Georgia Institute of TechnologySchool of Civil & Environmental Engineering Mason BuildingCampanile at sunsetAutumn colors on campus

SEMM Publications

Since 2004, the Program in Structural Engineering, Mechanics & Materials has published 7 Selected Publications:Books, 204 Journals, 127 Proceedings - Full paper review, 14 Reports, 

Below is a listing of these publications by publication type, year (descending) and primary author.

Books

  1. Griffis, L. and White, D.W. (2006). Stability Design of Steel Buildings, AISC Design Guide (to appear).
  2. Kaehler, R., White, D.W. and Kim, Y.D. (2006), Design of Tapered-Web Members, AISC/MBMA Design Guide (to appear).
  3. R.T. Leon and Jorg Lange (eds.), 2006. Composite Construction in Steel and Concrete V, ASCE, New York, 765 pp.
  4. Wang, Y., Lynch, J.P. and Law, K.H. (2006). "Wireless sensing, actuation and control -- with applications to civil structures," Intelligent Computing in Engineering and Architecture (Ed. Smith, I.F.C.), Springer, Berlin, Germany.
  5. White, D.W. (2006). Structural Behavior of Steel, Chapter 6, Steel Bridge Design Handbook, National Steel Bridge Alliance, 238 pp.
  6. Emkin, L. Z., Will, K. M., Stringer, S. V., Swanger, M. H., Kahn, L. F., Zand H., and Abernathy, R., GTSTRUDL Users Manual, Volumes 1-8, Published by CASE Center, Georgia Tech, Revisions A-Q, latest revision December 2004.
  7. Muhanna, R. L. and Mullen, R. L., Interval Methods for Reliable Computing, Chapter in Reliability Design Handbook, CRC Press LLC, ISBN 0-8493-1180-2, edited by Efsratios Nikolaidis and Dan Ghiocel, to be published February 2004

Journals

  1. El-Hajjar, R. F. and Haj-Ali, R. M., Mode-I Fracture Toughness Testing of Thick Section FRP Composites using the ESE(T) Specimen, Engineering Fracture Mechanics.
  2. Engindeniz, Murat; Kahn, Lawrence; and Zureick, Abdul-Hamid; Strengthening of RC Beam-Column Joints: State-of-the-Art, Part 1, submitted to ACI Structural Journal, April 2003
  3. Engindeniz, Murat; Kahn, Lawrence; and Zureick, Abdul-Hamid; Strengthening of RC Beam-Column Joints: State-of-the-Art, Part 2, submitted to ACI Structural Journal, April 2003
  4. Lopez, Mauricio, and Kahn, Lawrence; Prestress Losses in High Performance Lightweight Concrete Pretensioned Bridge Girders submitted to PCI JOURNAL, Jan. 2004
  5. Modares-Zadeh, M., Mullen, R., L. and Muhanna, R. L. "Uncertainty Analysis of the Dynamics of Structures Using the Interval Finite Element Method, "Journal of Engineering Mechanics, ASCE, 2003 (in review)
  6. Muhanna, R. L. and Mullen, R. L., " Fundamental Concepts for Interval-based Finite Element Formulations, "Journal of Reliable Computing, Kluwer Academic Publishers, 2003, (tentatively accepted)
  7. Muhanna, R. L., Mullen, R. L., and Zhang, H., " Penalty-Based Solution for the Interval Finite Element Methods, " Journal of Engineering Mechanics, ASCE, 2003 (in review)
  8. Muhanna, R. L., Mullen, R. L., and Zhang, H.," Combined Axial and Bending Stiffness in Interval Finite Element Methods, " Journal of Structural Engineering, ASCE, 2003 (in review)
  9. Pereira, S., Mello, U., Nelson, M., and Muhanna R., L. "Uncertainty in Thermal Basin Modeling: An Interval Finite Element Approach, " Journal of Mathematical Geology, 2003 (in review)
  10. Shams, Mohamed, and Kahn, L.F.; Creep and Shrinkage of High Performance Concrete Loaded at an Early Age, submitted to ACI Materials Journal
  11. Thaesler, Patricia; Kahn, Lawrence F.; Oberle, Rita; and Demers, Cornelia E.; Durable Repairs on Marine Bridge Piles, submitted to ASCE Journal of Performance of Constructed Facilities, Manuscript number: CF/2002/022045, December 2002, accepted for publication.
  12. A. Yavari and J. E. Marsden, Energy balance invariance for interacting particle systems, Journal of Applied Mathematics and Physics (ZAMP), to appear.
  13. A. Yavari, On geometric discretization of elasticity, Journal of Mathematical Physics 49, 022901, pp.1-36, 2008.
  14. A. Yavari and A. Ozakin, Covariance in linearized elasticity, Journal of Applied Mathematics and Physics (ZAMP), DOI 10.1007/s00033-007-7127-2, 2008.
  15. Adachi, T. and B. R. Ellingwood (2008), “Serviceability of earthquake-damaged water systems: Effects of electrical power availability and power backup systems on system vulnerability,” Reliability Engrg. and System Safety 93(1):78-88.
  16. Andrawes, B. and DesRoches, R. (2008). “Sensitivity of Seismic Applications to Different Shape Memory Alloy Models,” ASCE Journal of Engineering Mechanics, Vol. 134, No. 2, February, 2008
  17. Auricchio, F., Fugazza, D., and DesRoches, R. (2008) “Rate-dependent Thermo-mechanical Modelling of Superelastic Shape Memory Alloys for Seismic Applications,” Journal of Intelligent Material Systems and Structures, Vol 19, No. 1, pp. 47-61, January, 2008.
  18. Haj-Ali, R., Kilic, M., and Muliana, A.H., Nested Nonlinear Micromechanical and Structural Models for the Analysis of Thick-Section Composite Materials and Structures, Composites Science and Technology, In press.
  19. M.P. Wnuk and A. Yavari, Discrete fractal fracture mechanics, Engineering Fracture Mechanics 75(5), 2008, pp. 1127-1142.
  20. Padgett, J. E., DesRoches, R., Nielson, B. G., Yashinsky, M. Kwon, O.S., Burdette, N., and Tavera, E. (2008). “Bridge Damage and Repairs from Hurricane Katrina,” ASCE Journal of Bridge Engineering, Vol. 13, No. 1, January, 2008
  21. A. Yavari, M. Ortiz, and K. Bhattacharya, A theory of anharmonic lattice statics for analysis of defective crystals, Journal of Elasticity 86, 2007, pp. 41 - 83.
  22. A. Yavari, M. Ortiz, and K. Bhattacharya, Anharmonic lattice statics analysis of 180^o and 90^o ferroelectric domain walls in PbTiO3, Philosophical Magazine 87(26), 2007, pp. 3997-4026.
  23. Andrawes, B. and DesRoches, R. (2007). “Effect of Hysterestic Properties of Shape Memory Alloys on the Seismic Performance of Structures,” Structural Control and Health Monitoring Journal, Vol 14, pp. 301-320, Jan 2007.
  24. Atkin, A.E., B.R. Ellingwood and B. Kehoe (2007), “Performance-based engineering of constructed facilities,” J. Struct. Engrg. ASCE 133(3): 311-323.
  25. Bermes, C., Kim, J.Y., Qu, J., and Jacobs, L.J., Experimental characterization of material nonlinearity using Lamb waves, Applied Physics Letters, Vol. 90 (2), 021901, 2007.
  26. Doyoyo, M., Faure N., "Pressure vessels with reinforcing space-filling skeletons", Journal of Pressure Vessel Technology, in press.
  27. E. Kanso, M. Arroyo, Y. Tong, A. Yavari, J. E. Marsden, and M. Desbrun, On the geometric character of stress in continuum mechanics, Journal of Applied Mathematics and Physics (ZAMP), 58(5), 2007, pp. 843-856.
  28. Ellingwood, B. R. (2007), “Strategies for mitigating risk to buildings from abnormal load events,” Int. J. of Risk Assessment and Mgt. 7(6/7):828-845.
  29. Faure, N., Doyoyo, M., "Thermomechanical properties of strut lattices", Journal of the Mechanics and Physics of Solids, 55, 4, 803–818, 2007
  30. Favre, B., Doyoyo, M., and DesRoches, R. (2007). Folding Front Kinematics of Crushable Metallic Honeycombs, Proceedings of the Royal Society of London, January, 2007.
  31. Haj-Ali, R. M., Kim, H-K, Nonlinear constitutive models for FRP composites using artificial neural networks, Mechanics of Materials (MoM) Journal, Submitted, 2007.
  32. Haj-Ali, R.M., Dasi, L. P., Kim, H-S, Choi, J., Leo, H.W., and Yoganathan, A.P., Structural Simulations of Prosthetic Tri-leaflet Aortic Heart Valves, Journal of Biomechanics, Submitted, 2007.
  33. Kinali, K. and B. R. Ellingwood (2007). “Seismic fragility assessment of steel frames for consequence-based engineering: A case study for Memphis, TN.” Engrg. Struct. 29(6):1115-1127
  34. Li, Q. and B. Ellingwood (2007), “Performance evaluation and damage assessment of steel frame buildings under main shock-aftershock sequences” Earthquake Engrg. and Struct. Dyn. 36:405-427.
  35. Li, Y. and B. R. Ellingwood (2007), "Reliability of woodframe residential construction subjected to earthquakes," Structural. Safety 29(4):294-307.
  36. Loh, C.-H., Lynch, J.P., Lu, K.-C., Wang, Y. and Lin, P.-Y. (2007). "Model identification of a cable-stay bridge using wireless output-only monitoring systems," Engineering Structures: in press.
  37. Loh, C.-H., Lynch, J.P., Lu, K.-C., Wang, Y., Chang, C.-M., Lin, P.-Y. and Yeh, T.-H. (2007). "Experimental verification of wireless sensing and control system for structural control using MR dampers," Earthquake Engineering and Structural Dynamics, 36(10): 1303-1328.
  38. Lynch, J.P., Wang, Y., Swartz, R.A., Lu, K.-C. and Loh, C.-H. (2007). "Implementation of a closed-loop structural control system using wireless sensor networks," Structural Control and Health Monitoring: in press.
  39. M. Lopez, L.F. Kahn, and K.E. Kurtis, Effect of Internally Stored Water on Creep of High Performance Concrete, submitted to ACI J. Materials, February 2007.
  40. Nielson, B. and DesRoches, R. (2007). “Seismic Performance Assessment of Simply Supported and Continuous Multi-Span Concrete Girder Highway Bridges,” ASCE Journal of Bridge Engineering, Vol 12, No. 5, pp. 1-10, September, 2007.
  41. Padgett, J. E., and DesRoches, R. (2007). “Bridge Functionality Relationships for Improved Seismic Risk Assessment of Transportation Networks,” Earthquake Spectra, Vol 23, No. 1, pp. 115-130, February, 2007.
  42. Punurai, W., Jarzynski, J., Qu, Jianmin, Kim, J.-Y., Jacobs, L.J., and Kurtis, K.E., Characterization of multi-scale porosity in cement paste by advanced ultrasonic techniques, Cement and ConcreteResearch, Vol. 37, pp. 38-46, 2007.
  43. W. Punurai, J. Jarzynski, J. Qu,.J.-Y. Kim, J. Jacobs, and K.E. Kurtis, Characterization of Multi-Scale Porosity in Cement Paste by Advanced Ultrasonic Techniques, Cement and Concrete Research, January 2007, V37:38-46.
  44. Wang, Y., Lynch, J.P. and Law, K.H. (2007). "A wireless structural health monitoring system with multithreaded sensing devices: design and validation," Structure and Infrastructure Engineering, 3(2): 103-120.
  45. Wang, Y., Swartz, R.A., Lynch, J.P., Law, K.H., Lu, K.-C. and Loh, C.-H. (2007). "Decentralized civil structural control using real-time wireless sensing and embedded computing," Smart Structures and Systems, 3(3): 321-340.
  46. Yang, W., Leon, R. T. and DesRoches, R. (In Preparation). Pushover Test and Analysis of a Braced Zipper Frame, Earthquake Engineering and Structural Dynamics, January, 2007.
  47. Yang, W., Leon, R. T. and DesRoches, R. (In Press). Design and Behavior of Zipper-Braced Frames, ASCE Journal of Structural Engineering, January, 2007.
  48. Z.P. Bazant and A. Yavari, Response to A. Carpinteri, B. Chiaia, P. Cornetti and S. Puzzi's Comments on "Is The Cause of Size Effect on Structural Strength Fractal or energetic-Statistical?", Engineering Fracture Mechanics 74, 2007, pp. 2897-2910.
  49. A. Yavari, Effect of oxygen vacancies on the atomic structure of 180o ferroelectric domain walls in PbTiO3, submitted.
  50. A. Yavari, J.E. Marsden, and M. Ortiz, On spatial and material covariant balance laws in elasticity, Journal of Mathematical Physics, 47, 2006, 042903; pp. 1-53.
  51. Ahn, Q. V. and Leon, R.T., 2006. Vibration Analysis of Steel Frames with Semi-Rigid Connections on an Elastic Foundation, submitted to International Journal of Steel and Composite Structures
  52. Andrawes, B. and DesRoches, R. (2006). Comparison Between Shape Memory Alloy Restrainers and and Other Bridge Retrofit Devices, ASCE Journal of Bridge Engineering, July, 2006.
  53. Auricchio, F., Fugazza, D., and DesRoches, R. (2006) “Numerical and Experimental Evaluation of the Damping Properties of Shape Memory Alloys,” Journal of Engineering Materials and Technology, Vol. 128, No. 3, pp. 312-319, July, 2006.
  54. B.J. Mohr, H. Nanko, and K.E. Kurtis, Aligned Kraft Pulp Fiber Sheets for Reinforcing Mortar, Cement and Concrete Composites, February 2006, V.28(2): 161-172.
  55. B.J. Mohr, J.J. Biernacki, and K.E. Kurtis, Microstructural and Microchemical Changes in Pulp Fiber Cement Composites During Wet/Dry Cycling, Cement and Concrete Research, in press.
  56. B.J. Mohr, J.J. Biernacki, and K.E. Kurtis, Microstructural and Microchemical Changes in Pulp Fiber Cement Composites During Wet/Dry Cycling, Cement and Concrete Research, V.36( 7):1240-1251, July 2006.
  57. Doyoyo M., Mohr, D. "Experimental determination of the mechanical effects of mass density gradients in metallic foams under large multiaxial inelastic deformation", Mechanics of Materials, 38, 4, 325-339, 2006. "Among the ScienceDirect Top25 Hottest Articles"
  58. Ellingwood, Bruce R. (2006), “Mitigating risk from abnormal loads and progressive collapse,” J. Perf. of Constructed Facilities, ASCE 20(11):315-323.
  59. Eroz, M., White, D., and DesRoches, R. (2006). Direct Analysis of Frames with Partially Restrained Column Base Connections and Nonprismatic Members, ASCE Journal of Structural Engineering, November, 2006.
  60. F. Lagier and K.E. Kurtis, Influence of Portland Cement Composition on Early Age Reactions with Metakaolin, submitted to Cement and Concrete Research, November 2006 (in revision).
  61. Faure, N., Doyoyo, M., "Thermomechanical properties of strut lattices", Journal of the Mechanics and Physics of Solids, 55, 4, 803–818, 2007
  62. Fugazza, D., and Auricchio, F., and DesRoches, R. (2006), Numerical and Experimental Evaluation of the Damping Properties of Shape Memory Alloys, Journal of Engineering Materials and Technology, Vol. 128, No. 3, pp. 312-319, July, 2006.
  63. Fugazza, D., DesRoches, R., and Auricchio, D. (2006). Earthquake Performance of Steel Frames with Nitinol Braces, Journal of Earthquake Engineering, Vol 10, 1, pp. 45-66, 2006.
  64. Haj-Ali, R. and Muliana, A. H., A Multi-Scale Nonlinear Framework for the Long-Term Behavior of Layered Composite Structures, ASCE, Journal Engineering Mechanics, Vol. 132, Issue 12, pp. 1354-1362, 2006.
  65. Haj-Ali, R., El-Hajjar, R. F., and Muliana, A. H., Cohesive fracture modeling of crack growth in thick-section composites, Engineering Fracture Mechanics. Vol. 73, No. 15, pp. 2192-2209, 2006.
  66. Herrmann, J., Kim, J.Y., Jacobs, L.J., Qu, J., Littles, J.W., and Savage, M.F., Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves, Journal of Applied Physics, Vol. 99 (12), 124913, 2006.
  67. Hu, J.W. and Leon, R.T., 2006. Analytical Characterization of the Performance of Thick Clip Angle Connections, submitted to International Journal of Steel Structures
  68. Hurlebaus, S. and Jacobs, L.J., Dual-probe laser interferometer for structural health monitoring, Journal of the Acoustical Society of America, 2006.
  69. J.M. Justice and K.E. Kurtis, Influence of Metakaolin Surface Area on Properties of Cement-based Materials, J. ASCE Materials in Civil Engineering, accepted for publication.
  70. J.M. Justice and K.E. Kurtis, Influence of Metakaolin Surface Area on Properties of Cement-based Materials, J. ASCE Materials in Civil Engineering, accepted for publication.
  71. Jayachandran, A. and White, D.W. (2006). Kinematically Exact Elastic Postbuckling Analysis of Planar Beams and Frames Using Reissners Theory, International Journal of Communications in Numerical Methods in Engineering, in review.
  72. Junge, M., Qu, J., and Jacobs, L.J., Relationship between Rayleigh wave polarization and state of stress, Ultrasonics, Vol. 44 (3), pp. 233-237, 2006.
  73. K. Thibodeaux and K.E. Kurtis, Assessing Potential for Alkali-Silica Reaction in Oilwell Cement Slurries containing Lightweight Aggregate, submitted to J. ASCE Materials in Civil Engineering, April 2006 (in revision).
  74. Kim, J.Y., Jacobs, L.J., Qu, J., and Littles, J.W., Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves, Journal of the Acoustical Society of America, 2006.
  75. Kim, J.Y., Qu, J., Jacobs, L.J., Littles, J.W., and Savage, M.F., Acoustic Nonlinearity Parameter due to Microplasticity, Journal of NDE, Vol. 25 (1), pp. 29-37, 2006.
  76. Kotte, O., Niethammer, M. and Jacobs, L.J., Lamb Wave Characterization by Differential Reassignment and Nonlinear Anisotropic Diffusion, NDT&E International, Vol. 39, pp. 96-105, 2006.
  77. Kuttig, H., Niethammer, M., Hurlebaus, S. and Jacobs, L.J., Model-based Analysis of Dispersion Curves, Journal of the Acoustical Society of America, 2006.
  78. Li, Y. and B. R. Ellingwood (2006), “Hurricane damage to residential construction in the US: Importance of uncertainty modelling in risk assessment,” Engrg. Struct. 28(7):1009-1018.
  79. Lynch, J.P., Wang, Y., Loh, K.J., Yi, J.-H. and Yun, C.-B. (2006). "Performance monitoring of the Geumdang Bridge using a dense network of high-resolution wireless sensors," Smart Materials and Structures, 15(6): 1561-1575.
  80. M. Lopez, L.F. Kahn, and K.E. Kurtis High-Strength Self-Curing Low-Shrinkage Concrete for Pavement Applications, invited submission for International Journal of Pavement Engineering, December 2006.
  81. M. Lopez, L.F. Kahn, and K.E. Kurtis, Characterization of elastic and time-dependent deformations in normal strength and high performance concrete by image analysis, submitted to Cement and Concrete Research, August 2006 (in revision).
  82. McCormick, J., DesRoches, R., Fugazza, D., and Auricchio, F. (2006). Seismic Vibration Control Using Superelastic Shape Memory Alloys, Journal of Engineering Materials and Technology, Vol 128, No. 3., pp. 294-301, July, 2006.
  83. McCormick, J., DesRoches, R., Fugazza, D., Auricchio, F. (2006). Seismic Assessment of Concentrically-Braced Frames Using Shape Memory Alloy Braces, ASCE Journal of Structural Engineering, November, 2006.
  84. McCormick, Tyber, J., Gall, K., DesRoches, R., and Maier, H. (2006). Structural Engineering with NiTi Part II: Mechanical Behavior and Scaling, ASCE Journal of Engineering Mechanics, Feb, 2006.
  85. Mori, Y. and B. R. Ellingwood (2006), “Reliability Assessment of RC Walls Degraded by Aggressive Operating Environments,” Computer-Aided Civil and Infrastructure Engrg. 21(3): 157-170.
  86. Muthukumar, S. and DesRoches, R. (2006) "Performance Evaluation and Comparison of Impact Models for Pounding Simulations," Earthquake Engineering Structural Dynamics, Vol 35, No. 7, pp. 811-828, June, 2006.
  87. Muthukumar, S. and DesRoches, R. (2006) “A Hertz Contact Model with Nonlinear Damping for Pounding Simulations,” Earthquake Engineering Structural Dynamics, Vol 35, No. 7, pp 811-828, June, 2006.
  88. N.H. El-Ashkar and K.E. Kurtis, A New Simple and Practical Method to Characterize Toughness of Fiber Reinforced Cement-Based Composites, J. ACI Materials, January/February 2006.
  89. N.H.A. El-Ashkar, H. Nanko, and K.E. Kurtis, Effect of Moisture State on Mechanical Behavior and Microstructure of Pulp Fiber-Cement Mortars, J. ASCE Materials in Civil Engineering, accepted for publication.
  90. N.H.A. El-Ashkar, H. Nanko, and K.E. Kurtis, Effect of Moisture State on Mechanical Behavior and Microstructure of Pulp Fiber-Cement Mortars, submitted to J. ASCE Materials in Civil Engineering, February 2006.
  91. N.N. Naik, A.C. Jupe, S.R. Stock, A.P. Wilkinson, and K.E. Kurtis, Sulfate Attack Monitored by MicroCT and EDXRD: Influence of Cement Type, Water-to-Cement Ratio, and Aggregate, Cement and Concrete Research, January 2006, V.6(1):144-59.
  92. Nielson, B. and DesRoches, R (2006). Seismic Fragility Curves for Typical Highway Bridge Classes in the Central and Southeastern United States. Earthquake Spectra, June, 2006.
  93. Nielson, B. and DesRoches, R. (2006) Probabilistic Seismic Analysis of Highway Bridges Using a Component Level Approach, Earthquake Engineering and Structural Dynamics, March, 2006.
  94. Nielson, B. and DesRoches, R. (2006). Influence of Modeling Assumptions on the Seismic Response of Multi-Span Simply Supported Steel Girder Bridges in Moderate Seismic Zones, Engineering Structures, Vol 28., No. 8, pp. 1083-1092, July, 2006.
  95. P.J.M. Monteiro and K.E. Kurtis, Experimental Asymptotic Analysis of Expansion of Concrete Exposed to Sulfate Attack, submitted to J. ACI Materials, November 2006.
  96. Padgett, J. E., DesRoches, R. (2006) Sensitivity of Response and Fragility to Parameter Uncertainty, ASCE Journal of Structural Engineering, September, 2006.
  97. Padgett, J. E., DesRoches, R. (2006) Three-Dimensional Nonlinear Seismic Performance Evaluation of Retrofit Measures for Typical Steel Girder Bridges, Engineering Structures, July, 2006.
  98. Punurai, W., Jarzynski, J., Qu, J., Kurtis, K.E., and Jacobs, L.J., Characterization of Entrained Air Voids in Cement Paste with Scattered Ultrasound, NDT&E International, 2006.
  99. Punurai, W., Jarzynski, J., Qu, Jianmin, Kurtis, K.E., and Jacobs, L.J., Characterization of dissipation losses in cement paste with diffuse ultrasound, Mechanics Research Communication, 2006.
  100. Punurai, W., Jarzynski, J., Qu, Jianmin, Kurtis, K.E., and Jacobs, L.J., Characterization of dissipation losses in cement paste with diffuse ultrasound, Mechanics Research Communication, accepted for publication, 2006
  101. Seo, Jun-Won, J. I. Craig, and B. J. Goodno, 2006. "Sensitivity study for regional seismic assessment of L-shaped concrete moment resisting frame structures. Manuscript under review by 2006 Structures Congress.
  102. Seo, Jun-Won, J. I. Craig, and B. J. Goodno, 2006. "Sensitivity study for regional seismic assessment of L-shaped concrete moment resisting frame structures, Proceedings (on CD-ROM) of 2006 ASCE/SEI Structures Congress, May 18-21, 2006, St. Louis, Missouri.
  103. Tyber, J., McCormick, J., Gall, K., DesRoches, R., Maier, H., Maksoud, A. (2006). Structural Engineering with NiTi Part I: Basic Materials Characterization, ASCE Journal of Engineering Mechanics, Feb, 2006.
  104. W. Punurai, J. Jarzynski, J. Qu, K.E. Kurtis, and L.J. Jacobs, Characterization of Entrained Air Voids in Cement Paste with Scattered Ultrasound, NDT&E International, accepted for publication.
  105. W. Punurai, J. Jarzynski, J. Qu, K.E. Kurtis, and L.J. Jacobs, Characterization of Entrained Air Voids in Cement Paste with Scattered Ultrasound, NDT&E International, V.39 (6):514-524, September 2006.
  106. W. Punurai, J. Jarzynski, J. Qu, K.E. Kurtis, and L.J. Jacobs, Characterization of Intrinsic Absorption Losses in Cement Paste with Diffuse Ultrasonic Energy, submitted to Ultrasonics.
  107. W. Punurai, J. Jarzynski, J. Qu, K.E. Kurtis, and L.J. Jacobs, Characterization of Intrinsic Absorption Losses in Cement Paste with Diffuse Ultrasound, Mechanics Research Communications, accepted for publication.
  108. White, D.W. (2006). Unified Flexural Resistance Equations for Stability Design of Steel I-Section Members  Overview, Journal of Structural Engineering, in review.
  109. White, D.W. and Barker, M. (2006). Shear Resistance of Transversely-Stiffened Steel I-Girders, Journal of Structural Engineering, in review.
  110. White, D.W. and Jung, S.-K. (2006). Effect of Web Distortion on the Buckling Strength of Noncomposite Discretely-Braced I-beams, Engineering Structures, in review.
  111. White, D.W. and Jung, S.-K. (2006). Unified Flexural Resistance Equations for Stability Design of Steel I-Section Members  Uniform Bending Tests, Journal of Structural Engineering, in review.
  112. White, D.W. and Kim, Y.D. (2006). Unified Flexural Resistance Equations for Stability Desgin of Steel I-Section Members  Moment Gradient Tests, Journal of Structural Engineering, in review.
  113. White, D.W., Barker, M. and Azizinamini, A. (2006). Shear Strength and Moment-Shear Interaction in Transversely-Stiffened Steel I-Girders, Journal of Structural Engineering, ASCE, accepted.
  114. White, D.W., Surovek, A.E., Alemdar, B.N., Chang, C.-J., Kim, Y.D. and Kuchenbecker, G.H. (2006). Stability Analysis and Design of Steel Building Frames Using the AISC 2005 Specification, International Journal of Steel Structures, in press.
  115. White, D.W., Surovek-Maleck, A., and Chang, C.-J. (2006). Direct Analysis and Design Using Amplified First-Order Analysis, Part 2 Moment Frames and General Framing Systems, Engineering Journal, AISC, in press.
  116. White, D.W., Surovek-Maleck, A., and Kim, S.C. (2006). Direct Analysis and Design Using Amplified First-Order Analysis, Part 1 Combined Braced and Gravity Framing Systems, Engineering Journal, AISC, in press.
  117. Yang, W., Leon, R. T., and DesRoches, R.(2006). Pushover Tests and Analysis of Braced Frames with Zipper Struts, ASCE Journal of Structural Engineering, August, 2006.
  118. Zureick, A.-H., R. M. Bennett and B. R. Ellingwood (2006), “Statistical characterization of FRP composite material properties for structural design,” J. Struct. Engrg. ASCE 132(8):1320-1327.
  119. Herrmann, J., Kim, J.Y., Jacobs, L.J., Qu, J., Littles, J.W., and Savage, M.F., Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves, Journal of Applied Physics, 2005.
  120. Alemdar, B.N. and White, D.W. (2005). Displacement, Flexibility and Mixed Beam-Column Finite Element Formulations for Distributed Plasticity Analysis, Journal of Structural Engineering, ASCE, **
  121. Andrawes, B. and DesRoches, R. (2005). Unseating Prevention of Bridges Using Superelastic Restrainers, Smart Materials and Structures, Vol 14, No. 3, pp. 60-67, June, 2005
  122. Andrawes, B. and DesRoches, R. (2006). Effect of Ambient Temperature on the Effectiveness of Shape Memory Alloy Seismic Bridge Restrainers, Engineering Structures, July, 2005.
  123. Auricchio, F., Fugazza, D., and DesRoches, R. (2006) A 1D Constitutive Model for Superelastic Shape Memory Alloys: Formulation and Comparison with Experimental Data, Smart Materials and Structure, April, 2005.
  124. B.J. Mohr, H. Nanko, and K.E. Kurtis, Durability of Kraft Pulp Fiber-Cement Composites to Wet/Dry Cycling, Cement and Concrete Composites, April 2005, V.27(4): 435-448.
  125. B.J. Mohr, H. Nanko, and K.E. Kurtis, Durability of Thermomechanical Pulp Fiber-Cement Composites to Wet/Dry Cycling, Cement and Concrete Research, August 2005, V.35(8): 1646-9.
  126. Barth, K.E., White, D.W., Righman, J.E. and Yang, L. (2005). Evaluation of Web Compactness Limits for Singly And Doubly Symmetric Steel I-Girders, Journal of Constructional Steel Research, 61(10), 1411-1454.
  127. Blum, F., Jarzynski, J. and Jacobs, L.J., A Focused Two-dimensional Air-coupled Ultrasonic Array for Non-contact Generation, NDT&E International, Vol. 38, pp. 634-642, 2005.
  128. Dogan, T., B. J. Goodno, and J. I. Craig. Hybrid Passive Control Using Base Isolation Systems and Ductile Cladding Connections in Steel Moment Frame Buildings, Proceedings (on CD-ROM) of The 8th National Conference in Earthquake Engineering, April 18-22, 2006, San Francisco, CA.
  129. Doyoyo M., Hu, J.W., "Plastic failure analysis of an auextic foam or inverted strut lattice under transverse and longitudinal loads", Journal of the Mechanics and Physics of Solids, 54, 7, 1479-1492, 2006. "Among the ScienceDirect Top25 Hottest Articles"
  130. Du, S., B. R. Ellingwood and J. V. Cox (2005), Initialization strategies in simulation based SFE eigenvalue analysis, Computer-aided Civil and Infrastruct. Engrg. 20(5):304-315.
  131. Du, S., B. R. Ellingwood and J. V. Cox (2005), Solution methods and initialization techniques in SFE analysis of structural stability, Probabilistic Engineering Mechanics 20(2):179-187.
  132. Dueñas-Osorio, L., J. I. Craig, and B. J. Goodno, 2005. "Interdependent response of networked systems." Manuscript under review by the ASCE Journal of Infrastructure Systems.
  133. Dueñas-Osorio, L., J. I. Craig, and B. J. Goodno, 2005. "Seismic response of critical interdependent networks. Manuscript under review by the IAEE Journal of Earthquake Engineering and Structural Dynamics.
  134. Dueñas-Osorio, L., K. Leelardcharoen, J. I. Craig, and B. J. Goodno, 2005. "Failure of interdependent networks. Manuscript accepted for publication by the 8th National Conference in Earthquake Engineering.
  135. Dueñas-Osorio, L., K. Leelardcharoen, J. I. Craig, and B. J. Goodno, 2005. "Failure of interdependent networks, Proceedings (on CD-ROM) of The 8th National Conference in Earthquake Engineering, April 18-22, 2006, San Francisco, CA.
  136. El-Hajjar, R.F., and Haj-Ali, R.M. 2005. Mode-I Fracture Toughness Testing of Thick Sections FRP Composites using the ESE(T) Specimen, Engineering Fracture Mechanics. Vol.72, No. 4, pp. 631-643.
  137. Ellingwood, B. R. (2005), Load combination requirements for fire-resistant structural design, J. Soc. Fire Protection Engrg. 15(1):43-61.
  138. Ellingwood, B. R. and D. O. Dusenberry (2005), Abnormal loads and progressive collapse, Computer-aided Civil and Infrastr. Engrg. 20(5):194-205.
  139. Ellingwood, B. R. and Y. K. Wen (2005), Risk-benefit based design decisions for low probability/high consequence earthquake events in Mid-America, Prog. In Struct. Engrg. and Mat. 7(2):56-70.
  140. Ellingwood, B.R. (2005), Risk-informed condition assessment of civil infrastructure: state of practice and research issues J. Struct. & Infrastruct. Engrg. 1(1):7-18.
  141. Junge, M., Qu, J., and Jacobs, L.J., Relationship between Rayleigh wave polarization and state of stress, Ultrasonics, 2005.
  142. Kim, J.Y., Qu, J., Jacobs, L.J., Littles, J.W., and Savage, M.F., Acoustic Nonlinearity Parameter due to Microplasticity, Journal of NDE, 2005.
  143. Kim, Y.D., Jung, S.-K. and White, D.W. (2005). Transverse Stiffener Requirements in Straight and Horizontally Curved Steel I-Girders, Journal of Bridge Engineering, ASCE, in press.
  144. Lafortune, P., McCormick, J., DesRoches, R., and Terriault, P. (2005). Testing of Superelastic Recentering Pre-Strained Braces for Seismic Resistant Design, Journal of Earthquake Engineering, December, 2005.
  145. Li, Q. and B. R. Ellingwood (2005), Structural response and damage assessment by enhanced uncoupled modal response history analysis, J. Earthquake Engrg., 9(5):719-737.
  146. M. Lopez, L.F. Kahn, and K.E. Kurtis, "Internal Curing in High Performance Concretes - a New Paradigm (in Spanish)" Revista Ingenieria de Construccion, August 2005, V.20(2):117-126
  147. M. P. Wnuk and A. Yavari, A correspondence principle for fractal and classical cracks, Engineering Fracture Mechanics 72, 2005, pp.2744-2757.
  148. Muliana, A.H. and Haj-Ali, R. M., Analysis for Creep Behavior and Collapse of Thick-Section Composite Structures, Composite Structures, Vol. 73, No. 3, pp. 331-341, 2005.
  149. Muliana, A.H. and Haj-Ali, R.M. 2005.Multi-scale Modeling for the Long-term Behavior of FRP Composite Structures, AIAA Journal, Vol. 43, No. 8, pp. 1815-1822.
  150. Muthukumar, S. and DesRoches, R. (2005) "Effect of Frame Restoring Force Characteristics on the Pounding Response of Multiple-Frame Bridges," Earthquake Spectra, Vol 14, No. 3, pp. 60-67, June, 2005.
  151. Nie, J. and B. R. Ellingwood (2005), FE-based structural reliability assessment using efficient directional simulation, J. Engrg. Mech. ASCE 131(3):259-267.
  152. S. Peer, K.E. Kurtis, and R. Zoughi, Evaluation of Microwave Reflection Properties of Cyclically Soaked Mortar Based on a Semi-Empirical Electromagnetic Model, IEEE Transactions on Instrumentation and Measurement, October 2005, V.54(5):2049-2060.
  153. Seo, Jun-Won, J. I. Craig, and B. J. Goodno, 2005. "Rapid seismic response of L-shaped steel moment resisting frame structures using response surface metamodels. Manuscript accepted for publication by the 8th National Conference in Earthquake Engineering.
  154. Seo, Jun-Won, J. I. Craig, and B. J. Goodno, 2005. "Rapid seismic response of L-shaped steel moment resisting frame structures using response surface metamodels, Proceedings (on CD-ROM) of The 8th National Conference in Earthquake Engineering, April 18-22, 2006, San Francisco, CA.
  155. Seo, Jun-Won, Peeranan Towashiraporn, Leonardo Duenas-Osorio, James I. Craig and Barry J. Goodno, 2005. "Rapid seismic fragility assessment of structures using response surface metamodels. Proceedings of the 3rd annual meeting of the Asian-pacific network of centers for earthquake engineering research (ANCER). Seogwipo, Jeju, South Korea. Nov. 10-13.
  156. Surovek-Maleck, A., White, D.W. and Leon, R.T. (2005). Direct Analysis and Design of Partially-Restrained Steel Framing Systems, Journal of Structural Engineering, ASCE, 131(9), 1376-1389.
  157. Tahakashi, T. and B.R. Ellingwood (2005). Reliability-based assessment of roofs subjected to extreme snows: value of site-specific data. Engineering Structures 27(1):89-95.
  158. Wen, Y.K. and B. R. Ellingwood (2005), The role of fragility assessment in consequence-based engineering, Earthquake Spectra, EERI 21(3):861-877.
  159. White, D.W. and Chang, C.-J. (2005). Improved Flexural Stability Design of I-Section Members in AISC (2005)  A Case Study Comparison to AISC (1989) ASD, Engineering Journal, AISC, in press.
  160. Z. P. Bazant and A. Yavari, The cause of size effect on structural strength: Is it fractal or energetic-statistical?, Engineering Fracture Mechanics 72, 2005, pp.1-31. /Among the ScienceDirect Top25 Hottest Articles./
  161. A. Nosier and A. Yavari, Surface balance laws of linear and angular momenta and Cauchy's stress theorem, Scientia Iranica 11(1-2), 2004, pp.21-25.
  162. Alqam, Maha, Bennet, Richard, M., and Zureick, Abdul-Hamid (2004). Probabilistic Design of Concentrically loaded FRP Compression Memmbers, ASCE Journal of Structural Engineering, to appear in December
  163. Blum, F., Jarzynski, J. and Jacobs, L.J., A Focused Two-dimensional Air-coupled Ultrasonic Array for Non-contact Generation, NDT&E International, 2004.
  164. Braverman, J.I, C.A. Miller, C.H. Hofmayer, B.R. Ellingwood and D.J. Naus (2004). Degradation assessment of structures and passive components at nuclear power plants. Nuclear Engrg. & Des. 228(4):283-304.
  165. Braverman, J.I, C.A. Miller, C.H. Hofmayer, B.R. Ellingwood and D.J. Naus (2004). Degradation assessment of structures and passive components at nuclear power plants. Nuclear Engrg. & Des. 228(4):283-304.
  166. C.L. Collins, J.H. Ideker, and K.E. Kurtis, Laser Scanning Confocal Microscopy for In Situ Monitoring of Alkali-Silica Reaction, Journal of Microscopy, Feb 2004, V.213(2):149-157.
  167. C.L. Collins, J.H. Ideker, G.S. Willis, and K.E. Kurtis, Examination of the Effects of LiOH, LiCl, and LiNO3 on Alkali-Silica Reaction, Cement and Concrete Research, August 2004, V.34(8):1403-1415.
  168. DesRoches, R. (2004). Applications of Shape Memory Alloys in Seismic Retrofit of Civil Structures, Proceedings of Shape Memory and Superelastic Technology Conference, Baden Baden, Germany, Oct 4-9, 2004.
  169. DesRoches, R. and Muthukumar, S. (2004). Implications of Seismic Pounding on the Longitudinal Response of Multi-Span Bridges, An Analytical Perspective, Journal of Earthquake Engineering and Vibration, Vol 3, No. 1, pp. 1-9.
  170. DesRoches, R. McCormick, J., and Delemont, M. A. (2004). Cyclical Properties of Superelastic Shape Memory Alloys, ASCE Journal of Structural Engineering, Vol 130, No. 1, pp. 38-46, January, 2004.
  171. DesRoches, R., Choi, E., Leon, R. T., Aschheim, M., Dyke, S. T. (2004). "Seismic Response of Multi-Span Steel Bridges in Mid-America: Part I: As-Built Response," ASCE Journal of Bridge Engineering, Vol 9, No. 5, pp. 1-9, September, 2004.
  172. DesRoches, R., Choi, E., Leon, R. T., Pfeifer, T. (2004). "Seismic Response of Multi-Span Steel Bridges in Mid-America: Part II: Retrofitted," ASCE Journal of Bridge Engineering, Vol 9, No. 5, pp. 10-17, September, 2004.
  173. Dueñas-Osorio, L., J. I. Craig, and B. J. Goodno, 2004. "Probabilistic response of interdependent infrastructure networks." Proceedings of the 2nd annual meeting of the Asian-pacific network of centers for earthquake engineering research (ANCER). Honolulu, Hawaii, USA, July 28-30.
  174. Dueñas-Osorio, L., J. I. Craig, and B. J. Goodno, 2004. "Rapid regional response simulation of 3D prototype structures for fragility characterization." 13th World Conference in Earthquake Engineering. Vancouver, Canada, August 1-6, 13p.
  175. Dueñas-Osorio, L., J. Park, P. Towashiraporn, J. I. Craig, B. J. Goodno, A. Bostrom, and D. Frost, 2004. "Passive response modification for fragility reduction within Consequence Based Engineering (CBE)." International Journal of Structural Engineering and Mechanics (JSEM), Vol. 17, No. 3-4. Taejon, Korea: TechnoPress, March issue, 11p.
  176. El-Hajjar, R. F., and Haj-Ali, R. M., 2004, In-plane Shear Testing of Thick-Section Pultruded FRP Composites using a Modified Arcan Fixture, Composites Part B: Engineering, Vol. 35, No. 5, pp. 421-428.
  177. El-Hajjar, R. F., and Haj-Ali, R. M., 2004, Infrared (IR) Thermography for Strain Analysis in Pultruded Fiber Reinforced Plastics, Experimental Techniques, Society for Experimental Mechanics (SEM), Vol. 28, No. 2.
  178. Ellingwood, B.R., D.V. Rosowsky,  Y. Li and J.H. Kim (2004),  "Fragility assessment of light-frame wood construction subjected to wind and earthquake hazards," J. Struct. Engrg. ASCE 130(12):1921-1930.
  179. Ellingwood, B.R., D.V. Rosowsky,  Y. Li and J.H. Kim (2004),  "Fragility assessment of light-frame wood construction subjected to wind and earthquake hazards," J. Struct. Engrg. ASCE 130(12):1921-1930.
  180. Green, T. P., Leon, R.T. and Rassati, G.A., 2004 Bidirectional Tests on Partially Restrained, Composite Beam-Column Connections, Journal of Structural Engineering, v. 130, n. 2, pp 320-327.
  181. Haj-Ali, R. M., and El-Hajjar, R. F., 2004, A Thermoelastic Method for Strain Measurement in Coated Orthotropic Materials, Experimental Mechanics.
  182. Haj-Ali, R. M., Muliana, A. H., 2004, A multi-scale constitutive formulation for the nonlinear viscoelastic analysis of laminated composite materials and structures, International Journal of Solids and Structures, Vol. 41, No. 13, pp. 3461-3490.
  183. Haj-Ali, R. M., Muliana, A. H., 2004, Numerical Finite Element Formulation of the Schapery Nonlinear Viscoelastic Material Model, International Journal for Numerical Methods in Engineering (IJNME), Vol. 59, No. 1, pp. 25-45.
  184. Kahn, Lawrence F., and Slapkus, Adam, Interface Shear in High Strength Composite Beams, PCI JOURNAL, V. 49, No. 4, July/August 2004, pp. 102-110.
  185. Kim, S.-C. and White, D.W. (2004). Nonlinear Analysis of a One-Story Low-Rise Masonry Building with a Flexible Diaphragm Subjected to Seismic Excitation, Engineering Structures,. 26, 2053-2067.
  186. Lamanna, A., Bank, L., and Scott, D., "Flexural Strengthening of RC Beams By Mechanically Attaching FRP Strips," ASCE Journal of Composites for Construction, Vol. 8, No. 3, June 2004, pp. 203-210.
  187. Lopez, Mauricio; Kahn, Lawrence; and Kurtis, Kimberly; Creep and Shrinkage of High Performance Lightweight Concrete, ACI Materials Journal, V. 101, No. 5, Sept/Oct. 2004, pp. 391-399
  188. M. Lopez, L.F. Kahn, and K.E. Kurtis, Creep and Shrinkage of High Performance Lightweight Concrete, J. ACI Materials, September/October 2004, V101(5):391-399.
  189. Mohr D., Doyoyo M., "Deformation-induced folding systems in thin-walled monolithic hexagonal metallic honeycomb under multi-axial loading," International Journal of Solids and Structures, 41(11-12), 3353-3377, 2004.
  190. Mohr D., Doyoyo M., "Experimental investigation on the plasticity of hexagonal aluminum honeycomb," Journal of Applied Mechanics, 71,3, 375-385, 2004.
  191. Mohr D., Doyoyo M., "Large plastic deformation of metallic honeycomb: Orthotropic rate-independent constitutive model, " International Journal of Solids and Structures, 41(16-17), 4435-4456, 2004. "Among the ScienceDirect Top25 Hottest Articles"
  192. Muliana, A.H. and Haj-Ali, R. M., 2004, Nested nonlinear viscoelastic and micromechanical models for the analysis of pultruded composite materials and structures, Mechanics of Materials (MoM) Journal, Vol. 36, No. 11, pp. 1087-1110.
  193. Naus, D.J., B. R. Ellingwood and H. L. Graves (2004), Methods for assessing NPP containment pressure boundary integrity, Nuclear Engrg. & Des. 228(1-3): 55-72
  194. Naus, D.J., B. R. Ellingwood and H. L. Graves (2004), Methods for assessing NPP containment pressure boundary integrity, Nuclear Engrg. & Des. 228(1-3): 55-72.
  195. Nie, J. and B.R. Ellingwood (2004), A new directional simulation method for system reliability I: Application of deterministic point sets, Probabilistic Engrg. Mech. 19(4):425-436.
  196. Nie, J. and B.R. Ellingwood (2004), A new directional simulation method for system reliability II: Application of neural networks, Probabilistic Engrg. Mech. 19(4):437-447.
  197. Ocel, J., DesRoches, R., Leon, R. T., Krumme, R., Hayes, J.R., and Sweeney, S. (2004). Steel Beam-Column Connections Using Shape Memory Alloys, ASCE Journal of Structural Engineering, Vol 130, No. 5, pp. 732-740, May, 2004.
  198. Ocel, J., DesRoches, R., Leon, R.T., Hess, W.G., Krumme, R., Hayes, J.R. and Sweeney, S., 2004. Steel Beam-Column Connections Using Shape Memory Alloys, to appear in Journal of Structural Engineering, v. 130, n. 5, pp.732-740.
  199. Park, J., B. Goodno, A. Bostrom, J. Craig, 2004. Probabilistic Decision Analysis for Seismic Rehabilitation of a Regional Building System. 13th World Conference in Earthquake Engineering. Vancouver, Canada, August 1-6, 14p.
  200. Rassati, G.A. and Leon, R.T., 2004. Component Modeling of PR Composite Frames under Cyclic and Dynamic Loading: Numerical Modeling, International Journal of Steel Structures, Vol. 4, No. 3, pp. 131-140.
  201. Rassati, G.A., Leon, R.T., and Noe, S.,2004 Component Modeling of Partially Restrained Composite Joints under Cyclic and Dynamic Loading, Journal of Structural Engineering, v. 130, n. 2, pp. 343-351.
  202. S. Peer, K.E. Kurtis, and R. Zoughi, An Electromagnetic Model for Evaluating Temporal Water Distribution and Movement in Cyclically Soaked Mortar, IEEE Transactions on Instrumentation and Measurement, April 2004, V.53(2):406-415.
  203. Scott., D., and Dempsey, D., The Use of Mechanically Fastened FRP Strips to Strengthen Wood Sections in Flexure, Proceedings of the 2nd International Conference on FRP Composites in Civil Engineering, Dec 2004 (submitted)
  204. Towashiraporn, P., J. I. Craig, and B. J. Goodno, 2004. "Probabilistic response simulation and regional vulnerability determination using response surface metamodels." 13th World Conference in Earthquake Engineering. Vancouver, Canada, August 1-6, 8p.

Proceedings

  1. Lopez, Mauricio; Kahn, Lawrence; Buchberg, Brandon; and Kurtis, Kimberly; Creep and Shrinkage of High Strength Lightweight Concrete, submitted for ACI 7th International Symposium on Utilization of High-Strength/High Performance Concrete, June 2005
  2. A. Yavari and A. Ozakin, A Covariant Continuum Theory of Solids with Distributed Defects, 13th International Symposium on Plasticity and its Current Applications, Alaska, June 2007.
  3. A. Yavari and A. Ozakin, A covariant continuum theory of solids with distributed defects, Modeling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering, Prague, Czech Republic, 25-27 June, 2007.
  4. Bermes, C., Kim, J.Y., Qu, J., and Jacobs, L.J., Experimental characterization of material nonlinearity using Lamb waves, Applied Physics Letters, Vol. 90 (2), 021901, 2007.
  5. Haj-Ali, R. M., Engelstad, S. and Walker, J., Cohesive Micromechanical Model for Progressive Damage Analysis of Composite Materials and Structures, the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Hawaii, April 2007, In Press, 12 pp.
  6. Loh, K.J., Lynch, J.P., Wang, Y., Law, K.H., Fraser, M. and Elgamal, A. (2007). "Validation of a wireless traffic vibration monitoring system for the Voigt Bridge," Proceedings of the World Forum on Smart Materials and Smart Structures Technology (SMSST07), Chongqing & Nanjing, China, May 22 - 27, 2007.
  7. Nielson, B. G. and DesRoches, R. (2007).Development of Bridge Component Limit States Using Baysian Updating, Proceedings of the 10th Annual International Conference , Tokyo, Japan, August, 2007.
  8. Padgett, J. E. and DesRoches, R. (2007). Seismic Retrofit Performance with Multi-Level Performance Objectives, Proceedings of the Transportation Research Record: Journal of the Transportation Research Board, Washington DC, January, 2007.
  9. Padgett, J. E. and DesRoches, R. (2007). “Sensitivity of Response and Fragility to Parameter Uncertainty,” ASCE Journal of Structural Engineering, Vol 133, No. 12, December, 2007
  10. Punurai, W., Jarzynski, J., Qu, Jianmin, Kim, J.-Y., Jacobs, L.J., and Kurtis, K.E., Characterization of multi-scale porosity in cement paste by advanced ultrasonic techniques, Cement and ConcreteResearch, Vol. 37, pp. 38-46, 2007.
  11. Wang, Y., Loh, K.J., Lynch, J.P. and Law, K.H. (2007). "Wireless sensing and control," Proceedings of the International Conference on Smart Materials and Nanotechnology in Engineering, Harbin, China, July 1 - 4, 2007.
  12. Wang, Y., Lynch, J.P. and Law, K.H. (2007). "Decentralized H∞ controller design for large-scale wireless structural sensing and control systems," Proceedings of the 6th International Workshop on Structural Health Monitoring, Stanford, CA, September 11 - 13, 2007.
  13. Wang, Y., Lynch, J.P. and Law, K.H. (2007). "Information driven wireless sensing and control for civil structures," Proceedings of the World Forum on Smart Materials and Smart Structures Technology (SMSST07), Chongqing & Nanjing, China, May 22 - 27, 2007.
  14. Wang, Y., Lynch, J.P. and Law, K.H. (2007). "Wireless sensing technologies for civil infrastructure monitoring and management," Proceedings of the 5th International Seminar for Safety of Infrastructures, Seoul, Korea, September 14, 2007.
  15. Wang, Y., Lynch, J.P., Law, K.H., Loh, C.-H. and Elgamal, A. (2007). "Reliable information management in a low-cost wireless structural monitoring and control network," Proceedings of SPIE 14th International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, 6529: 65291J, San Diego, CA, March 18 - 22, 2007.
  16. Wang, Y., Swartz, R.A., Lynch, J.P., Law, K.H. and Loh, C.-H. (2007). "Performance evaluation of decentralized wireless sensing and control in civil structures," Proceedings of SPIE 14th International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, 6531: 653113, San Diego, CA, March 18 - 22, 2007.
  17. B.J. Mohr and K.E. Kurtis, Fractography of Fiber-Cement Composites Via Laser Scanning Confocal Microscopy, 16th European Conference on Fracture, Measuring, Monitoring, and Modeling Concrete Properties: in Honor of Surendra P. Shah, Alexandroupolis, Greece, July 3-7, 2006.
  18. B.J. Mohr and K.E. Kurtis, Fractography of Fiber-Cement Composites Via Laser Scanning Confocal Microscopy, Proc. 16th European Conference on Fracture, Measuring, Monitoring, and Modeling Concrete Properties: in Honor of Surendra P. Shah, Ed. M.S. Konsta-Gdoutos, Alexandroupolis, Greece, July 3-7, 2006, p.503-508
  19. Chang, C.-J. and White, D.W. (2006). Construction Simulation of Curved I-Girder Bridge Systems, Annual Proceedings, Structural Stability Research Council, 93-114.
  20. DesRoches, R., McCormick, J. (2006). Behavior of Large Diameter Superelastic NiTi SMA Bars for Seismic Application in Buildings, Proceedings of the 8th National Conference in Earthquake Engineering, San Francisco, CA., May, 2006.
  21. DesRoches, R., Nielson, B., and Padgett, J.E. (2006). Fragility Curves for Mid-America Bridges, Proceedings of the 8th National Conference in Earthquake Engineering, San Francisco, CA., May, 2006.
  22. DesRoches, R., Padgett, J.E., Elnashai, A., Kim, Y., Reed, D. (2006). MAE Center Transportation Test Bed Project, Proceedings of the 8th National Conference in Earthquake Engineering, San Francisco, CA., May, 2006.
  23. Doyoyo M., "Functions and properties of direct-action vs. crushable lattice materials systems", Proceedings of the 15th U.S. National Congress on Theoretical and Applied Mechanics, Boulder, Colorado, June 2006, M3a.
  24. Haj-Ali, R. M., Johnson, S. J., Infrared Thermography for Failure Initiation and Progression in Composite Lap Shear Joints.,Fatigue 2006, May, Atlanta, Georgia, USA, 8 pp., 2006.
  25. Herrmann, J., Jacobs, L.J., Qu, J. and Kim, J.-Y., Generation and detection of higher harmonics in Rayleigh waves using laser ultrasound, presented at 32nd Annual Review of Progress in Quantitative Nondestructive Evaluation, Brunswick, Maine, July 31-August 5, 2005, Vol. 25, 2006.
  26. Herrmann, J., Kim, J.Y., Jacobs, L.J., Qu, J., Littles, J.W., and Savage, M.F., Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves, Journal of Applied Physics, Vol. 99 (12), 124913, 2006.
  27. Hite, M. and DesRoches, R. (2006). Seismic Performance of Bridge Steel Pedestals, Proceedings of the 5th National Seismic Bridge Conference, San Francisco, CA., September, 2006.
  28. Hite, M., and DesRoches, R. (2006). Evaluation of the Performance of Bridge Steel Pedestals Under Seismic Loads, Proceedings of the ASCE Structures Congress, St. Louis, MO., April, 2006.
  29. Hite, M., and DesRoches, R. (2006). Experimental Evaluation of Steel Pedestals Under Seismic Loads, Proceedings of the 8th National Conference in Earthquake Engineering, San Francisco, CA., May, 2006.
  30. Hurlebaus, S. and Jacobs, L.J., Dual-probe laser interferometer for structural health monitoring, Journal of the Acoustical Society of America, Vol. 119 (7) pp. 1923-1925, 2006.
  31. Johnson, S. M., Kim, H-K, Wei, B-S, Haj-Ali, R. M., Infrared Thermography for Fatigue Damage in Hybrid Titanium Composite Laminates, Fatigue 2006, May 14-19, Atlanta, Georgia, USA, 8 pp., 2006.
  32. Jung, S.-K. and White, D.W. (2006). Strength Behavior of Horizontally Curved Composite I-Girder Bridge Structural Systems, Annual Proceedings, Structural Stability Research Council, 143-162.
  33. Junge, M., Qu, J., and Jacobs, L.J., Relationship between Rayleigh wave polarization and state of stress, Ultrasonics, Vol. 44 (3), pp. 233-237, 2006.
  34. K.E. Kurtis, N. Naik, S.R. Stock, P.L. Lee, A.P. Wilkinson, and A.C. Jupe, Multi-mode X-ray Study of Sodium and Magnesium Sulfate Attack of Portland Cement, Denver X-ray Conference, Denver, Colorado, August 1-5, 2005, published in Advances in X-ray Analysis.
  35. Kim, J.Y., Jacobs, L.J., Qu, J., and Littles, J.W., Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves, Journal of the Acoustical Society of America, Vol. 120 (3) pp. 1266-1273, 2006.
  36. Kim, J.Y., Qu, J., Jacobs, L.J., Littles, J.W., and Savage, M.F., Acoustic Nonlinearity Parameter due to Microplasticity, Journal of NDE, Vol. 25 (1), pp. 29-37, 2006.
  37. Kotte, O., Niethammer, M. and Jacobs, L.J., Lamb Wave Characterization by Differential Reassignment and Nonlinear Anisotropic Diffusion, NDT&E International, Vol. 39, pp. 96-105, 2006.
  38. Kuttig, H., Niethammer, M., Hurlebaus, S. and Jacobs, L.J., Model-based Analysis of Dispersion Curves, Journal of the Acoustical Society of America, Vol. 119 (7), pp. 2122-2130, 2006.
  39. Loh, C.-H., Lu, K.-C., Wang, Y., Swartz, R.A., Lynch, J.P. and Law, K.H. (2006). "Discussion on the application of wireless active sensing unit for structural control," Proceedings of the 4th World Conference on Structural Control and Monitoring, San Diego, CA, USA, July 11 - 13, 2006.
  40. Lu, K.-C., Wang, Y., Lynch, J.P., Loh, C.-H., Chen, Y.-J., Lin, P.-Y. and Lee, Z.-K. (2006). "Ambient vibration study of Gi-Lu cable-stay bridge: application of wireless sensing units," Proceedings of SPIE 13th Annual Symposium on Smart Structures and Materials, 6174: 61741D, San Diego, CA, February 26 - March 2, 2006.
  41. Luangvilai, K., Jacobs, L.J., and Qu, J., Modal decomposition of double-mode Lamb waves, presented at 32nd Annual Review of Progress in Quantitative Nondestructive Evaluation, Brunswick, Maine, July 31-August 5, 2005, Vol. 25, 2006.
  42. Luangvilai, K., Jacobs, L.J., and Qu, Jianmin, An improved technique for modal decomposition of a double-mode Lamb wave signal, presented at the 13th Annual International Symposium on Smart Structures and Materials, San Diego, California, February, 2006, SPIE Proceedings 6176, pp. 145-154, 2006.
  43. Lynch, J.P., Wang, Y., Loh, K.J., Yi, J.-H. and Yun, C.-B. (2006). "Wireless structural monitoring of the Geumdang Bridge using resolution enhancing signal conditioning," Proceedings of the 24th International Modal Analysis Conference (IMAC XXIV), St. Louis, MO, January 31 - February 2, 2006.
  44. Lynch, J.P., Wang, Y., Lu, K.-C., Hou, T.-C. and Loh, C.-H. (2006). "Post-seismic damage assessment of steel structures instrumented with self-interrogating wireless sensors," Proceedings of the 8th National Conference on Earthquake Engineering, San Francisco, CA, April 18 - 21, 2006.
  45. M. Lopez, K.E. Kurtis, and L.F. Kahn, Pre-wetted Lightweight Coarse Aggregate Reduces Long-term Deformations of High Performance Concrete, Proc. Seventh CANMET/ACI International Conference on Durability of Concrete, Montreal, May 28-June 3, 2006.
  46. M. Lopez, K.E. Kurtis, and L.F. Kahn, Pre-wetted Lightweight Coarse Aggregate Reduces Long-term Deformations of High Performance Concrete, Proc. Seventh CANMET/ACI International Conference on Durability of Concrete, Montreal, May 28-June 3, 2006.
  47. McCormick, J. and DesRoches, R. (2006). Testing and Characterization of Large Diameter SMA Bars for Applications in Earthquake Engineering, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA., May 2006.
  48. Mueller, T.O., Kim, J-Y, Qu, J. and Jacobs, L.J., Nonlinear acoustic measurements and Rayleigh waves, presented at 32nd Annual Review of Progress in Quantitative Nondestructive Evaluation, Brunswick, Maine, July 31-August 5, 2005, Vol. 25, 2006.
  49. Nielson, B. and DesRoches, R. (2006). Effect of Using PGA versus Sa on the Uncertainty in Probabilistic Seismic Demands Models of Bridges, Proceedings of the 8th National Conference in Earthquake Engineering, San Francisco, CA., May, 2006.
  50. Nielson, B. and DesRoches, R. (2006). Seismic Fragility Methodology For Highway Bridge Using A Component Level Approach, Proceedings of the ASCE Structures Congress, St. Louis, MO., April, 2006.
  51. Nielson, B. and DesRoches, R. (2006). Seismic Modeling and Performance of Typical Multi-Span Simply Supported Steel Girder Bridges, Proceedings of the 7th International Conference on Short and Medium Span Bridge, Montreal, Canada, August, 2006.
  52. Padgett, J. and DesRoches, R. (2006). Comparative Study of the Seismic Performance of Typical Retrofitted Multi-Span Steel Girder Bridges, Proceedings of the 7th International Conference on Short and Medium Span Bridge, Montreal, Canada, August, 2006.
  53. Padgett, J. and DesRoches, R. (2006). Large Scale Testing of SMA Recentering Devices for Applications in Earthquake Engineering, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA., May 2006.
  54. Padgett, J. and DesRoches, R. (2006). Retrofitted Bridge Fragility Curves for Assessing the Impact of Retrofit on Bridge System Performance, Proceedings of the ASCE Structures Congress, St. Louis, MO., April, 2006.
  55. Padgett, J. E. and DesRoches, R. (2006). Evaluation of Bridge Retrofits in Regions of Low-to-Moderate Seismicity, Proceedings of the 5th National Seismic Bridge Conference, San Francisco, CA., September, 2006.
  56. Padgett, J. E., and DesRoches, R. (2006). Bridge Damage-Functionality Using Expert Opinion Survey, Proceedings of the 8th National Conference in Earthquake Engineering, San Francisco, CA., May, 2006.
  57. Punurai, W., Jacobs, L.J., Kurtis, K., Jarzynski, J., and Qu, Jianmin, Characterization of entrained air voids using scattered ultrasound, presented at 32nd Annual Review of Progress in Quantitative Nondestructive Evaluation, Brunswick, Maine, July 31-August 5, 2005, Vol. 25, 2006.
  58. Punurai, W., Jarzynski, J., Qu, J., Kurtis, K.E., and Jacobs, L.J., Characterization of Entrained Air Voids in Cement Paste with Scattered Ultrasound, NDT&E International, Vol. 39 (6), pp. 514-524, 2006.
  59. Punurai, W., Jarzynski, J., Qu, Jianmin, Kurtis, K.E., and Jacobs, L.J., Characterization of dissipation losses in cement paste with diffuse ultrasound, Mechanics Research Communication, 2006.
  60. Surovek, A., Camotim, D., Hajjar, J., Teh, L., White, D., and Ziemian, R. (2006). Direct Second-Order Analysis for the Design of Steel Structures, Proceedings, Structures Congress, ASCE/SEI, to appear.
  61. W. Punurai, L.J. Jacobs, L.J., K.E.Kurtis, J. Jarzynski, and J. Qu, Characterization of entrained air voids using scattered ultrasound, presented at 32nd Annual Review of Progress in Quantitative Nondestructive Evaluation, Brunswick, Maine, July 31-August 5, 2005, to appear Vol. 25, 2006.
  62. Wang, Y., Loh, K.J., Lynch, J.P., Fraser, M., Law, K.H. and Elgamal, A. (2006). "Vibration monitoring of the Voigt Bridge using wired and wireless monitoring systems," Proceedings of the 4th China-Japan-US Symposium on Structural Control and Monitoring, Hangzhou, China, October 16 - 17, 2006.
  63. Wang, Y., Swartz, R.A., Lynch, J.P., Law, K.H., Lu, K.-C. and Loh, C.-H. (2006). "Application of decentralized wireless sensing and control in civil structures," Proceedings of the US-Taiwan Workshop on Smart Structural Technology for Seismic Hazard Mitigation, Taipei, Taiwan, October 12-14, 2006.
  64. Wang, Y., Swartz, R.A., Lynch, J.P., Law, K.H., Lu, K.-C. and Loh, C.-H. (2006). "Decentralized civil structural control using a real-time wireless sensing and control system," Proceedings of the 4th World Conference on Structural Control and Monitoring, San Diego, CA, USA, July 11 - 13, 2006.
  65. Wang, Y., Swartz, R.A., Lynch, J.P., Law, K.H., Lu, K.-C. and Loh, C.-H. (2006). "Decentralized real-time velocity feedback control of structures using wireless sensors," Proceedings of the 4th International Conference on Earthquake Engineering, Taipei, Taiwan, October 12-13, 2006.
  66. Wang, Y., Swartz, R.A., Lynch, J.P., Law, K.H., Lu, K.-C. and Loh, C.-H. (2006). "Wireless feedback structural control with embedded computing," Proceedings of SPIE 11th International Symposium on Nondestructive Evaluation for Health Monitoring and Diagnostics, 6177: 61770C, San Diego, CA, February 26 - March 2, 2006.
  67. Yang, W., Leon, R.T., and DesRoches, R. (2006). On the Development of Zipper Frames by Pushover, The fifth Behavior of Steel Structures in Seismic Areas Conference, Yokohama, 2006.
  68. Kotte, O., Niethammer, M., and Jacobs, L.J., Differential reassignment for Lamb wave characterization, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, pp. 120-125, Vol. 24A, 2005.
  69. Kotte, O., Niethammer, M., and Jacobs, L.J., Differential reassignment for Lamb wave characterization, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, Vol. 24, 2005.
  70. Andrawes, B., and DesRoches, R. (2005). Effect of Ambient Temperature on the Performance of Shape Memory Alloys, Proceedings of the SPIE Annual Conference, San Diego, CA., March 4-7, 2005.
  71. B.J. Mohr, L. Premenko, H. Nanko, and K.E. Kurtis, Examination of Wood-Derived Powders and Fibers for Internal Curing of Cement-Based Materials, Proc. 4th International Seminar on Self-Desiccation and its Importance in Concrete Technology, Eds. B. Persson, D. Bentz, and L.O. Nilsson, NIST, Gaithersburg, MD, June 20, 2005,pp. 229-244.
  72. Chang, C.-J., White, D.W., Beshah, F. and Wright, W. (2005). Design Analysis of Curved I-Girder Bridge Systems  An Assessment of Modeling Strategies, Annual Proceedings, Structural Stability Research Council, 349-369.
  73. J.M. Justice, L.H. Kennison, B.J. Mohr, S.L. Beckwith, L.E. McCormick, B. Wiggins, Z.Z. Zhang, and K.E. Kurtis, Comparison of Two Metakaolins and Silica Fume Used as Supplementary Cementitious Materials, Seventh International Symposium on Utilization of High-Strength/High Performance Concrete, SP-228, published by American Concrete Institute, Washington D.C., June 20-24, 2005, pp. 213-236.
  74. J.W. Kock, R.J. Barbieri, J.M. Justice , K.E. Kurtis , T.R. Gentry, H. Nanko, Characterization of Chicken Feather Materials for Use in Biocomposites, Proc. American Society for Composites (ASC) 20th Annual Technical Conference, Philadelphia, PA,September 7-9, 2005.
  75. Jung, S.-K., White, D.W., Beshah, F. and Wright, W. (2005). Ultimate Strength of Horizontally Curved Composite I-Girder Bridge Structural Systems, Annual Proceedings, Structural Stability Research Council, 327-347.
  76. Kreuzinger, T., Hurlebaus, S., Michaels, J.E., and Jacobs, L.J., A modeling approach to interpret the dispersion relationship for piezoelectric sources, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, pp. 196-202, Vol. 24A, 2005.
  77. Kreuzinger, T., Hurlebaus, S., Michaels, J.E., and Jacobs, L.J., A modeling approach to interpret the dispersion relationship for piezoelectric sources, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, Vol. 24, 2005.
  78. Leon, R.T., Yang, C. H., DesRoches, R., Reinhorn, A., Schachter, M., Stojadinovic, B., Yang, T., Shing, B., and Wei, Z. (2005). Results of Early Collaboration Research on Behavior of Braced Steel Frames with Innovative Bracing Systems, Proceedings.
  79. Lu, K.-C., Wang, Y., Lynch, J.P., Lin, P.-Y., Loh, C.-H. and Law, K.H. (2005). "Application of wireless sensors for structural health monitoring and control," Proceedings of the 18th KKCNN Symposium on Civil Engineering, Kaoshong, Taiwan, December 18 - 20, 2005.
  80. Luangvilai, K., Jacobs, L.J., Wilcox, P.D., Lowe, M.J.S., and Qu, Jianmin, Broadband Attenuation Measurement for an Absorbing Plate, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, pp. 297-304, Vol. 24A, 2005.
  81. Luangvilai, K., Jacobs, L.J., Wilcox, P.D., Lowe, M.J.S., and Qu, Jianmin, Broadband Attenuation Measurement for an Absorbing Plate, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, Vol. 24, 2005.
  82. Lynch, J.P., Loh, K.J., Hou, T.-C., Wang, Y., Yi, J.-H., Yun, C.-B., Lu, K.-C. and Loh, C.-H. (2005). "Validation case studies of wireless monitoring systems in civil structures," Proceedings of the 2nd International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-2), Shenzhen, China, November 16 - 18, 2005.
  83. Lynch, J.P., Wang, Y., Law, K.H., Yi, J.-H., Lee, C.-G. and Yun, C.-B. (2005). "Validation of a large-scale wireless structural monitoring system on the Geumdang Bridge," Proceedings of the 9th International Conference on Structural Safety and Reliability, Rome, Italy, June 19 - 23, 2005.
  84. M. Lopez, L.F. Kahn, B. Buchberg, and K.E. Kurtis, Creep and Shrinkage in High-Strength, Lightweight Concrete, Shrinkage and Creep of Concrete, SP-227, American Concrete Institute, Detroit, 2005.
  85. Maragakis, E., Saiidi, M., Johnson, R., DesRoches, R., and Padgett, J. (2005), Experimental Evaluation of the Performance of SMA Bridge Restrainers, Proceedings of the Second International Conference on Urban Earthquake Engineering, Tokyo, Japan, March, 2005.
  86. McCormick, J., Barbero, L., and DesRoches, R. (2005). Effects of Mechanical Training on the Properties of Superelastic Shape Memory Alloys for Seismic Applications, Proceedings of the SPIE Annual Conference, San Diego, CA., March 4-7, 2005.
  87. McCormick, J., DesRoches, R., Fuggazza, D., and Auricchio, F. (2005). Seismic Vibration Control Using Superelastic Shape Memory Alloys, Proceedings of the Workshop on Shape Memory Alloys, Composites and Foams, Metz, France, May, 2005.
  88. Punurai, W., Jacobs, L.J., Kurtis, K., and Jarzynski, J., Characterization of the microstructure of cement-based materials using ultrasonic attenuation, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, pp. 1431-1438, Vol. 24B, 2005.
  89. Punurai, W., Jacobs, L.J., Kurtis, K., and Jarzynski, J., Characterization of the microstructure of cement-based materials using ultrasonic attenuation, presented at 31st Annual Review of Progress in Quantitative Nondestructive Evaluation, Golden, Colorado, July 26- 30, 2004, Vol. 24, 2005.
  90. R., Fuggazza, D., and Auricchio, F., and DesRoches, R. (2005) Numerical and Experimental Evaluation of the Damping Properties of Shape Memory Alloys, Proceedings of the Workshop on Shape Memory Alloys, Composites and Foams, Metz, France, May, 2005.
  91. Saber, Aziz; and Kahn, Lawrence F.; Stability of Long-Span Pretensioned High Performance Concrete Girders, Proceedings ACI Symposium on High Performance Concrete, New York, 2005
  92. Swartz, R.A., Jung, D., Lynch, J.P., Wang, Y., Shi, D. and Flynn, M.P. (2005). "Design of a wireless sensor for scalable distributed in-network computation in a structural health monitoring system," Proceedings of the 5th International Workshop on Structural Health Monitoring, Stanford, CA, September 12 - 14, 2005.
  93. Wang, Y., Lynch, J.P. and Law, K.H. (2005). "Design of a low-power wireless structural monitoring system for collaborative computational algorithms," Proceedings of SPIE 10th Annual International Symposium on Nondestructive Evaluation for Health Monitoring and Diagnostics, 5768: 106, San Diego, CA, March 6 - 10, 2005.
  94. Wang, Y., Lynch, J.P. and Law, K.H. (2005). "Validation of an integrated network system for real-time wireless monitoring of civil structures," Proceedings of the 5th International Workshop on Structural Health Monitoring, Stanford, CA, September 12 - 14, 2005.
  95. Wang, Y., Lynch, J.P. and Law, K.H. (2005). "Wireless structural sensors using reliable communication protocols for data acquisition and interrogation," Proceedings of the 23rd International Modal Analysis Conference (IMAC XXIII), Orlando, FL, January 31 - February 3, 2005.
  96. White, D.W. (2005). Unified Approach for the Flexural Stability Design of Steel I-Section Members, Proceedings, Structures Congress, ASCE/SEI.
  97. White, D.W. and Grubb, M.A. (2005). Unified Resistance Equations for Design of Curved and Tangent Steel Bridge I-Girders, TRB 6th International Bridge Engineering Conference, Transportation Research Board, Washington, DC, July, 121-128.
  98. A. Yavari, M. Ortiz and K. Bhattacharya, Atomic structure of ferroelectric domain walls, SIAM Conference on Mathematical Aspects of Materials Science, May 23-26, 2004. Los Angeles.
  99. Alemdar, B.N. and White, D.W. (2004). A Full Nonlinear Three Dimensional Displacement-based Co-rotational Formulation for Beam-Column Finite Elements 6th International Congress on Advances in Civil Engineering, 6-8 October, Bogazici University, Istanbul, Turkey.
  100. Andrawes, B. and DesRoches, R. (2004). Bridge Retrofit Using Cable Restrainers, Proceedings of the ACI Annual Conference, Washington DC., March 3-5, 2004.
  101. Andrawes, B. and DesRoches, R. (2004). Comparison of Different Methods for Seismic Retrofit of Bridges Using Smart Materials, Proceedings of the 13th World Conference in Earthquake Engineering, Vancouver, Canada, August 1-6, 2004, Paper 274.
  102. Blum, F., Jarzynski, J., and Jacobs, L.J., A Focused, Two-dimensional Air Coupled Ultrasonic Array for Non-contact Generation, presented at the 30th Annual Review of Progress in Quantitative Nondestructive Evaluation, Green Bay, Wisconsin, July 27-August 3, 2003, pp. 834-839, Vol. 23A, 2004.
  103. DesRoches, R. (2004). Application of Shape Memory Alloys in Seismic Retrofit of Civil Structures, Proceedings of the Planning Meeting for NEES-Edefense Collaboration, Kobe, Japan, April 4-6, 2004.
  104. DesRoches, R. (2004). Performance of Steel Buildings with Smart Connections, Proceedings of US Korea Smart Structures Conference, Soeul, Korea, September 15-18, 2004.
  105. Distributed Education for Professional Development and Practice"  (2004) ASCE Structures Congress Proceedings, in press.
  106. Griffin, Marvin; Kahn, Lawrence; and Lopez, Mauricio; Deck Contraction Induced Deflection in a High Performance Concrete Bridge, Proceedings PCI National Bridge Conference, Atlanta, Oct.17-20, 2004, pp. 30
  107. Junge, M., Qu, J., Jarzynski, J., LaSaponara, V. and Jacobs, L.J., The Measurement of Residual Stresses using the Polarization of Rayleigh Waves, presented at the 30th Annual Review of Progress in Quantitative Nondestructive Evaluation, Green Bay, Wisconsin, July 27-August 3, 2003, pp. 1187-1191, Vol. 23B, 2004.
  108. Kang, J., Qu, J., Saxena, A. and Jacobs, L.J., On the Detection of Creep Damage in a Directionally Solidified Nickel Base Superalloy using Nonlinear Ultrasound, presented at the 30th Annual Review of Progress in Quantitative Nondestructive Evaluation, Green Bay, Wisconsin, July 27-August 3, 2003, pp. 1248-1255, Vol. 23B, 2004.
  109. Kuchenbecker, G.H., White, D.W. and Surovek-Maleck, A.E. (2004). Simplified Design of Building Frames Using First-Order Analysis and K=1, Annual Technical Session, Structural Stability Research Council, 119-138.
  110. Luangvilai, K., Jacobs, L.J. and Qu, Jianmin, Far-field Decay of Laser-Generated Axisymmetric Lamb Waves, presented at the 30th Annual Review of Progress in Quantitative Nondestructive Evaluation, Green Bay, Wisconsin, July 27-August 3, 2003, pp. 158-164, Vol. 23A, 2004.
  111. Luangvilai, K., Jacobs, L.J., Wilcox, P., Lowe, M.J.S., and Qu, Jianmin, Characterization of Lamb Waves in Absorbing Plates, presented at the 11th Annual International Symposium on Smart Structures and Materials, San Diego, California, March 14-18, 2004, SPIE Proceedings 5394, pp., 2004.
  112. Lynch, J.P., Wang, Y., Sundararajan, A., Law, K.H. and Kiremidjian, A.S. (2004). "Design and development of power-efficient wireless sensing units for structural health monitoring applications," Proceedings of the International Symposium on Earthquake Engineering in the Past and Future Fifty Years, Harbin, China, August 20 - 21, 2004.
  113. Lynch, J.P., Wang, Y., Sundararajan, A., Law, K.H. and Kiremidjian, A.S. (2004). "Wireless sensing for structural health monitoring of civil structures," Proceedings of the International Workshop on Integrated Life-Cycle Management of Infrastructures, Hong Kong, China, December 9 - 11, 2004.
  114. McCormick, J. and DesRoches, R. (2004). Damping Properties of Shape Memory Alloys, Proceedings of ASCE Structures Congress, Nashville, TN., May 23-27, 2004.
  115. McCormick, J. and DesRoches, R. (2004). Effect of Cyclical Modeling Parameters on the Behavior of Shape Memory Alloys for Seismic Response, Proceedings of the SPIE Annual Conference, San Diego, CA., March 3-5, 2004.
  116. Meyer, K. F.; and Kahn, L. F.; Transfer and Development Length of 0.6-inch Strand in High Strength Lightweight Concrete, High Performance Structural Lightweight Concrete, SP-218, (Ed. John Ries and Thomas Holm), American Concrete Institute, Detroit, MI, April 2004, pp. 9-27
  117. Meyer, Karl F., and Kahn, Lawrence, Shear Behavior of Pretensioned Girders Constructed with Slate High Strength Lightweight Concrete, Proceedings PCI National Bridge Conference, Atlanta, Oct.17-20, 2004, pp. 15
  118. Meyer, Karl F., and Kahn, Lawrence, Transfer and Development Length of Pretensioned Girders Constructed with Slate High Strength Lightweight Concrete, Proceedings PCI National Bridge Conference, Atlanta, Oct.17-20, 2004, pp. 16
  119. Muthukumar. S. and DesRoches R. (2004). Evaluation of Impact Models for Seismic Pounding, Proceedings of the 13th World Conference in Earthquake Engineering, Vancouver, Canada, August 1-6, 2004, Paper 235.
  120. Nielson, B. and DesRoches, R. (2004). Analytical Fragility Curves for Typical Bridges, Proceedings of the 4th National Seismic Conference on Bridges and Highways, Memphis, TN., Feb 3-5, 2004.
  121. Nielson, B. and DesRoches, R. (2004). Improved Methodology for Analytical Fragility Curves for Bridges, Proceedings of the Probabilistic Mechanics Conference , July 23-25, 2004.
  122. Nukala, P.K.V.V. and White, D.W. (2004). Three-Dimensional Formulation of a Mixed Corotational Beam Element, Engineering Mechanics Conference, ASCE.
  123. Padgett, J. E., DesRoches, R., and Nielson, B. (2004). Seismic Retrofit of Bridges in Moderate Seismic Zones, Proceedings of the 2nd US-Turkey Workshop on Seismic Design, Retrofit, and Post-Earthquake Evaluation of Highway Bridges, Ankara, Turkey, Sept 20-25, 2004.
  124. Righman, J.E., Barth, K.E., White, D.W., and Yang, L. (2004). Development of Web Slenderness Limits to Assure Compact Steel I-Girder Performance, Annual Proceedings, Structural Stability Research Council, 59-78.
  125. Saiidi, et (2004). Shake Table Tests of SMA Restrainers, MCEER Report.
  126. Taftali, B., Ellingwood, B., and DesRoches, R. (2004). Fragility of Steel Moment Frames with Novel Beam-Column Connections Using Shape Memory Alloys, Proceedings of the Probabilistic Mechanics Conference, July 23-25, 2004.
  127. White, D.W. and Grubb, M.A. (2004). Comprehensive Update to AASHTO LRFD Provisions for Flexural Design of I-Girders, Structures Congress, ASCE.

Reports

  1. Wang, Y. and Law, K.H. (2007). Wireless Sensing and Decentralized Control for Civil Structures: Theory and Implementation, John A. Blume Earthquake Eng. Ctr., Stanford University, Stanford, CA.
  2. Haj-Ali, R. and Popil, R., Infrared-Thermography for Defect Detection of Paperboard and Corrugated Products, International Paper Science and Technology (IPST)- AMRC research report, 2006.
  3. Haj-Ali, R., Composites Affordability Initiative, Nonlinear Elastic Micromodel for Global/Local Finite Element Analysis of Laminated Composite Structures, Research report to Lockheed-Martin Co., 2006.
  4. Popil, R., and Haj-Ali, R., Engineered Packaging and Products, International Paper Science and Technology (IPST)- ERC research report., 2006.
  5. White, D.W. and Kim, Y.-D. (2006). A Prototype Application of the AISC (2005) Stability Analysis and Design Provisions to Metal Building Structural Systems, prepared for Metal Building Manufacturers Association, January, 157 pp.
  6. Andrew D. Mitchell and Lawrence F. Kahn, 2001. "Shear Friction Behavior of High-Strength Concrete", Georgia Department Department of Transportation Project No. 2005, , School of Civil and Envirnomental Engineering, Georgia Institute of Technology, Atlanta, Georgia, - , p.
  7. Zureick, A., Kahn, L.F., and Kim, Y.S., 2002. "Strengthening of Reinforced Concrete Bridge Deck Slabs with Shop-Manufactured Carbon Composite Plates", Structural Engineering, Mechanics and Materials Research Report No. 02-3, , Georgia Department of Transportation Project No. 2005, Georgia Institute of Technology, Atlanta, GA, - , p.
  8. "Investigation of the Structural Design of the D&L Interiors Billboard Structure that Collapsed on August 1, 2002," for Butler, Wooten, Fryhofer, Daughtery & Sullivan, LLP, August 2004.
  9. "Kentucky Dam Bridge - GTSTRUDL Model Verification," for Tennessee Valley Authority and American Consulting Engineers, June 2004.
  10. Aydemir, M., White, D.W. and Jung, S.K. (2004). Shear Strength and Moment Shear Interaction in HPS Hybrid I-Girders, Structural Engineering, Mechanics and Materials Report No. 25, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, GA, April, 203 pp.
  11. Karl F. Meyer and Lawrence F. Kahn, 2001. "Analytical Investigation of Lightweight Concrete for High Strength Precast Prestressed Bridge Girders", Georgia Department of Transportation Project No. 2004, , School of Civil and Envirnomental Engineering, Georgia Institute of Technology, Atlanta, Georgia, - , p.
  12. Karl F. Meyer and Lawrence F. Kahn, 2001. "Annotated Bibliography for High-Strength, Lightweight Prestressed Concrete Bridge Girders", Georgia Department of Transportation Project No. 2004, , School of Civil and Envirnomental Engineering, Georgia Institute of Technology, Atlanta, Georgia, - , p.
  13. Seismic Retrofit of Reinforced Concrete Bridges Using Shape Memory Alloys, ACI Annual Conference, San Francisco, CA., Oct 25-28, 2004.
  14. Seventh Year Report to the National Science Foundation on the Status of the Mid-America Earthquake Center, Vols. I & II, April 2004