Localization in Liquid Lubricants Under Pressure," TRANS. ASME, Journal of Tribology, Vol. 115, pp. 507-514, July 1993 (with S. Bair and F. Qureshi).
  112. "Shear band analysis for lubricants based on a viscoelastic plasticity model," Applied Mechaincs Review, 47, no. 6, part 2, June 1994, pp. S209-S220, Mechanics in the USA 1994, edited by AS Kobayashi, (with Y-K Lee, J. Ghosh, S. Bair).
  113. "A Rheological Basis for Concentrated Contact Friction," Proceedings of the 20th Leeds-Lyon Symposium on Tribology," Lyon, France 7-10 September 1993. Dissipative Processes in Tribology, Tribology Series, 27, 1994, pp. 37-44, 559; edited by D. Dowson (with S. Bair).
  114. "Thermal contact conductance across Si3N4-Si3N4 contact," Wear, vol 177, pp 25-32, 1994 (with T. Aikawa).
  115. "Thermomechanical Wear Modelling," Tribotest Journal 1-2, December 1994, pp. 111-123 (with R. Cowan).
  116. "Applcation of the Yasutomi Free Volume Model to Various Liquid Lubricants," Proceedings International Tribology Conference Yokohama 1995 (with S. Bair).
  117. "Health and Safety Improvement through Tribological Failure Analysis and Prediction," Technische Akademie Esslingen 10th International Tribology Colloquium, Stuttgart/Ostfildern, Germany, January 1996.
  118. "Emerging Technologies for Machinery Diagnosis and Prognosis," 10th International Congress and Exposition on Condition Monitoring and Diagnostic Engineering Management, Espoo, Finland, June 1997.
  119. "A Simple Formula for Predicting Film Thickness of Non-Newtonian Liquids," Proceedings of Leeds-Lyon Symposium on Tribology, Vol. 23, September 1996 (with S. Bair).
  120. "High Pressure Rheology of Lubricants and Limitations of the Reynolds Equation" World Tribology Congress, London, September 1997 (with S. Bair, M. Khonsari).
  121. "High-pressure rheology of lubricants and limitations of the Reynolds Equation", Tribology International, Volume 31, No. 10, February 26,1999, pp. 573-586 (with S. Bair, M. Khonsari).
  122. "The Pressure-Viscosity Coefficient at Hertz Pressure and its Relation to Concentrated Contact Traction," Thinning Films and Tribological Interfaces, Elsevier, 2000, pp.433-443 (with S. Bair).
  123. "The Temperature, Pressure, and Time Dependence of Viscosity," Tribology International, 34(7), pp. 461-468, 2001 (with S. Bair and J. Jarzynski).
  124. "Emerging Sensor Technologies Tackle Mechanical Failure," Machine Plant & Systems Monitor, May/June 1999, pp.19-22 (with R.S. Cowan).
  125. "Engineering Technology for Condition-Based Maintenance," STLE Lubrication Engineering, July 1999, pp. 43-45 (with R.S. Cowan).
  126. "Research Developments in Integrated Diagnostics and Prognostics," Structural Health Monitoring 2000, ed. F-K. Chang, Technomic Publishing, 1999, pp. 237-246 (with R.S. Cowan).
  127. "Diagnositc and Prognostic Tools for Machinary Health Monitoring," Proc. 13th Intl. Congress COMADEM, eds. H.C. Pusey and R.B.K.N. Rao, Vibration Insitutue, 2000, pp. 577-586 (with R. Cowan).
  128. "A Study of Mechanical Shear Bands in Liquids at High Pressure", XIII Intrn. Cong. Rheology, Vol 3, pp. 191-193, 2000 (with S. Bair).
  129. "Online Delivery of the MSME Program from Georgia Tech", International Journal of Engineering Education, Volume 17 Number 2, 2001, p. 131-137 (with W. Wepfer, J. DiGregorio, G. Wright and J. Boland).
  130. "The Measurement of Viscosity of Liquids Under Tension", Transactions of ASME, Journal of Tribology, vol 125, pp. 260-266, 2003 (with P. A. Kottke and S. Bair).
  131. "Cavitation in Creeping Shear Flows", AIChE Journal, Vol. 58, No. 8, pp. 2150-2170, 2005 (with P. A. Kottke and S. Bair).
  132. "A Quantitative Test of the Einstein-Debye Relation for Low Molecular Weight Liquids using the Shear Dependence of Viscosity", Trib. Letters, Vol.26, No.3, 2007, pp.223-228, (with S. Bair)

Books

  1. An Analytical and Experimental Investigation in Similar Solutions of Three-dimensional Laminar Incompressible Boundary Layers, Ph.D. Dissertation, University of Michigan, University Microfilm, Ann Arbor, Michigan (1961).
  2. Silicone Films - Their Action as Boundary Lubricants, Ph.D. Dissertation, University of Cambridge, Cambridge, England (June 1963).
  3. "Lubrication in High Pressure Metal Working Processes", Chapter in High Pressure Metal Working, published by Pennsylvania State University, PENNTAP Program (1968).
  4. Proceedings of Tribology Workshop, The Industrial Technology Program, Mechanics Section, Engineering Division, The National Science Foundation (April 1974) (677 pp) (edited with H. S. Cheng and F. F. Ling).
  5. Concentrated Contact Lubrication, Short Course Notes (1978) (275 pp) (with H. S. Cheng).
  6. Wear Control Handbook, ASME (1980) (co-editor with M. B. Peterson) (1358 pp).
  7. "Film Thickness, Contact Stress and Surface Temperatures," Chapter in Wear Control Handbook (1980) (edited by M. B. Peterson and W. O. Winer) (with H. S. Cheng).
  8. Technical Editor, Transactions ASME, Journal of Lubrication Technology (June 1980-June 1983), Journal of Tribology (January 1984).
  9. "Lubricants," a chapter (60 pp) in Tribological Technology, A NATO Advanced Studies Institute (September 1981).
  10. "Lubrication," a chapter (67 pp) in Tribological Technology, A NATO Advanced Studies Institute (September 1981).
  11. Research Needs in Mechanical Systems: Report of the Select Panel on Research Goals and Priorities in Mechanical Systems (prepared for NSF Mechanical Engineering and Applied Mechanics Division of NSF), ASME Special Publication (1983) (with K. N. Reid, H. H. Richardson, M. J. Rabins, R. Cohen, J. A. Callahan, R. E. Garrett and D. T. Koenig).
  12. Research Needs in Thermal Systems: Report of the Select Panel on Research Goals and Priorities in Thermal Systems (prepared for the National Science Foundation), ASME Special Publication 1986 (with A. E. Bergles, C. J. Cremers, R. H. Sabersky, W. A. Sirignano and J. W. Westwater).
  13. New Materials Approaches to Tribology: Theory and Applications, MRS (1988) (co-editor with Larry E. Pope and Larry L. Fehrenbacher) (524 pp).
  14. Proceedings of the U.S./Taiwan Joint Symposium on Tribology, National Taiwan University, Taipei, Nov. 5-8, 1989, (co-editor with S.-S. Lu) (283 pp).
  15. Development of a Theory of the Wear of Ceramics, final research report sponsored by the U.S. Department of Energy, Tribology Program, under contract DE-AC05-840R21400 with Martin Marietta Energy Systems, Inc., 1993 (with R. S. Cowan) (100 pp).
  16. ONR/GT Proceedings of Workshop on Condition-Based Monitoring Systems, 1994 (Edited by Ward O. Winer and R. S. Cowan).
  17. "Research Developments in Integrated Diagnostics and Prognostics" in Structural Health Monitoring 2000, ed. F-K Chang, Technomic Publishing, 1999, pp.237-246 (with R. S. Cowan).
  18. "Technologies for Machinery Diagnosis and Prognosis", Modern Handbook of Tribology, ed. B. Bhushan, CRC Press, 2000 (with R. S. Cowan).
  19. "Condition Monitoring Tools for Tribologists," Proceedings NATO-ASI Conference on the Fundamentals of and Bridging the Gap bewteen Nano and Micro/Macroscale Tribology, ed. B. Bushan, Kluhwer Press, 2000 (with R. S. Cowan).
  20. "Machinery Diagnostics", Chapter 22 in Tribologie-Handbuch, Vieweg+Teubner Verlag, 2010. pp 757, Horst Czichos and Karl-Heinz Habig (with R. S. Cowan)

Presentations

  1. "Fundamentals of Boundary Lubrication," ASLE Annual Meeting (1964).
  2. "Rheological Properties of Lubricants," General Motors Research Laboratories (1964).
  3. "Silicones as Lubricants," Whirlpool Corporation, Sigma Xi Seminars (1964).
  4. "High Pressure Rheology of Lubricants," Ford Motor Company Research Laboratory (1965).
  5. "Fundamentals of Boundary Lubrication," ASLE Montreal, Quebec Section (April 1965).
  6. "Fundamentals of Boundary Lubrication," ASLE Detroit Section (April 1965).
  7. "High Pressure Lubricant Rheology," Dow Chemical Research Seminars (1966).
  8. "Combined Effects of High Pressure and Shear Stress on the Rheology of Lubricants," Gordon Research Conference on Friction, Lubrication and Wear (June 1966).
  9. "High Pressure Lubricant Rheology," American Oil Company, Research Seminar, Whiting, IN (1967).
  10. "Lubrication Research in the University," ASLE Detroit Section (1967).
  11. "High Pressure Lubricant Rheology," The University of Michigan Research Club Seminar (1969).
  12. "Rheology of Thin Films of Lubricants," Dow Chemical Company, Surface Chemistry Seminar (1969).
  13. "Lubricant Rheological Effects in Severely Loaded Contacts," Conference on the Limits of Lubrication, Imperial College, London, England (1969).
  14. "Recent Developments in Research on Lubricant Rheology," Sun Oil Company Research Seminar Series (December 1969).
  15. "Lubricant Rheology and Elastohydrodynamic Lubrication," Union Carbide Research Seminar (January 1970).
  16. "Engineer's Role in the Impact of Science and Technology," Georgia Academy of Sciences (April 1970).
  17. "Lubricant Rheology in Elastohydrodynamic Lubrication," Chevron Research Corporation, Research Seminars (April 1970).
  18. "Lubrication in High Pressure Metalworking," ASLE Detroit Section (May 1970).
  19. "Elastohydrodynamic Lubrication and Fluid Rheology Interactions," Phillips Petroleum Corporation Research Seminars (May 1970) (two lectures).
  20. "Viscoelastic Effects in Squeeze-Film Lubrication," Gordon Research Conference on Friction, Lubrication and Wear (August 12, 1970).
  21. "Review of Lubricant Rheology Developments," Sun Oil Research Seminar (November 1970).
  22. "Recent Advances in Lubricant Rheology in Elastohydrodynamic Lubrication," ASLE, F. P. Bowden Memorial Lectures (May 1971).
  23. "Recent Developments in Elastohydrodynamic Lubrication, "Solid and Fluid Mechanics Seminars, Georgia Tech (January 1973).
  24. "Temperatures in EHD Contacts," Conference on the Limits of Lubrication, Imperial College, London, England (July 1973).
  25. "Infrared Temperature Measurements in Elastohydrodynamic Contacts," OECD-International Research Group, London, England (July 1973).
  26. "Some Experience with Transition to Turbulence in a Large Journal Bearing," Tribology Conference, Chalmers University of Technology, Boneby, Sweden (August 1973).
  27. "Lubricant Degradation in Elastohydrodynamic Lubrication," Tribology Conference, Chalmers University of Technology, Boneby, Sweden (August 1973).
  28. "Infrared Temperature Measurements in Elastohydrodynamic Films," Tribology Conference, Chalmers University of Technology, Boneby, Sweden (August 1973).
  29. "Recent Developments in Lubricant Rheology in EHD Lubrication," Institut National des Sciences Appliquees de Lyon, Laboratoire de Mechanique des Contacts, Lyon, France (August 1973).
  30. "Rheology of Lubricant Films in Concentrated Contacts," Gordon Research Conference on Friction, Lubrication and Wear, Colby, NH (June 1974).
  31. "Polymer Degraduation in Elastohydrodynamic Lubrication," C.N.R.S. International Colloque on Polymers and Lubrication, Brest, France (May 1974).
  32. "Severe Shear Phenomena in Lubrications," Phillips Petroleum Research and Development Seminars, Bartlesville, OK (August 1974).
  33. "Recent Developments in the Infrared Measurements of Temperatures in Elastohydrodynamic Lubrication," Meeting of the International Research Group on the Wear of Engineering Materials, Berlin, West Germany (October 15-18, 1974).
  34. "Basic Concepts of Elastohydrodynamic Lubrication," Advanced Seminar on Elastohydrodynamic, ASLE Annual Meeting, Cleveland, OH (May 28, 1974).
  35. "Temperature Measurements in Sliding Elastohydrodynamic Contacts - The Detection of Transition Phenomena," Rensselaer Polytechnic Institute, Applied Mechanics Seminar Series (May 1, 1975).
  36. "Basic Concepts of Elastohydrodynamic Lubrication," Advanced Seminar in Elastohydrodynamic Lubrication, ASLE Annual Meeting, Atlanta, GA (May 5, 1975).
  37. "Recent Developments in Tribology and Rheology Research at the Georgia Institute of Technology," ASME Research Committee on Lubrication, Atlanta, GA (May 9, 1975).
  38. "Some Recent Developments in Infrared Temperature Measurements in Elastohydrodynamics Contacts," OECD International Research Group on the Wear of Engineering Materials, Tokyo, Japan (June 13, 1975).
  39. "Tribology at Georgia Tech," Georgia Tech Sigma Xi Lecture (March 11, 1976).
  40. "The Wear Control Handbook Project of the Research Committee on Lubrication of American Society of Mechanical Engineers," Workshop on Wear Reduction, Congress of the United States, Office of Technology Assessment, Washington, D.C. (February 23-25, 1976).
  41. "The Role of Glass Transition in Concentrated Contacts," The Gordon Research Conference on Friction, Lubrication and Wear, New London, NH (June 14-18, 1976).
  42. "Some Recent Developments in Infrared Temperature Measurements in Elastohydrodynamic Contacts," International Research Group on the Wear of Engineering Materials, Paris, France (1976) (given by G. Solomon for W. O. Winer in absentia).
  43. "The Role of Glass Transition in Elastohydrodynamic Lubrication Traction," Imperial College, England, London, England (December 9, 1976).
  44. "Infrared Temperature Measurements in Elastohydrodynamic Contacts," Lecture in Fluid Dynamics Colloquium, Northwestern University, Evanston, IL (January 4, 1977).
  45. "Infrared Temperature Measurements in Elastohydrodynamics Contacts," University of Houston, Department of Mechanical Engineering, Houston, TX (January 14, 1977).
  46. "Traction Fluid Research Needs," ASME/ERDA/ONR/Workshop on Critical Tribological Research and Development Needs in the Development of Energy Technology, Washington, D.C. (February 7, 1977).
  47. "Role of Glass Transition in Elastohydrodynamic Lubrication," NASA/ONR/AFML Contractors Conference on Concentrated Contact Lubrication, NASA-Lewis Research Center, Cleveland, OH (March 22-24, 1977).
  48. "Aspects of Wear and Material Removal," Keynote Speaker for American Society of Lubrication Engineers (Hudson-Mohawk Section), Schenectady, NY (May 5, 1977).
  49. "Surface Roughness Effects on Lubrication," Invited lecturer at the Leeds-Lyon Tribology Symposium, Institut National des Sciences Appliquees de Lyon, Lyon, France (September 13-16, 1977).
  50. "Direct Surface Temperature Measurement by Infrared Radiation in EHD, and the Correlation with the Blok Flash Temperature Theory," Invited Lecturer at the Eurotrib 77 World Tribology Conference, Dusseldorf, West Germany (October 3-5, 1977).
  51. "A Review of Lubricant Rheology Research at Georgia Tech," NASA DOD Contract Review, Battelle, Columbus, OH (December 14, 1977).
  52. "Measurements of Limiting Shear Stress in Lubricating Materials," Texaco Inc., Beacon Research Laboratory, Beacon, NY (March 8, 1978).
  53. "A Review of Elastohydrodynamic Lubrication and Lubricant Rheological Response," RCA, David Sarnoff Laboratory, Princeton, NJ (March 9, 1978).
  54. "A Rheological Model for Elastohydrodynamic Lubrication Traction based on Primary Laboratory Data," University of Massachusetts, Amherst, MA (April 5, 1978).
  55. "Local Temperature Flashes in Starved Sliding Lubricated Contacts," OECG-IRG, Leeds University, Leeds, England (September 18-19, 1978).
  56. "Shear Strength Measurements of Lubricants at High Pressure," ASME/ASLE Lubrication Conference, Minneapolis, MN (October 1978).
  57. "A Rheological Model for Elastohydrodynamic Contacts based on Primary Laboratory Data," ASME/ASLE Lubrication Conference, Minneapolis, MN (October 1978).
  58. "Temperatures in Highly Loaded Lubricated Mechanics," Presented at the Atlanta Section of the American Society of Mechanical Engineers, Atlanta, GA (October l978).
  59. "A Rheological Model for Elastohydrodynamic Contacts based on Primary Laboratory Data," Presented Seminar at Columbia University, Department of Mechanical Engineering, New York, NY (January 24, 1979).
  60. "A Case for the Limiting Shear Stress Model for Lubricant Rheology," Gordon Research Conference, New London, NH (June 1978).
  61. "An Introduction to the Lubrication of Concentrated Contacts," Eaton Corporation, Detroit, MI (two days) (July 1978) (with H. S. Cheng).
  62. "Introduction to Elastohydrodynamic Lubrication," NLGI Annual Meeting, Hot Springs, VA (October 31, 1978).
  63. "An Introduction to the Lubrication of Concentrated Contacts Torrington Company, Torrington, CT (two days) (November 1978) (with H. S. Cheng).
  64. "Temperatures in Highly Loaded Lubricated Contacts," General Motors Research Laboratories, Warren, MI (December 6, 1978).
  65. "Research Needs in Thin Film Lubrication," NASA-Lewis Research Center, Cleveland, OH (January 19, 1979).
  66. "Rheology of Lubricants in Highly Loaded Contacts," Milliken Industries, Spartanburg, SC (March 20, 1979).
  67. "Tribology - An Overview and State-of-the-Art," Dresser Engineering and Technical Conference, Dallas, TX (November 15, 1979).
  68. "Tribological Experience with Hard Coats on Soft, Metallic Substrates," OECD International Research Group, Berlin, Germany (September 1979).
  69. "Lubricant Shear Response to Large Strain at High Pressure," Society of Rheology, Boston, MA (October 28 - November 1, 1979).
  70. "Recent Developments in Thin Film Performance of Solid Lubricants at Georgia Institute of Technology," DARPA Contract Review Symposia on Solid Lubricants Program, Dayton, OH (October 12, 1979).
  71. "Critique of Lubricant Related Automotive Fuel Economy Session," (session chaired), First International Symposium on Automotive Fuel Economy, Washington, D.C. (October 31 - November 2, 1979).
  72. "Simultaneous Temperature Mapping and Traction Measurements in EHD Contacts," Leeds/Lyons Conference, Lyon, France (September 1979).
  73. "The Role of Tribology in Automotive Fuel Economy," U.S. Department of Transportation, University Research Contractors Meeting, Cambridge, MA (June 5, 1980).
  74. "An Experimental Evaluation of the Hamrock and Dowson Minimum Film Thickness Equation for fully Flooded EHD Point Contacts," ASME/ASLE International Lubrication Conference, San Francisco, CA (August 18, 1980).
  75. "A Film Thickness Analysis for Line Contacts under Pure Rolling Conditions with a non-Newtonian Rheological Model," ASME/ASLE International Lubrication Conference, San Francisco, CA (August 18, 1980).
  76. "Tribology Education - The USA Model," ASME/ASLE International Lubrication Conference, San Francisco, CA (August 19, 1980).
  77. "The ASME Wear Control Handbook: A Project Overview," ASME/ASLE International Lubrication Conference, San Francisco, CA (August 18, 1980).
  78. "Tribology Research at Georgia Tech," ESSO Chemical Research Center, Abingdon, England (September 8, 1980).
  79. "Friction/Traction Measurements with Continuously Variable Slide-Roll Ratio and Side Slip at various Lambda Ratios," Leeds/Lyon Conference, Leeds, England (September 11, 1980).
  80. "Recent Developments in Tribology Research in the U.S.A.," Institute of Mechanical Engineering, Moscow, U.S.S.R. (September 16, 1980).
  81. "Tribology Research at Georgia Institute of Technology, U.S.A.," Sumgait Division of Petrochemical Processes Institute of the Academy of Sciences of the U.S.S.R., Sumgait, Azerbaijan-U.S.S.R. (September 19, 1980).
  82. "An Experimental Evaluation of the Hamrock and Dowson Minimum Film Thickness Equation for fully Flooded EHD Point Contacts," University of Kentucky, Mechanical Engineering Seminar Series, Lexington, KY (October 30, 1980).
  83. "A Review of the State-of-the-Art on Thermal and Rheological Phenomena in highly Loaded Tribological Contacts," NASA-Lewis Research Center, Interdisciplinary Collaboration in Tribology Meeting, Cleveland, OH (October 27, 1980).
  84. "Tribology Research at Georgia Institute of Technology," University of Virginia, Charlottesville, VA (May 27-28, 1981).
  85. "Surface Temperature Measurements in Tribotesting by Rapid Infrared Scanning," OECD International Research Group on the Wear of Engineering Materials, Paris, France (May 19-21, 1981).
  86. "Thermal Phenomena in Tribology," Technical University, Delft, The Netherlands (May 22, 1981).
  87. "Lubrication," A NATO Advanced Studies Institute Programme, Maratea, Italy (September 13-26, 1981).
  88. "Lubricants," A NATO Advanced Studies Institute Programme, Maratea, Italy (September 13-26, l981).
  89. "Coatings for Wear Reduction in Reciprocating Machinery," Leeds/Lyon Conference, Leeds, England (September 7-10, 1982).
  90. "Infrared Temperature Measurements of a Reciprocating Seal Test," Leeds/Lyon Conference, Leeds, England (September 7-10, 1982).
  91. "Survey of Research Activities in Tribology in the U.S.A.," U.S./Federal Republic of Germany (F.R.G.) Workshop on Tribology, Berlin (Western Sector) F.R.G. (September 13-17, l982).
  92. "Temperatures in Tribosystems," U.S./Federal Republic of Germany (F.R.G.) Workshop on Tribology, Berlin (Western Sector) F.R.G. (September 13-17, l982).
  93. "Surface Temperature Measurements in Three Tribotests of Unlubricated Pairs," International Group on Wear of Engineering Materials (OECD/IRG), Neuchatel, Switzerland (September 21-24, 1982).
  94. "Tribology Research Funding Recommendations for the Mechanical Systems Program of the Mechanical Engineering and Applied Mechanics Division of the National Science Foundation," NSF Mechanical Systems Workshop, Washington, D.C. (November 8-9, l982).
  95. "Tribology Research in Mechanical Engineering at Georgia Tech," Graduate Seminar, North Carolina State University, Raleigh, NC (November 5, 1982).
  96. "Temperatures in Unlubricated Sliding Contacts," Graduate Seminar, Columbia University, New York, NY (January 25, 1983).
  97. "Tribology Research at Georgia Tech," Kearmos Society, Ceramic Engineering, Georgia Tech, Atlanta, GA (February 17, l983).
  98. "Temperature Effects in Elastohydrodynamically Lubricated Contacts," NASA International Conference on Tribology in the '80s, NASA-LRC (April 20, l983).
  99. "Tribological Properties of Magnetron Sputtered TiN," 37th Meeting [MFPG] Mechanical Failures Prevention Group, National Bureau of Standards, Gaithersburg, MD (May 10-12, 1983) (with S. Ramalingam).
  100. "Friction/Traction and Wear Testing of High Temperature Solid Lubricated Systems," Hughes Design Review Meeting, Los Angeles, CA, (May 19, 1983).
  101. "Lubricant Rheology in Highly Stressed Tribocontacts," Shell Westhollow Research Center, Houston, TX, (June 29, 1983).
  102. "Thermal Phenomena in Sliding Tribocontacts," Naval Ship Research and Development Center, Annapolis, MD, (September 12, 1983).
  103. "Tribology Research in Mechanical Engineering at Georgia Tech," ASME, Atlanta Section, Atlanta GA, (October 3, l983).
  104. "High Shear Rheology and Thermal Phenomena in Tribology," IBM, Tucson, AZ (October 14, 1983).
  105. "Research Needs in Tribology for NSF Mechanical Systems Program," ASLE/ASME Lubrication Conference, Hartford, CT (October 19, 1983).
  106. "Hotspot Observations in Sliding Tribo Contacts," Open Forum, ASLE/ASME Lubrication Conference, Hartford, CT (October 20, 1983).
  107. "Thermal Phenomena in Concentrated Tribological Contacts," University of Pittsburgh, Pittsburgh, PA (November 17, 1983).
  108. "Tribology and Rheology Research at Georgia Tech," ALCOA Technical Center, Pittsburgh, PA (November 18, 1983).
  109. "On the Observation of Hotspots on Sliding Ceramic Pairs," Oak Ridge National Laboratory, Oak Ridge, TN (December 5, 1983).
  110. "The Thermal Resistance of Tapered Roller Bearings," The Timken Company, Canton, OH (December 19, 1983).
  111. "High Shear Stress Rheology," Continental Products, Augusta, GA (February 16, 1984).
  112. "On the Thermal Nature of Real Areas of Contact in Sliding Tribological Systems," Inaugural Lecture of the Bert L. Newkirk Interdisciplinary Lecture in Tribology Colloquium, Rensselaer Polytechnic Institute, Troy, NY (March 2, 1984).
  113. "Tribology Research at Georgia Tech," Georgia Tech Chapter of Sigma Xi, Atlanta, GA (March 6, 1984).
  114. "Tribological Aspects of Automation," Focus on Manufacturing Technology Conference, Georgia Institute of Technology, Atlanta, GA (March 29-30, 1984).
  115. "Tribology and Rheology Research at Georgia Tech," ASME Research Committee on Tribology, Atlanta, GA (May 1, 1984).
  116. "Do Dancing Hotspots cause Wear?", ASLE Wear Technical Committee Seminar, ASLE Annual Meeting, Chicago, IL (May 7, 1984).
  117. "SI Units in Technical Communication," ASLE Technical Communication Course, ASLE Annual Meeting (May 8, 1984).
  118. "Localized Thermal Phenomena in Tribo-Systems," Mechanical Engineering Seminar Series, University of Minnesota (May 9, 1984).
  119. "Thermal Aspects of Wear in High Temperature Sliding," Gordon Research Conference on Tribondon, NH (June 11-15, 1984).
  120. "Thermal Aspects of Wear," Thermo Mechanical Effects Workshop, Dartmouth College, Hanover, NH (June 18-20, 1984) (with T. F. J. Quinn).
  121. "The Rheology of Liquid Lubricants subjected to High Stress," Gulf Research and Development Company Seminar Series, Pittsburgh, PA (July 11, 1984).
  122. "Localized High Temperature Phenomena in Tribology," University of Texas at Austin, Mechanical Engineering Seminar, Austin, Texas (July 16, 1984).
  123. "ASME/NSF Thermal Systems Program Study," ASME/AIChE National Heat Transfer Conference, Niagara Falls, NY (August 7, 1984).
  124. "Thermal Aspects of the Wear of Ceramics," Oak Ridge National Laboratories, Oak Ridge TN (September 28, 1984).
  125. "Recent Development in Tribology at Georgia Tech," Hughes Aircraft, El Segundo, CA (October 25, 1984) [with Terry Quinn].
  126. "On the Traction and Film Thickness Behavior of Greases in Concentrated Contacts," NLGI National Meeting, Phoenix, AZ (October 1984).
  127. "ASME/NSF Thermal Systems Program Study," International Electronics Packaging Conference, Baltimore, MD (October 30, 1984).
  128. "ASME/NSF Thermal Systems Program Study," American Physical Society - Fluid Dynamics Division, Annual Meeting, Brown University, Providence, Rhode Island (November 20, 1984).
  129. "ASME/NSF Thermal Systems Program Study," NSF/MEAM Advisory Committee Meeting, Washington, D.C. (November 26, 1984).
  130. "High Temperature Phenomena in Tribocontacts of Metals and Ceramics," Joseph Wallenberg Symposium, SKF European Research Center, Nieuwegein, The Netherlands (December 5, 1984).
  131. "ASME/NSF Thermal Systems Program Study," ASME Winter Annual Meeting, New Orleans, LA (December 11, 1984).
  132. "Localized Thermal Phenomena in Tribosystems," School of Chemical Engineering, Georgia Institute of Technology, Atlanta, GA (January 7, 1985).
  133. "Effect of a Surface Film on the Surface Temperatures of a Rotating Cylinder," Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC (March 21, 1985).
  134. "Automotive Cam and Lifter Tribology," General Motors Research Laboratories, Warren, MI (January 24, 1985).
  135. "Automotive Cam and Lifter Tribology," INSA, Lyon, France (February 22, 1985).
  136. "A Review of the NSF/ASME Study on the Research Needs and Priorities in Thermal Systems," SAE 1985 Congress, Detroit, MI (February 27, 1985).
  137. "Tribology Short Course: 1. Lubricants. 2. Boundary Lubrication", SAE 1985 Congress, Detroit, MI (February 28, 1985).
  138. "Effect of a Surface Film on the Surface Temperatures of a Rotating Cylinder," North Carolina State University, Raleigh, NC (March 21, 1985).
  139. "Materials Research in Tribology," Georgia Tech Spotlight on Materials Seminar, Atlanta, GA (March 27, 1985).
  140. "The State of Tribology Research and Activity in the USA," Invited Plenary Lecture, JSLE International Tribology Conference, Tokyo, Japan (July 8-10, 1985).
  141. "Steady State Frictional Behavior of Sputtered Solid Lubricants," JSLE International Tribology Conference, Tokyo, Japan (July 8-10, 1985).
  142. "An Analysis of Lubricant Viscosity by a Free Volume Model," JSLE International Tribology Conference, Tokyo, Japan (July 8-10, 1985).
  143. "Recent Developments in Tribology and Rheology Research at Georgia Tech," Kyodo Oil Technical Research Center, Saitama, Japan (July 1985
  144. "Recent Developments in Tribology and Rheology Research at Georgia Tech," Taiwan National University, Taipei, Taiwan (July 16, 1985).
  145. "Recent Developments in Tribology and Rheology Research at Georgia Tech," National Chung Kung University, Taiwan (July 15, 1985).
  146. "Advanced Tribotesting and Evaluation Techniques," DARPA, MSD, Tribology Workshop, La Jolla, CA. (July 23-24, 1985).
  147. "Tribology Research & Education at Georgia Tech," Atlanta Section ASLE, Atlanta, GA (April 1985).
  148. "Characterization and Testing of Tribomaterials," DOE-ECUT Program Review, Atlanta, GA. (October 11, 1985).
  149. "Tribological Aspects of Automation," TRW Technology Group Manager's Meeting, Atlanta, GA (April 17, 1986).
  150. Summary Panel Member, DOE Workshop on Wear Test Standards, Chicago, IL (April 23, 24, 1985).
  151. "Recent Developments in Tribology Research at Georgia Tech," Graduate Student Colloquium, Mechanical Engineering, Northwestern University, Evanston, IL (Jan. 6, 1986).
  152. "High Temperature Solid Lubrication Fundamentals for Ceramics," Hughes Aircraft Co., El Segundo, CA (March 13, 1986).
  153. "On the Measurement of Local High Surface Temperatures in Sliding Tribocontacts," 7th NASA-NAVY Workshop on Liquid Lubricated Seals, Georgia Tech, (March 25-27, 1986).
  154. "Tribology & Rheology Research at Georgia Tech," Eastman Chemical Co., Kingsport, TN, (April 2, 1986).
  155. "Tribology & Rheology Research at Georgia Tech," Birmingham Section of ASLE, Birmingham, AL (April 14, 1986).
  156. "Research needs in Tribology for the next Decade," presented at Symposium on "Future Directions in Tribology Research," The National Science Foundation, Washington, DC, (July 21-22, 1986).
  157. "Tribology & Rheology Research at Georgia Tech," 7th Navy Working Group Meeting on Liquid Lubricated Seals, Atlanta, GA (March 25-27, 1986).
  158. "Professional Education: An Engineering Point of View," at Symposium, "Professional Education and all That Stuff," The University Center of Georgia, Athens, GA (Oct. 24, 1986).
  159. "Surface Reactions and Tribotesting," AFOSR Workshop on Fundamentals of Tribology, Dayton, OH (Feb. 10-11, 1987).
  160. "On the Possibility of Lubricous Oxides for Ti-Ceramic Pairs," Hughes/DARPA Workshop on Ceramic Tribology (March 31-April 1, 1987), Los Angeles, CA.
  161. "Lubricant Rheology and Thermal Phenomena in Tribology," Tribology Short Course, NSF Industrial Tribology Center, Northwestern University, Evanston, IL (April 3, 1987).
  162. "Tribology Research at Georgia Tech," Georgia Tech/Georgia Power Symposium, Atlanta, GA (April 16, 1987).
  163. "Rheology of Liquid Lubricants Under Extreme Pressure and Shear Stress," Mechanical Engineering Seminar, Cornell University, Ithaca, NY (April 23, 1987).
  164. "The Tribological Needs," 1987 ASLE Annual Meeting, Ceramic Tribology Symposium, Anaheim, CA (May 11-14, 1987).
  165. "Shear Rheological Characterization of Motor Oils," 1987 ASLE Annual Meeting, Anaheim, CA (May 11-14, 1987).
  166. "The Influence of Ambient Pressure on the Apparent Shear Thinning of Liquid Lubricants: An Overlooked Phenomena," Institution of Mechanical Engineers International Conference, Tribology 50 Years, London, England (July 1-3, 1987).
  167. "Thermal Phenomena in Tribology," NSF Tribology Program Grantees Workshop, Georgia Institute of Technology, Atlanta, GA (August 10-11, 1987).
  168. "Surface Thermal Behavior in Sliding Contacts," Magnetic Pheripherals, Inc. (CDC), Minneapolis, MN (September 22, 1987).
  169. "The Tribology Community," Honor's Luncheon Address 1987 ASME/STLE Tribology Conference, San Antonio, TX (October 7, 1987).
  170. "Serendipety in Career Plans," Ga Tech, Phi Kappa Phi Initiation Banquet, Atlanta, GA (December 1, 1987).
  171. "A Thermomechanical Theory of Wear," Department of Mechanical Engineering, MIT, Cambridge, MA (Dec. 16, 1987).
  172. "Tribology of Ceramic Materials," 6th International Colloquium on Industrial Lubricants - Properties, Application, and Disposal, Technische Akademie Esslingen, Federal Republic of Germany (Jan. 12-14, 1988) (with H. Hong).
  173. "Tribology of Ceramics; A Report of The National Research Council Committee on the Tribology of Ceramics," ASM Meeting, Washington, D.C. (March 1-3, 1988).
  174. "Thermomechanical Model of Wear with Application to Ceramics," The National Bureau of Standards, Gaithersburg, MD (April 13, 1988).
  175. "Thermomechanical Model of Wear with Application to Ceramics," The University of Texas, Austin, TX (April 22, 1988).
  176. "A Thermomechanical Wear Model for Ceramics," Gordon Research Conference on Tribology (June 1988) (with B.-Y. Ting).
  177. "The Near Surface Effects of Frictional Heating," Vanderbilt University, Short Course on "Near Surface Design for Rolling Contact and Wear Performance," (August 1988).
  178. "The Evaluation of Materials for Tribological Applications," Invited Lecture, Material Research Society Fall Meeting, Boston, MA (November 1988).
  179. "The Future of the Physical Characterization of Liquid Lubricants," Shell Workshop on Liquids and Lubricants, Brandshatch Place, Kent, England (April 3-7, 1989).
  180. "Future Trends in Tribology," Invited Lecture, EUROTRIB '89, Helsinki, Finland (July 1989).
  181. "Film Thickness and Frictional Behavior of Some Liquid Crystals in Point Concentrated Contacts," presented at American Chemical Society Meeting, Colloid Science Division, Miami, FL (September 14, 1989) (with S. H. Winoto and H. S. Lee).
  182. "The Rheological Behavior of Liquid Lubricants Subjected to Extremes of Pressure and Shear Stress," The Pennsylvania State University (September 26, 1989).
  183. "The Rheological Behavior of Liquid Lubricants Subjected to Extremes of Pressure and Shear Stress," Ford Motor Company, Dearborn, MI (October 26, 1989).
  184. "Lubrication and Wear Technology," EPRI Cable Pulling Workshop, New Orleans, LA (October 11-12, 1989).
  185. "Long Range Plans in the Woodruff School of Mechanical Engineering: Process and Status," Georgia Tech National Advisory Committee, Atlanta, GA (October 12, 1990).
  186. "ASME Research Programs," Talk at ASME Niagara Mohawk Section, Schenectady, NY (November 14, 1990).
  187. "Boundary Lubrication, Friction and Wear," in Fluid Sealing Technology Continuing Education Course (organized by R. Salant), Georgia Tech (November 27-30, 1990).
  188. "Thermal Mechanical Wear Modelling," presented at ASME Winter Annual Meeting, Dallas, TX (November 27, 1990) (with J.-S. Yang).
  189. "Predicting Failure Transitions by a Thermomechanical Wear Model," Ernest Rabinowicz Symposium, MIT (June 29-30, 1993) (with R. Cowan).
  190. "The Role of Tribology in a Technological World," Mechanical Engineering Department Colloquium Lecture, Purdue University, West Lafayette, IN (October 22- 23, 1992).
  191. "A Rheological Basis for Concentrated Contact Friction," proceedings, to be published, from the '93 Leeds-Lyon Conference, Lyon (France, 1993) (with S. Bair).
  192. "Thermomechanical Wear Modeling," proceedings from the '93 International Tribology Conference, Beijing, China, 1993 (with R. Cowan)
  193. "An Attempt at Determining the Real Area of Contact in Tribo-Contacts," ASME Winter Annual Meeting, New Orleans, LA (December, 1993) (with D.Y. Chung and T. Aikawa).
  194. "The Role of Tribology in Technological Development," ASME Energy Resources Conference, New Orleans (January 24, 1994).
  195. "Shear band analysis for lubricants based on a viscoelastic plasticity model," Twelfth U.S. National Congress of Applied Mechanics, University of Washington, Seattle, WA (June 27-July 1, 1994).
  196. "Combating Wear Through Surface Coating - Property Considerations," First Australian-USA Workshop on Critical Issues in High Performance Wear Resistant Films, Wollongong, Australia (February 1-3, 1995) (with Rick Cowan).
  197. "The Role of Lubricant Rheology in Contact Mechanics for Traction Drive Transmissions," GM Research (February, 10, 1998).
  198. "High Pressure Rheology of Lubricants and Limitations of the Reynolds Equation," World Tribology Congress, London, Invited Keynote Address (September 1997).
  199. "High Pressure Rheology of Lubricants and Limitations of the Reynolds Equation," University of Delaware, Mechanical Engineering Seminar Series (December 5, 1997).

Reports

  1. "Fluid Mechanics," Notes for Continuing Education Course, Ford Motor Company (1964) 200 (with A. G. Hansen).
  2. "Lubrication," Notes for Continuing Education Course, Ford Motor Company (1966) 185.
  3. "Shock Absorber Design," Notes for Continuing Education Course, Ford Motor Company (1970) 150.
  4. "Pressure-Viscosity and Elastohydrodynamic Behavior of a Series of Polybutene Fluids," American Oil Company (March 1969).
  5. "Fluid Measurements," NASA-Lewis Research Center (July 1969).
  6. "Pressure-Viscosity Measurements on Four Lubricants," Ball Bros. Research (August 1970).
  7. "Fluid Measurements," NASA-Lewis Research Center (July 1969).
  8. "Pressure-Viscosity Measurements on a Silicone Fluid," Stauffer-Wacker Chemical Company (February 1971).
  9. "Fluid Measurements," NASA-Lewis Research Center (January 1972).
  10. "Investigations of the Rheology of a Series of Silicones as related to Elastohydrodynamic Lubrication," Dow Corning Corporation (1972) (with J. Jakobsen and D. M. Sanborn).
  11. "Bearing and Seals Investigation of a No. 2 Bearing in Model MS-7000 Gas Turbine," General Electric Corporation (January 1973) (with D. M. Sanborn and S. V. Shelton).
  12. "Pressure-Viscosity Measurements on Three Fluids," Monsanto Chemical Company (March 1973).
  13. "Evaluation of Cooling Techniques for a No. 2, MS-7000 Gas Turbine Bearing," General Electric Corporation (February 1974) (with D. M. Sanborn and S. V. Shelton).
  14. "Pressure-Viscosity and Elastohydrodynamic Behavior of Four Siloxanes," Dow Corning Corporation (October 1974).
  15. "Rheological Effects in Thin Film Lubrication," National Science Foundation, NSF Grant GK-3ll54 (December 1974) (with D. M. Sanborn).
  16. "Bearings and Sales Investigation of No. 2 Bearing with Air Cooled Housing in Model MS-7000 Gas Turbine," The General Electric Company, Large Gas Turbine Division (July 1975) (with D. M. Sanborn, S. V. Shelton and S. Bair).
  17. "Investigations of Lubricant Rheology as Applied to Elastohydrodynamic Lubrication," NASA-Lewis Research Center (August 1975) (with H. S. Nagaraj, R. Kunz and D. M. Sanborn).
  18. "Collaborative Research in Tribology," NSF (May 1976) (with H. S. Cheng and F. F. Ling).
  19. "Investigations of Lubricant Rheology as applied to Elastohydrodynamic Lubrication," NASA-Lewis Research Center (September 1976) (with D. M. Sanborn, G. M. Rentzepis, S. Bair, M. A. Alsaad, R. K. Kunz and H. S. Nagaraj) NASA CR-2837.
  20. "Preliminary Results of Large Gas Turbine Wheelspace Cooling Studies," The General Electric Company, Large Gas Turbine Division (October 1976) (with S. Bair and D. M. Sanborn).
  21. "Kaman High Temperature Cable Evaluation," The General Electric Company (March 1977) (with W. Dean, S. Bair and D. M. Sanborn).
  22. "No. 2 Bearing Oil Flow Investigation," The General Electric Company (March 1977) (with S. Bair and D. M. Sanborn).
  23. "Investigations of Lubricant Rheology as applied to Elastohydrodynamic Lubrication," NASA-Lewis Research Center (October 1977).
  24. "Gas Turbine Wheelspace Cooling Study," The General Electric Company, Large Gas Turbine Division (August 1977) (with S. Bair and D. M. Sanborn).
  25. "Collaborative Research in Tribology," NSF (March 1978).
  26. "No. 3 Bearing Study Report," The General Electric Company (March 1978) (with S. Bair).
  27. "Rheological Study of Synthesized Traction Films," Monsanto (June 1978) (with S. Bair).
  28. "MS-6001A No. 2 Bearing Investigation," General Electric Company (December 1978) (with S. Bair).
  29. "Investigations of Lubricant Rheology as applied to Elastohydrodynamic Lubrication," NASA-Lewis Research Center (July 1978) (with S. Bair).
  30. "Surface Temperatures and Glassy State Investigations in Tribology, Part III," NASA-Lewis Research Center (July 1979) (with S. Bair).
  31. "Collaborative Research in Tribology," NSF (August 1979).
  32. "Reactive Sputtering of TiN and Solid Lubricants and Shear Strength Testing of Solid Lubricants," - Progress Report No. 1, Hughes Aircraft Company (January 1980) (with S. Ramalingam).
  33. "Reactive Sputtering of TiN and Solid Lubricants and Shear Strength Testing of Solid Lubricants," - Progress Report No. 2, Hughes Aircraft Company (May 1980) (with S. Ramalingam).
  34. "Surface Temperatures and Glassy State Investigations in Tribology," NASA-Lewis Research Center (July 1980) (with S. Bair).
  35. "Reactive Sputtering of TiN and Solid Lubricants and Shear Strength Testing of Solid Lubricants," Final Report, Hughes Aircraft Company Project No. 04-406163, 53 pages, (December 1980) (with S. Ramalingam).
  36. "NASA Interdisciplinary Collaboration in Tribology: Contact Surface Temperature," NASA-Lewis Research Center (January 1981).
  37. "Thermal Behavior of Stirling Engine Seals," Final Report, Mechanical Technology Incorporated (June 1981) (with M. A. Meinders).
  38. "Fundamental Studies in Tribology as related to Automotive Fuel Economy," DOT Project No. DTRS-5680-C-00015, 92 pages (June 1981) (with S. Ramalingam).
  39. "Reactive Sputtering of TiN and Solid Lubricants and Shear Strength Testing of Solid Lubricants," - Progress Report, Hughes Aircraft Company (November 15, 1981 to January 15, 1982) (with S. Ramalingam).
  40. "Reactive Sputtering of TiN and Solid Lubricants and Shear Strength Testing of Solid Lubricants," Progress Report, Hughes Aircraft Company (February 7-April 9, 1982) (with S. Ramalingam).
  41. "Preliminary Study of Temperature Measurement Techniques for Stirling Engine Reciprocating Seals," MTI Report prepared for NASA-Lewis Research Center for U.S. Department of Energy (August l981) (with D. F. Wilcock, L. Hoogenboom, and Maarten Meinders).
  42. "Surface Temperatures and Glassy State Investigations in Tribology," Final Report, NASA-Lewis Research Center (June 1982) (with S. Bair).
  43. "U.S./Federal Republic of Germany (F.R.G.) Workshop on Tribology, Berlin (Western Sector) F.R.G., (September 13-17, 1982)," Final Project Report, National Science Foundation (November 5, 1982) (with H. Czichos).
  44. "Exploratory Study in Infrared Measurement of Magnetic Tape/Head Contact Temperatures," Final Report, International Business Machines (April l983) (with R. Gulino and S. Bair).
  45. "An Application of a Free Volume Model to Lubricant Rheology 1," "Dependence of Viscosity on Temperature and Pressure," Laboratory Report, Tribology and Rheology Laboratory (July l983) (S. Yasutomi and S. Bair).
  46. "An Application of a Free Volume Model to Lubricant Rheology 2," "Variation in Viscosity of Binary Blended Lubricants," Laboratory Report, Tribology and Rheology Laboratory (July 1983) (S. Yasutomi and S. Bair).
  47. "Tapered Rolling Bearing Thermal Studies," Final Report, The Timken Company (September 1983) (with S. Bair and B. Gecim).
  48. "Development of Theory of Wear of Ceramics," Union Carbide/Oak Ridge National Laboratories, First Quarterly Progress Report (August 1983), Second Quarterly Progress Report (October 1983), Third Quarterly Progress Report (January 1984), Final Report (March 1984).
  49. "The Tribological Behavior of an Automotive Cam and Lifter System," Phases I and II, General Motors Research Laboratories, Final Report (July 1984) (revised October) (with S. Bair).
  50. "On the Traction and Film Thickness Behavior of Greases in Concentrated Contacts," H. A. Mayor, Sr. Memorial/NLGI Foundation, National Lubricating Grease Institute, Final Report (October 1984) (with F. Rastegar).
  51. "Rheology of Coating Colors," Continental Group, Bleached System Operations, Final Report (December 1984) (with S. Bair).
  52. "Investigation of Roller Follower Skidding on Automotive Camshafts," The Torrington Company, First Phase Report (January 1985) (with S. Bair).
  53. "Infrared Measurement of Tape-Surface Temperatures with a Simulated Head-Tape Interface," IBM, General Products Division, Tucson Technical Report (May 1985) (with B. Bhushan, S. Bair, R. Gulino).
  54. "Development of a Theory of Wear of Ceramics," Martin-Marietta/Oak Ridge National Laboratories, First Quarterly Progress Report (July 1 - September 30, 1984) Second Quarterly Progress Report (October 1 - December 31, 1984) Third Quarterly Progress Report (January 1 - March 31,1985) Fourth Quarterly Progress Report (April 1 - June 30, 1985), Annual Report (April 1986), Quarterly Report (April 1986), Final Report (ORNL/Sub/84-7802/1, July 1988).
  55. "Needle Bearing Investigations," A Report for the Torrington Company, Georgia Institute of Technology, June 1987 (with S. Bair).
  56. "High Temperature Solid Lubricants for Ceramics," Hughes Aircraft Company, Semi-Annual Report (Oct. 86 - April 87), Semi Annual Report (April 87 - September 87), Program Review Handouts and Progress Report (October 1987).
  57. "Integrated Diagnostics," Technical Report, No. 1, Office of Naval Research, Contract N00014-95-1-0539, Georgia Institute of Technology, 1996.
  58. "Integrated Diagnostics," Technical Report No. 2 Office of Naval Research, Contract N00014-95-1-0539, Georgia Institute of Technology, 1997.
  59. "Integrated Diagnostics," Technical Report No. 2 Office of Naval Research, Contract N00014-95-1-0539, Georgia Institute of Technology, 1998.