CEE Faculty Profile

Overview Honors and Awards Publications and Patents Presentations/Reports Printable CV

Abdul-Hamid Zureick

Professor

Articles

  1. Wang, N., C. O’Malley, B. R. Ellingwood and A.-H. Zureick (2011) “Bridge rating using system reliability assessment, Part II: Improvements to bridge rating practices” Journal of Bridge Engineering, ASCE, 16, pp.854-862.
  2. Wang, N., B. R. Ellingwood and A.-H. Zureick (2010) “Bridge rating using system reliability assessment, Part I: Assessment and verification by load testing” Journal of Bridge Engineering, ASCE, 16, pp. 863-871.
  3. Wang, N., B. R. Ellingwood, Abdul-Hamid Zureick (2010) “Reliability-based evaluation of flexural members strengthened with externally bonded fiber-reinforced polymer composites” Journal of Structural Engineering, ASCE, Vol. 136, No. 9, pp.1151-1160.
  4. Engindeniz, M. and Zureick A. (2008). “Deflection Response of Glass Fiber-Reinforced Pultruded Components in Hot Weather Climates,” ASCE Journal of Composites for Construction,
  5. Enginddeniz, M.; Kahn, L. and Zureick, A. (2007). “Performance of an RC Corner Beam Column Joint Severely Damaged under Bidirectiona Loading and Rehabilitated with FRP Composites,” ACI Special Publication: Seismic Strengthening of Concrete Buildings Using FRP Composites, In Press.
  6. Zureick, Abdul-Hamid, Bennett, Richard M., and Ellingwood, Bruce E. (2006) “Statistical Characterization of Fiber-Reinforced Polymer Composite Material Property for Structural Design, ASCE Journal of Structural Engineering, August,132 (8) pp. 1320-1327.
  7. Engindenez, Murat, Kahn, Lawrance F., and Zureick, Abdul-Hamid (2005). “Repair and Strengthening of Reinforced Concrete Beam-Column Joints: State-of-the-Art, ACI Structural Journal, Vol. 102, No. 2, March-April, 187-197.
  8. Alqam, Maha, Bennet, Richard, M., and Zureick, Abdul-Hamid (2004).” Probabilistic Design of Concentrically loaded FRP Compression Memmbers,” ASCE Journal of Structural Engineering, to appear in December.
  9. Linzell DG, Leon RT, Zureick AH (2003). “Instrumentation planning and validation for full-scale bridge testing,” EXPERIMENTAL TECHNIQUES 27 (3): 29-33 MAY-JUN 2003.
  10. Linzell DG, Zureick A, and Leon RT (2003). “Comparison of measured and predicted response of manufactured circular steel tubular members under concentric and eccentric compressive and tensile loads” ENGINEERING STRUCTURES 25 (8): 1019-1031 JUL.
  11. Golden, R. J., Johnson W. S., and Zureick, A. (2002). “Composite for Infrastructure Rehabilitation: Tensile Testing, Failure Modes, and Data Scatter,” Composite Materials: Testing and Design 14th Volume, ASTM STP 1436
  12. Alqam, Maha, Bennet, Richard, M., and Zureick, Abdul-Hamid (2002). “ Three-parameter vs. two parameter Weibull distribution for pultruded composite material properties,” Composite Structures, 58, pp 497-503.
  13. Zureick, A., and Kahn, L. F. (2001). “Fiber-Reinforced Polymer Composite Materials for Rehabilitation of Reinforced Concrete Structures,” ASM Engineered Materials Handbook: Composites, pp. 906-913.
  14. Haj-Ali R, Kilic H, Zureick, AH (2001). “Three-dimensional micromechanics-based constitutive framework for analysis of pultruded composite structures,” JOURNAL OF ENGINEERING MECHANICS-ASCE 127 (7): 653-660 JUL 2001
  15. Acosta, Felipe J. and Zureick, A. (2001). “Determinacion Experimental De Las Propiedades Mechanicas De Losas Para Puentes De Polimeros Reforzados Con Fibras,” determination of the mechanical properties of fiber-reinforced polymeric bridge decks, Revista Internacional De Desastres Naturels, Accidentes E Infrastructura Civil, Volumen 1, Numero 1, Mayo, pp. 3-20.
  16. Brown, Richard T. and Zureick, Abdul-Hamid (2001). “Lightweight composite truss section decking,” Marine Structures, 14, pp. 115-132.
  17. Zureick, A., and Steffen, R. (2000) “Behavior and Design of Concentrically Loaded Pultruded Angle Struts,” ASCE Journal of Structural Engineering, Vol. 126, No. 3, March, pp. 406-416.
  18. Zureick A, Linzell D, Leon RT, et al. (2000). “Curved steel I-girder bridges: experimental and analytical studies,” ENGINEERING STRUCTURES 22 (2): 180-190 FEB.
  19. Kim, Y. S., Kardomateas, G. A., and Zureick, A. (1999). “Buckling of Thick Orthotropic Cylindrical Shells Under Torsion, Submitted, Journal of Applied Mechanics, ASME, Vol. 66, March, pp. 41-50.
  20. Zureick A., and Naqib, R. (1999) “Horizontally Curved Steel I-Girders, State-of-the-Art: Part I-Analysis Methods,” Journal of Bridge Engineering, Vol. 4, No. 1, pp. 1-10.
  21. Zureick, A. and Shih, B. (1998). “Local Buckling of Fiber-Reinforced Polymeric Structural Members Under Linearly-Varying Edge Loading, Part I-Theoretical Formulation,” Composite Structures, Vol.41, pp. 79-86.
  22. Zureick, A. (1998). “FRP Pultruded Structural Shapes,” Progress in Structural Engineering and Materials, Vol.1, No. 2, pp. 143-149.
  23. Littles, Jerrol, W., Jr., Jacobs, Laurence J., and Zureick, Abdul-Hamid (1998) )"Single-Sided Ultrasonic Technique to Characterize Thick FRP Composites," Journal of Nondestructive Evaluation, Vol. 17, No. 4, pp. 223-230.
  24. Littles, J.W.; Jacobs, L.J. and Zureick, A. (1998). “Application of Ultrasonic Techniques for the Characterization of Pultruded Composite Structural Members,” Journal of Composites for Construction, Vol. 2, No. 3, pp. 126-131.
  25. Scott, D. and Zureick A. (1998). “Creep Behavior of Pultruded Materials,” Journal of Composite Science and Technology, Vol. 58, No. 8, pp. 1361-1369.
  26. Zureick A., Chajes RJ (1998). “Civil infrastructural applications of composite materials,” COMPOSITES SCIENCE AND TECHNOLOGY 58 (8): 1257-1258.
  27. Zureick, A. “Design of Pultruded Structural Members,” Progress in Structural Engineering and Materials, Editor: David Nethercot, (Invited Contribution), Vol.1, No.2, pp.143-149.
  28. Scott, D. and Zureick A. (1998). “Creep Behavior of Pultruded Materials,” Journal of Composite Science and Technology, Vol. 58, No. 8, pp. 1361-1369.
  29. Naqib, R.,.Zureick, A., and Will, K.M. (1996)"Practical Considerations in Two-Dimensional Shape Optimization of Elastic Continuum," Computers and Structures, Vol. 61, No. 2, pp. 351-330.
  30. Zureick, A. (1998). “FRP Pultruded Structural Shapes,” Progress in Structural Engineering and Materials, Vol.1, No. 2, pp. 143-149.
  31. Zureick A. and Scott D. (1997). “ Short-Term Behavior of Fiber-Reinforced Polymeric Slender members Under Axial Compression” ASCE Journal of Composites for Construction, November, pp. 140-149.
  32. Naqib, R.,.Zureick, A., and Will, K.M. (1996)"Practical Considerations in Two-Dimensional Shape Optimization of Elastic Continuum," Computers and Structures, Vol. 61, No. 2, pp. 351-330.
  33. Zureick, A. (1993)"Design Strength of Concentrically Loaded Single Angle Struts,"AISC Engineering Journal, First Quarter 1993, pp. 17 30.
  34. Zureick, A. H., (1989) "Spheroidal Cavity with Prescribed Asymmetric Displacements in Three-Dimensional Transverse Isotropy," ASCE Journal of Engineering Mechanics, November 1989, pp. 2427-2439.
  35. Zureick, A. H., and Choi, D. H. (1989). "The Rotation of a Rigid Spheroidal Inclusion Embedded in a Transversely Isotropic Medium," International Journal of Engineering Science, Vol. 27, No. 12, 1989, pp. 1603-1612.
  36. Zureick, A. H. (1989). "The Asymmetric Displacement of a Rigid Spheroidal Inclusion Embedded in a Transversely Isotropic Medium," Acta Mechanica, Vol. 77, April 1989, pp. 101-110.
  37. Zureick, A. H. (1989). "Spheroidal Cavity with Prescribed Asymmetric Displacements in Three-Dimensional Transverse Isotropy," ASCE Journal of Engineering Mechanics, November 1989, pp. 2427-2439.
  38. Zureick, A. H., and Eubanks, R. A. (1988). "Spheroidal Cavity with Prescribed Asymmetric Tractions in Three-Dimensional Transverse Isotropy," ASCE Journal of Engineering Mechanics, January 1988, pp. 24-48.

Books

  1. Zureick, Abdul-Hamid and Nettle, Alan T. (2002). “Composite Materials: Testing, Design, and Acceptance Criteria,” ASTM International, STP 1476.
  2. Zureick, A. and Kahn, L. F. (2001). Editors of “Rehabilitation of Reinforced Concrete Structures Using Fiber-Reinforced Polymer Composites,” ASM Handbook, Volume 21, Composites, pp.906-913.
  3. Zureick, A. (1997). “Stability of Horizontally Curved Steel Bridges,” Chapter 9, Guide to Stability Design Criteria For Metal Structures, Fifth Edition, Editor: T. V. Galambos, 1997, 23 pages.
  4. Zureick, A., and Gates T. (1996). Editors of “High Temperature and Environmental Effects on Polymeric Composites, 2, ASTM STP 1302, 1996.

Proceedings

  1. Wang, N., Ellingwood, B.R. and Zureick, A. (2011). “Reliability-based framework for achieving realistic and time-dependent highway bridge capacity ratings.” ICASP 11 August, 2011.
  2. Zureick, Abdul-Hamid (2008). “Short-term structural design of single angle pultruded members under compression”
  3. Engindeniz, M.; Kahn, L.; and Zureick, A. (2007). “Bidirectional Loading of Pre-1970 Corner Beam-Column Joints Before and after Rehabilitation with CFRP Composites,” Proceedings of the 6th Turkish national Conference on Earthquake Engineering, Istanbul, Turkey, October, Volume 1, pp. 551-562.
  4. Zureick, A. and Ellingwood, B. R. (2007). “Qualification, Acceptance, and Design Criteria for Externally Bonded FRP Reinforcement for Concrete Structures” FRPRCS8, Patras, Greece, Editor: T. Triantafillou, pp.
  5. Zureick, Abdul-Hamid (2005). “Proposed Short-term design strength equations for pultruded single angle compression members,” Composites for Construction Conference, CCC2005, July 12, Lyon, France, Editor: P. Hamlin, pp.
  6. Aboutaha, R., Leon, R., and Zureick, A. (1997). “Rehabilitation of a damaged AASHTO Type II Prestressed Girder Using CFRP,” Second Symposium on Practical Solutions for Bridge Strengthening and Rehabilitation, Kansas City, Missouri, March 24-25.
  7. Jacobs, L.J, Littles, J. and Zureick, A. (1997). “Characterization of Structural Composites for Highway Applications,” 23rd Annual Review in Progress in Quantitative Nondestructive Evaluation, Brunswick, Maine, July 29-August 3, 1996, Vol. 16B, pp. 1807-1814.
  8. Burrell, J. D., Zureick, A. and Grubb, M. A. (1997). “FHWA Curved Steel-Girder Project: Analysis of Curved steel I-Girder Test Frame,” ASCE Structures Congress
  9. Zureick, A., Leon, R. T., Burrell, J. and Linzell, D. (1997). “Curved Steel Bridges: Experimental and Analytical Studies,” Proceedings, Innovations in Structural Design: Strength, Stability, Reliability, A Symposium Honoring Theodore V. Galambos, Editors: J. Hajjar and R. Leon, June 6-7, pp.179-190.
  10. Zureick A. (1997). “Test Methods and Design Data for Long-Term Behavior of Civil Engineering Polymeric Composite Materials,” US-Canada-Europe Workshop on Bridge Engineering, July 11-15, 1997, Dubendorf, Switzerland.
  11. Srinivasan, Sridharan; Zureick, Abdul-Hamid, and Muzzy, John D. (1997). “Effect of Hot-Wet Environments on E-Glass/Vinylester Composites,” Volume 2, ANTEC 98 Proceedings, Atlanta, April 26-28, pp. 2255-2261.
  12. Martin, Jeff and Zureick, A. (1997). “Unique Pultruded Composites for construction/Infrastructure Applications, 10th Technical Conference on Composites in Corrosion and Construction, September 23, 1997, Las Vegas, NV.
  13. Littles, J., Jacobs, L. and Zureick, A. (1996). “Ultrasonic Characterization of FRP Composites for Bridge Applications,” ASCE 11th Engineering Mechanics Conference, Fort Laderdale, Florida, Vol. 2, pp. 959-962, May 19-22, 1996.
  14. Grubb, M. A., Yadloosky, J, Zureick, A. Leon, R. T., Burrell, J., Hall, D. H. (1996). “FHWA Curved steel Bridge Research project,” Proceedings of the Fourth National Workshop on Bridge Research in Progress, Buffalo, New York, June 17-19, 1996, pp. 183-188.
  15. Littles, J.W.; Jacobs, L.J. and Zureick, A.H. (1995). “Nondestructive Characterization of FRP Composites with Applications for Highway Structures,” the 21st Annual Review of Progress in Quantitative Nondestructive Evaluation, Snowmass, Colorado, July 31-August 5, 1994, Vol. 14A, pp. 2209-2214.
  16. Littles, J.W.; Jacobs, L.J. and Zureick, A.H. (1995). “Development of Nondestructive Evaluation Techniques for the Characterization of FRP Components,” Proceedings of Structures Congress XIII, Editor: Masoud Sanayei, Vol. 1, pp. 696-699.
  17. Duwadi, S.R.; Hall, D.H.; Yadlosky, J.M.; Yoo, C.H. and Zureick, A.H. (1995). “FHWA-CSBRP I-Girder Component Testing,” ASCE Structures Congress 1995, Boston, Massachusetts, April 3-5, pp 1695-1699, 1995.
  18. Zureick, A., Kahn, L.F., and Bandy, B. (1994). "Tests on Deep I-Shape Pultruded Beams," Forty-ninth Annual Conference, Composites Institute, Journal of Reinforced Plastics and Composites, Cincinnati, Ohio, February 7 - 9, pp. 8C/1 - 6.
  19. Zureick, A. and Kahn, L.F. (1994). "Tests on I-Shape Pultruded Beams," ASCE, Structures Congress, Vol. 2, pp. 1572-1577, April 24-28, 1994, Atlanta, Georgia.
  20. Wang, Y., Cho, B., and Zureick, A. (1993). “Fiber Reinforced Concrete Using Recycled Carpet Industrial Waste and its Potential Use in Highway Construction,” Symposium Proceedings on Recovery and Effective Reuse of Discarded Materials and By-Products for Construction of Highway Facilities, Denver,Colorado, October, 1993, pp. 4.111 - 4.11.
  21. Zureick, A. (1992). “ Research on the Behavior and Design of Pultruded Structural Members, Proceedings of the 1992 NSF Structures, Geomechanics and Building Systems Grantees’s Conference, June 10-12, 1992, San Juan, Puerto Rico, pp.179 - 181.
  22. Zureick, A., Yoon. S., and Scott, D. (1992). “Experimental Investigation on Concentrically Loaded Pultruded Columns,” Proceedings of the Second International Symposium, Textile Composites in Building Construction, Editors: P. Hamlin and G. Verchery, Lyon, France, June 23-25, 1992, Part 2, pp. 207 215.
  23. Zureick, A. (1992). " Research on the Behavior and Design of Pultruded Structural Members, Proceedings of the 1992 NSF Structures, Geomechanics and Building Systems Grantees’ Conference, June 10 - 12, San Juan, Puerto Rico, pp. 179 - 181.
  24. Scott, D., Yoon, S.J., and Zureick, A. (1992). “Full scale Test on Concentrically Loaded Fiber Reinforced Pultruded Columns” Proceedings of the Materials Engineering Congress, ASCE, Editor: Thomas D. White, August 10 12, Atlanta, Georgia, pp. 572 - 576.
  25. Yoon, S., Scott, D. and Zureick, A. (1992). “An Experimental Investigation of the Behavior of Concentrically Loaded Pultruded Columns,” First International Conference on Advanced Composite Materials in Bridges and Structures, Editors: K. W. Neale and P. Labossière, October 7-9, 1992, Sherbrooke, Quebec, pp.309 - 317.
  26. Vakiener, A., Zureick, A., and Will, K. M. (1991).“Prediction of Local Flange Buckling in Pultruded Columns”, will be presented at the ASCE Conference on Composites Structures for Civil Engineering Structures, Las Vegas, 1991, pp. 302 312.
  27. Baker, N., Zureick, A., and Anand, S. (1991). ”Knowledge-Based Structural Design-An Implementation Using AISC-LRFD,” Proceedings of the 7th Conference on Computing in Civil Engineering, Washington, D.C., May 1991, Editors L. F. Cohn and W. Rasdorf, pp. 620-629.

Patents

Fiber-Reinforced Polymeric Deck System, United States Patent & Trademark Office, U.S. Serial No. 60/261,951, January 2001, Pending.