CEE Faculty Profile

David W. Scott

Associate Professor

Articles

  1. Work, P., Sapp, A., Scott, D., and Dodd, M., “Influence of Small Vessel Operation and Propulsion System on Loggerhead Sea Turtle Injuries,” Journal of Experimental Marine Biology and Ecology, 393, 2010, pp. 168-175.
  2. Dempsey, D., and Scott, D., “Timber Members Strengthened with Mechanically Fastened FRP Strips,” ASCE Journal of Composites for Construction, Vol. 10, No. 5, 2006, pp. 392-398.
  3. Lamanna, A., Bank, L., and Scott, D., "Flexural Strengthening of RC Beams By Mechanically Attaching FRP Strips," ASCE Journal of Composites for Construction, Vol. 8, No. 3, 2004 pp. 203-210.
  4. Hamoush, S., McGinley, M., Mlakar, P., Scott, D., and Murray, K., “Out-of-Plane Strengthening of Masonry Walls with Reinforced Composites,” ASCE Journal of Composites for Construction, Vol. 5, No. 3, 2001, pp. 139-145.
  5. Lamanna, A., Bank, L., and Scott, D., "Flexural Strengthening of RC Beams Using Fasteners and Fiber-Reinforced Polymer Strips," ACI Structural Journal, Vol. 98, No. 3, 2001, pp. 368-376.
  6. Scott, D., and Zureick, A., “Compression Creep of a Pultruded E-Glass / Vinylester Composite,” Composites Science and Technology, Vol. 58, No. 8, 1998, pp. 1361-1369.
  7. Zureick, A., and Scott, D., “Short Term Behavior and Design of Fiber-Reinforced Polymeric Slender Members Under Axial Compression,” ASCE Journal of Composites for Construction, Vol.1, No. 4, 1997, pp.140-149.
  8. Scott, D., Lai, J., and Zureick, A., “Creep Behavior of Fiber-Reinforced Polymeric Composites: A Review of the Technical Literature,” Journal of Reinforced Plastics and Composites, Vol. 14, 1995, pp. 587-617.

Proceedings

  1. Scott, D., and Bennett, E., “Influence of Creep on the Stability of Pultruded Columns at Elevated Service Temperatures,” Proceedings of the Sixth International Conference on FRP Composites in Civil Engineering – CICE 2012, Rome, Italy, June 13-15, 2012
  2. Schaefer, D. Scott, D., Molina, G., Al-Kalaani, Y., Murphy, T., Johnson, W., and Goeser, P., “Integration of Distance Learning Technology into Traditional Engineering Physical Laboratory Exercises,” Proceedings of the ASEE Southeastern Section Annual Meeting, Memphis, TN, April, 2008.
  3. Lindsey, S., and Scott, D., “Use of Hybrid Teaching Mechanisms to Improve Engineering Courses Delivered Via eLearning Platforms,” The 1st Annual Southeastern Scholarship Conference on e-Learning, Macon, GA, October 2005
  4. Lamanna, A., Bank, L., and Scott, D., "Rapid Flexural Strengthening of RC Beams Using Powder Actuated Fasteners and FRP Strips," Proceedings of the 5th International Conference on Fibre Reinforced Plastics for Reinforced Concrete Structures , Cambridge, England, 2001, pp. 389-398.
  5. McDonald, J., Emmons, P., Vaysburd, A., and Scott, D., “Development of Performance Criteria for Dimensionally Compatible Repair Materials,” Proceedings of the ACI Fourth International Conference on Repair, Rehabilitation, and Maintenance of Concrete Structures, and Innovations in Design and Construction, Seoul, Korea, 2000.
  6. Scott. D., and Mlakar, P., “Dynamic Response of Concrete Members Externally Reinforced With Carbon Fiber-Reinforced Polymeric Materials,” Proceedings of the 69th Shock and Vibration Symposium, Minneapolis, MN, 1998.
  7. Zureick, A., Yoon, S.J., and Scott, D., “Experimental Investigation on Concentrically Loaded Pultruded Columns,” Proceedings of the Second International Symposium, Textile Composites in Building Construction, Lyon, France, 1992, Part 2, pp. 207-215.
  8. Scott, D., Yoon, S.J., and Zureick, A., “Full Scale Test on Concentrically Loaded Fiber Reinforced Pultruded Columns,” Proceedings of the Materials Engineering Congress, ASCE, Atlanta, GA, 1992, pp. 572-576.
  9. Yoon, S.J., Scott, D., and Zureick, A., “An Experimental Investigation of the Behavior of Concentrically Loaded Pultruded Columns,” First International Conference on Advanced Composite Materials in Bridges and Structures, Sherbrooke, Quebec, 1992, pp. 309-317.