Menu

Glaucio H. Paulino

Last Name: 
Paulino
Office Building: 
Mason
Awards: 
Walter L. Huber Civil Engineering Research Prize from the American Society of Civil Engineers
Xerox Award for Faculty Research
Fellow of the Wessex Institute of Great Britain
National Center for Supercomputing Applications Fellow
Burton & Erma Lewis Faculty Scholar
Collins Scholar
Collins Fellow
Finalist paper of the Robert J. Melosh Medal Competition organized by Duke University, Durham, NC.
M.S. degree with honors, PUC-Rio
Office #: 
5142B
Affinity Group / Department: 
Structural Engineering, Mechanics and Materials
Type: 
Faculty
Academic Faculty
Chaired Professors
Education: 
Ph.D., Civil Engineering, Cornell University, 1995
M.S., Theoretical and Applied Mechanics, Cornell University, 1993
M.S., Civil Engineering (with Honors), PUC-Rio, Brazil, 1988
B.S., Civil Engineering, University of Brasilia (UnB), Brazil, 1985
First Name: 
Glaucio
Photo: 
Publications (Proceedings): 
“A probabilistic approach to randomness in geomtric configuration of scalable origami structures.” K. Liu, G.H. Paulino, and P. Gardoni. American Physical Society March Meeting, 2015.
“Miura Tubes and Assemblages: Theory and Applications.” E.T. Filipov, G.H. Paulino, and T. Tachi. American Physical Society March Meeting, 2015.
“Polygonal finite elements for finite elasticity.” H. Chi, C. Talischi, O. Lopez-Pamies, and G.H. Paulino. Society of Engineering Sciences 51st Annual Technical Meeting, 2014.
“Computational homogenization of the debonding of rigid-particle reinforced elastomers: Considering interphases.” D.W. Spring and G.H. Paulino. Society of Engineering Sciences 51st Annual Technical Meeting, 2014.
“Toward optimization of stiffness and flexibility of rigid, flat-foldable origami structures.” E.T. Filipov, T. Tachi, and G.H. Paulino. The 6th International Meeting on Origami in Science, Mathematics and Education (6OSME), 2014.
“Using geometrically, topologically and materially unstructured methods to reduce mesh dependency in dynamic fracture simulations.” D.W. Spring, S.E. Leon, and G.H. Paulino. 17th U.S. National Congress on Theoretical and Applied Mechanics, 2014.
“Geometrical aspects of lateral bracing systems: Where should the optimal brace point be?” T. Zegard W.F. Baker, A. Mazurek, and G.H. Paulino. 2013 Conference of the ASCE Engineering Mechanics Institute, 2013.
“Truss layout optimization embedded in a continuum.” T. Zegard and G.H. Paulino. 12th U.S. National Congress on Computational Mechanics, 2013.
“Topology design of trusses using a Voronoi-based ground structure method.” X. Zhang, S. Maheshwari, A. Ramos Jr.,and G. H. Paulino. 10th World Congress on Structural and Multidisciplinary Optimization, 2013.
“An integrated structural topology optimization framework for the design of high-rise buildings.” L.L. Beghini; W.F. Baker; A. Beghini; G.H. Paulino. 10th World Congress on Structural and Multidisciplinary Optimization, 2013.
“System reliability based topology optimization of structures under stochastic excitations.” J. Chun, J. Song, and G.H. Paulino. 12th U.S. National Congress on Computational Mechanics, 2013.
“System reliability based topology optimization of structures under stochastic excitations.” J. Chun, J. Song, and G.H. Paulino. 11th International Conference on Structural Safety & Reliability, 2013.
“Topology optimization of structures under stochastic excitations.” J. Chun, J. Song, G.H. Paulino. 10th World Congress on Structural and Multidisciplinary Optimization, 2013.
“Polygonal multiresolution topology optimization for structural dynamics.” E.T. Filipov; J.Chun; G.H. Paulino; J. Song. World Congress on Structural and Multidisciplinary Optimization, 2013.
“Topology optimization using polytopes.” A.L. Gain, G.H. Paulino, L. Duarte, I.F.M. Menezes. World Congress on Structural and Multidisciplinary Optimization, 2013.
“Topology design of trusses using a voronoi-based ground structure method.” S. Maheshwari, X. Zhang, A. Ramos Jr, G.H. Paulino. World Congress on Structural and Multidisciplinary Optimization, 2013.
“A general topology optimization framework for polygonal finite element meshes in arbitrary domains.” I.M.F. Menezes, A. Pereira, C. Talischi, G.H. Paulino. World Congress on Structural and Multidisciplinary Optimization, 2013.
“Stable topology optimization using polygonal finite elements.” G.H. Paulino, C. Talischi. World Congress on Structural and Multidisciplinary Optimization, 2013.
"A ground structure approach for topology optimization of nonlinear trusses." A. Ramos Jr, G. H. Paulino. World Congress on Structural and Multidisciplinary Optimization, 2013.
“Topology optimization of structures under stochastic excitations.” J. Chun, J. Song, G.H. Paulino. Joint Conference of the Engineering Mechanics Institute and the 11th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, 2012.
"Design of Structural Braced Frames Using Topology Optimization." L. Stromberg, A. Beghini, W. F. Baker, G. H. Paulino. ASCE Structures Congress, 2012.
"Identification of mode-I cohesive zone parameters of Al/epoxy T-peel joints with laser treated substrates." M. Alfano, F. Furgiuele, G. Lubineau, G. H. Paulino, COHMAS-KAUST, Technical Report (TR2/2011).
"Study on the role of laser surface irradiation on damage and decohesion of Al/epoxy bonded joints." M. Alfano, F. Furgiuele, G. Lubineau, G. H. Paulino, COHMAS-KAUST, Technical Report (TR4/2011).
"Simulation of debonding in Al/epoxy T-peel joints using a potential based cohesive zone model. " M. Alfano, G. Lubineau, F. Furgiuele, G.H. Paulino. International conference on the mechanical behavior of materials, 2011.
"Identification of fracture parameters for a cohesive zone model using Digital Image Correlation." M. Alfano; G. Lubineau; A. Moussawi and G.H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"On Dynamic Stability Evaluation of Functionally Graded Risers." C. A. De Almeida, G.H. Paulino, I.F.M. Menezes, J. Romero. 11th US National Congress on Computational Mechanics, 2011.
"On The Modeling of Structural Dynamics of Risers Composed of Functionally Graded Materials." C. A. De Almeida, J. C. Romero, I.F.M. Menezes, and G.H. Paulino. XIV International Symposium on Dynamic Problems of Mechanics, 2011.
"Disk-shaped Compact Tension Test for Plain Concrete. " A. Amirkhanian, D. Spring, J. Roessler, K. Park, G.H. Paulino. ASCE: TD&I Congress, 2011.
"A New Frontier in Modern Architecture : Optimal Structural Topologies." A. Beghini, L.L. Stromberg, W. F. Baker, G. H. Paulino, A. Mazurek. International Association for Shell and Spatial Structures, 2011.
"Topology Optimization for Millifluidics." M. S. Carvalho, I. F. M. Menezes, A. Pereira, G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"GPU-Based Fracture, Microbranching and Fragmentation." W. Celes, G. H. Paulino ; A. A. Monteiro. 11th US National Congress on Computational Mechanics, 2011.
"Grain Boundary Decohesion and Particle-Matrix Debonding in Aluminum Alloy 7075-T651 using the PPR Potential-Based Cohesive Model." A. R. Cerrone, G. Heber, S. T. Dacek, P. Wawrzynek, G. H. Paulino ; A. R. Ingraffea. 11th US National Congress on Computational Mechanics, 2011.
"Well-Posedness Issues in Finding Topological Derivatives." Y.-S. Chan, G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"Topology Optimization of Structures under Random Vibrations." J. Chun ; J. Song ; G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"Thermal Cracking Prediction Model and Software for Asphalt Pavements. " E. V. Dave, S. E. Leon, K. Park. ASCE: T&DI Congress, 2011.
"Viscoelastic Functionally Graded Finite Element Method Using Recursive Time Integration with Applications to Thin Bonded Asphalt Overlays." E. V. Dave, G. H. Paulino, W. G. Buttlar, S. G. Ahmed. 11th US National Congress on Computational Mechanics, 2011.
"Topology Optimization using Phase Field Method and Polygonal Finite Elements. " A. L. Gain, G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"Tailoring Topology Optimization to Composite Pressure Vessel Design with Simultaneous Consideration of Fiber Angle and Material Distribution." C. Y. Kiyono ; E. Q. Andrade ; G. H. Paulino ; E. C. N. Silva. 11th US National Congress on Computational Mechanics, 2011.
"A Unified Library of Nonlinear Solution Schemes." S. E. Leon, G. H. Paulino, I. F. M. Menezes, A. Pereira, E. N. Lages. 11th US National Congress on Computational Mechanics, 2011.
"PolyTop: A Matlab Implementation of a General Topology Optimization Framework Using Unstructured Polygonal Finite Element Meshes." I. F. M. Menezes ; C. Talischi ; A. Pereira ; G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"Single-loop System Reliability-Based Topology Optimization Accounting for Statistical Dependence between Multiple Limit-States." T. H. Nguyen, J. Song, and G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"On Fatigue Crack Growth Using Cohesive Zone Model. " K. Park, G. H. Paulino, Robert H. Dodds. 11th US National Congress on Computational Mechanics, 2011.
"Cohesive Zone Modeling of Dynamic Fracture: An Adaptive Mesh Refinement and Coarsening Strategy." G. H. Paulino, K. Park, W. Celes, R. Espinha. 11th US National Congress on Computational Mechanics, 2011.
"An efficient and compact MATLAB implementation of topology optimization: Application to compliant mechanisms. " A. Pereira, I.F.M. Menezes, C. Talischi, and G.H. Paulino. XXXII Iberian Latin-American Congress on Computational Methods in Engineering, 2011.
"PolyMesher: A General-Purpose Mesh Generator for Polygonal Elements Written in Matlab." A. Pereira ; C. Talischi ; I. F. M. Menezes ; G. H Paulino. 11th US National Congress on Computational Mechanics, 2011.
"Toward Group Optimization for the Practical Design of Building Systems." L. L. Stromberg, A. Beghini, W. F. Baker, G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"Biomedical Design of Segmental Bone Replacements for Craniofacial Reconstruction." A. Sutradhar, G. H. Paulino, M. J. Miller, T. H. Nguyen. 11th US National Congress on Computational Mechanics, 2011.
"On restriction methods for two-phase optimal shape problems." C. Talischi, G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"GPU-Based Topology Optimization on Unstructured Meshes." T. Zegard, G. H. Paulino. 11th US National Congress on Computational Mechanics, 2011.
"Checkerboard-free topology optimization using polygonal finite elements." A. Pereira, C. Talischi, I. F. M. Menezes, and G. H. Paulino. CILAMCE, 2010.
"Multilevel preconditioners for simulations and optimization on dynamic, adaptive meshes." E. de Sturler, G. H. Paulino, S. Wang. IV European Conference on Computational Mechanics, 2010.
"Framework for Consideration of Aging and Thermal Gradients in Asphalt Concrete Pavement Simulations." E. V. Dave W. G. Buttlar G. H. Paulino. 10th US National Congress on Computational Mechanics, 2009.
"ParTopS: Compact Topological Framework for Parallel Fragmentation Simulations." R. Espinha, W. Celes, N. Rodriguez, G. H. Paulino. 10th US National Congress on Computational Mechanics, 2009.
"Extraction of Cohesive Properties of Elasto-Plastic material using Inverse Analysis." A. Gain, J. Carroll, G. H. Paulino, J. Lambros. 10th US National Congress on Computational Mechanics, 2009.
"Investigation of Low Temperature Cracking through an Improved Thermal Cracking Model." S. Leon, G. H. Paulino, W. G. Buttlar. 10th US National Congress on Computational Mechanics, 2009.
"Single-loop System Reliability-Based Design & Topology Optimization (SRBDO/SRBTO): A Matrix-based System Reliability (MSR) Method" T.H. Nguyen, J. Song, G.H. and Paulino. 10th US National Congress on Computational Mechanics, 2009.
“Single-Loop System Reliability-Based Design Optimization (SRBDO) Using Matrix-based System Reliability (MSR) Method” T.H. Nguyen, J. Song, G.H. and Paulino. Proceeding of The 10th International Conference on Structural Safety and Reliability (ICOSSAR10), September 13-17, Osaka, Japan. pp 1534-1541, 2009.
"Potential-Based Dynamic Fracture Simulation with Adaptive Topological Operators." K. Park, G.H. Paulino, W. Celes, R. Espinha. 10th US National Congress on Computational Mechanics, 2009.
"Direct Extraction of Cohesive Zone Model Parameters through Inverse Techniques." B. Shen and G. H. Paulino. 10th US National Congress on Computational Mechanics, 2009.
"Pattern Gradation and Repetition with Application to High-Rise Building Design." L. Stromberg, G. H. Paulino, W. F. Baker. 10th US National Congress on Computational Mechanics, 2009.
"Topological embedding using a multilevel mesh representation for topology optimization." C. Talischi, G. H. Paulino, R. Espinha, A. Pereira, I. F. M. Menezes, W. Celes. 10th US National Congress on Computational Mechanics, 2009.
"Topology Optimization with Polygonal Finite Elements." C. Talischi, G. H. Paulino, A. Pereira, I. F. M. Menezes. 8th World Congress on Structural and Multidisciplinary Optimization, 2009.
"Large deflection analysis of planar solids based on the Finite Particle Method." Y. Yu, Y. Luo, and G. H. Paulino. 10th US National Congress on Computational Mechanics, 2009.
“Analysis of Creep Properties using a Flattened Indirect Tension Test for Asphalt Concrete.” A. F. Braham, E. V. Dave, W. G. Buttlar and G. H. Paulino. Proceedings of the Eighth International Conference on Creep, Shrinkage and Durability of Concrete and Concrete Structures, CRC Press Taylor and Francis Group, London, ISBN: 978-0-415-48508-1, pp 787-792, 2008.
"Creep Compliance Analysis Technique for the Flattened Indirect Tension Test of Asphalt Concrete." E.V. Dave, A.F. Braham, W.G. Buttlar, G.H. Paulino. 8th International Conference on Creep, Shrinkage and Durability of Concrete and Concrete Structures, 2008.
“Integration of Laboratory Testing, Field Performance Data, and Numerical Simulations for the Study of Low-Temperature Cracking.” E.V. Dave, A.F. Braham, W.G. Buttlar, G.H. Paulino, and Adam Zofka. Proceedings of the 6th RILEM International Conference on Cracking in Pavements, Chicago, USA, Eds. Al-Qadi, Scarpas, and Loizos, CRC Press Taylor and Francis Group, New York, ISBN: 978-0-415-4757-54, pp.369-378, 2008.
“Asphalt Pavement Aging and Temperature Dependent Properties through a Functionally Graded Viscoelastic Model, Part-I: Development, Implementation and Verification.” E.V. Dave, G.H. Paulino, W.G. Buttlar. Proceedings of the Multiscale, Multifunctional, and Functionally Graded Materials Conference (FGM2008).
“Asphalt Pavement Aging and Temperature Dependent Properties through a Functionally Graded Viscoelastic Model, Part-II: Applications.” E.V. Dave, G.H. Paulino, W.G. Buttlar. Proceedings of the Multiscale, Multifunctional, and Functionally Graded Materials Conference (FGM2008).
“Embedding of Superelements for Three-Dimensional Topology Optimization.” G.H. Paulino, A. Pereira, C. Talischi, I.F.M. Menezes. Proceedings of Iberian Latin American Congress on Computational Methods in Engineering, 2008.
"Wachspress Elements for Topology Optimization." C. Talischi, G. H. Paulino, and C. Le. 6th International Conference on Computation of Shell and Spatial Structures IASS-IACM 2008: “Spanning Nano to Mega”.
"Topology Optimization with Wachspress and Voronoi Finite Elements." C. Talischi, A. Pereiray, I. F. M. Menezesz, G. H. Paulino. EngOpt 2008 - International Conference on Engineering Optimization, 2008.
"Cohesive Zone Modeling of Mode I Fracture in Adhesive Bonded Joints." M. Alfano, F. Furgiuele, A. Leonardi, C. Maletta and G. H. Paulino. Fracture and Damage Mechanics VI, 2007.
"Fracture Analysis Of Adhesive Joints Using Intrinsic Cohesive Zone Models." M. Alfano, F. Furgiuele, A. Leonardi, C. Maletta, G. H. Paulino. IGF, 2007.
"Piezoactuator Design Considering the Optimum Placement of FGM Piezoelectric Material." R. C. Carbonari, S. Nishiwaki, Glaucio H. Paulino, and E. C. N. Silva. Modeling, Signal Processing, and Control for Smart Structures, 2007.
“Development of a Flattened Indirect Tension Test for Asphalt Concrete.” E.V. Dave, A.F. Braham, W.G. Buttlar, and G.H. Paulino. Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Springfield, MA, Vol. 2, pp. 1088-1097, 2007.
“Reflective and Thermal Cracking Modeling of Asphalt Concrete Overlays.” E.V. Dave, S.H. Song, W.G. Buttlar, and G.H. Paulino. International Conference of Advanced Characterisation of Pavement and Soil Engineering Materials, Athens, Greece. Vol. 1, ISBN 978-0-415-44882-6, Taylor & Francis Group, London, pp. 1241-1252, 2007.
"Inverse Computation of Mode I Cohesive Properties from Displacement Field." B. Shen and G. H. Paulino. 9th US National Congress on Computational Mechanics, 2007.
"Design of Functionally Graded Piezoelectric Actuators Using Topology Optimization." R. C. Carbonari, E. C. N. Silva, and G. H. Paulino. Smart Structures and Materials 2006: Modeling, Signal Processing, and Control.
"Multi-actuated Functionally Graded Piezoelectric Micro-Tools Design Using Topology Optimization." R. C. Carbonari, E. C. N. Silva, and G. H. Paulino. Smart Structures and Materials 2006: Modeling, Signal Processing, and Control.
"Topology Optimization Applied to the Design of Functionally Graded Piezoelectric Bimorph." R. C. Carbonari, E. C. N. Silva, and G. H. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Fabrication of Functionally Graded-cellular Structures of Cement-based Materials by Coextrusion." Y. Chen, L. J. Struble, G. H. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Graded Viscoelastic Approach for Modeling Asphalt Concrete Pavements." E. V. Dave, W. G. Buttlar, G. H. Paulino and H. H. Hilton. Multiscale and Functionally Graded Materials, 2006
"Large Scale Topology Optimization Using Preconditioned Krylov Subspace Recycling and Continuous Approximation of Material Distribution." E. de Sturler, C. Le, S. Wang, G. H. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Probabilistic Fracture Analysis of Functionally Graded Materials - Part II: Implementation and Numerical Examples." T. H. Nguyen, J. Song, and G. H. Paulino. Multiscale and Functionally Graded Materials, 2006
"Concrete Fracture Prediction Using Virtual Internal Bond Model with Modified Morse Functional Potential." K. Park, G. H. Paulino and J. R. Roesler. Multiscale and Functionally Graded Materials, 2006
"Micromechanics-Based Interfacial Debonding Model of Functionally Graded Materials." G. H. Paulino, H. M. Yin, and L. Z. Sun. Multiscale and Functionally Graded Materials, 2006
"Dynamic Failure, Branching and Fragmentation Using Cohesive Zone Modeling." G. H. Paulino, Z. Zhang, and W. Celes. IGF 2006.
"Fracture Behavior and Properties of Functionally Graded Fiber-Reinforced Concrete." J. Roesler, A. Bordelon, C. Gaedicke, K. Park, and G. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Manufacturing and Mechanical Testing of a New Functionally Graded Fiber Reinforced Cement Composite." B. Shen, M. Hubler, G. H. Paulino and L. J. Struble. Multiscale and Functionally Graded Materials, 2006.
"Modeling Bamboo as a Functionally Graded Material." E. C. N. Silva, M. C. Walters and G. H. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Influence of the Cohesive Zone Model Shape Parameter on Asphalt Concrete Fracture Behavior." S. H. Song, G. H. Paulino and W. G. Buttlar. Multiscale and Functionally Graded Materials, 2006.
"Investigation of Dynamic Fracture Behavior in Functionally Graded Materials Using the Interaction Integral Method." S. H. Song and G. H. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Probabilistic Fracture Analysis of Functionally Graded Materials - Part I: Uncertainty and Probabilistic Analysis Method." J. Song, T. H. Nguyen and G. H. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Topology Optimization with Stress Constraints: Reduction of Stress Concentration in Functionally Graded Structures." F. V. Stump, E. C. N. Silva, G. H. Paulino. Multiscale and Functionally Graded Materials, 2006.
"Topology Optimization Using Wachspress-Type Interpolation with Hexagonal Elements." C. Talischi, G. H. Paulino, C. H. Le. Multiscale and Functionally Graded Materials, 2006.
"Effective Elasticity of Functionally Graded Composites: A Micromechanics Framework with Particle Interactions." H.M. Yin, G. H. Paulino, and L.Z. Sun. Multiscale and Functionally Graded Materials, 2006.
"Effective Thermal Conductivity of Graded Nanocomposites with Interfacial Thermal Resistance." H.M. Yin, G. H. Paulino, W.G. Buttlar, and L.Z. Sun. Multiscale and Functionally Graded Materials, 2006.
"Cohesive Modeling of Dynamic Crack Growth in Homogeneous and Functionally Graded Materials." Z. Zhang, G. H. Paulino and W. Celes. Multiscale and Functionally Graded Materials, 2006.
"Cohesive Modeling Of Propogating Cracks In Homogeneous and Functionally Graded Composites." G. H. Paulino and Z. Zhang. 5th GRACM International Congress on Computational Mechanics, 2005.
"Development of a single-edge notched beam test for the study of asphalt concrete fracture." M. P. Wagoner, W. G. Buttlar and G.H. Paulino. Proceedings of the ASCE Geo-Frontier Conference, 2005.
"Investigation of the Fracture Resistance of Hot-Mix Asphalt Concrete Using a Disk-Shaped Compact Tension Test." M. P. Wagoner, W. G. Buttlar, G. H. Paulino, and P. Blankenship. Transportation Research Record: Journal of the Transportation Research Board, No. 1929, Transportation Research Board of the National Academies, Washington, D.C., 2005, pp. 183–192.
"The simple boundary element method for transient heat conduction in functionally graded materials." G. H. Paulino and A. Sutradhar. Proceedings of the International Association for Boundary Element Methods, IABEM 2004, CD-ROM; Minneapolis, MN, USA, May 24-26, 2004.
"Cohesive zone modeling of fracture in asphalt concrete." G. H. Paulino, S. H. Song, and W. G. Buttlar. Proceedings of the Fifth RILEM Conference, Limoges, France, April, 2004.
"Symmetric Galerkin boundary element computation of T-stress and stress intensity factors for mixed-mode cracks by the interaction integral method." A. Sutradhar and G. H. Paulino Proceedings of the International Association for Boundary Element Methods, IABEM 2004, CD-ROM; Minneapolis, MN, USA, May 24-26, 2004.
"Application of graded finite elements for asphalt pavement analysis." W. G. Buttlar, G. H. Paulino and S. H. Song. Proceedings of the Second MIT Conference on Computational Fluid and Solid Mechanics, Editor: K. J. Bathe, Cambridge, MA, June 17-20, 2003.
"Stress Intensity Factors and T-stress in Functionally Graded Materials: A Unified Approach Using the Interaction Integral Method." J.-H. Kim and G. H. Paulino. Proceedings of the Second MIT Conference on Computational Fluid and Solid Mechanics, Volume I: pages 381-386, Editor: K. J. Bathe, Cambridge, MA, June 17-20, 2003.
"Boundary element methods for functionally graded materials." G. H. Paulino, A. Sutradhar and L. J. Gray. Boundary Element Technology XV, pages 137-146, Editors: C. A. Brebbia, R. E. Dipery WIT Press, 2003.
"The hybrid boundary element method applied to functionally graded materials." N. A. Dumont, R. A. P. Chaves and G. H. Paulino. Proceedings of Boundary Elements XXIV, Series: Advances in Boundary Elements, Vol.13, Editors: C. A. Brebbia, A. Tadeu and V. Popov, June 17 - 19, Sintra, Portugal, 2002.
"Coupling of the Meshfree Finite Cloud Method with the Standard Boundary Element Method." G. Li, G. Paulino, N.R. Aluru. Proceedings of the International Association for Boundary Element Methods, IABEM 2002, CD-ROM; Austin, Texas, USA, May 28-30, 2002.
"A novel frictionless contact formulation and implementation using the boundary element method." S. Maiti, G.H. Paulino, P.H. Geubelle. Proceedings of the International Association for Boundary Element Methods, IABEM 2002, CD-ROM; Austin, Texas, USA, May 28-30, 2002.
"Boundary Element Methods for Functionally Graded Materials." G. Paulino, A. Sutradhar, L. J. Gray. Proceedings of the International Association for Boundary Element Methods, IABEM 2002, CD-ROM; Austin, Texas, USA, May 28-30, 2002.
"Three-dimensional transient heat conduction in functionally graded materials." A. Sutradhar, G. H. Paulino and L. J. Gray. Proceedings of the International Association for Boundary Element Methods, IABEM 2002, CD-ROM; Austin, Texas, USA, May 28-30, 2002.
"Application of the hybrid boundary element method to functionally graded materials: problems of potential." N. A. Dumont, R. A. P. Chaves and G. H. Paulino. 22nd Iberian Latin-American Congress on Computational Methods in Engineering, CILAMCE 2001, 20 pages in CD, Campinas, Brazil, 2001.
"Modeling of functionally graded material assemblages using the hybrid boundary element method." N. A. Dumont, R. A. P. Chaves and G. H. Paulino. Computational Mechanics - New Frontiers for the Millenium, Vol.2, pp.1019-1024, 2001. Editors: S. Valliappan and N. Khalili, Proceedings of the First Asian-Paci c Congress on Computational Mechanics, November 20-23, 2001, Sydney, N.S.W., Australia.
"Gradient elasticity theory for mode I crack in functionally graded materials." Y.-S. Chan, A. C. Fannjiang and G. H. Paulino. Ceramic Transactions, Vol.114, pp.731-738, 2001. Editors: K. Trumble, K. Bowman, I. Reimanis and S. Sampath, The American Ceramic Society, Proceedings of the 6th International Symposium on Functionally Graded Materials, FGM2000, September 10-14, 2000, Colorado, USA.
"Synthesis and densification of ceramic FGMs in one step." E. M. Carrillo-Heian, J. C. Gibeling, Z. A. Munir and G. H. Paulino. Ceramic Transactions, Vol.114, pp.241-248, 2001. Editors: K. Trumble, K. Bowman, I. Reimanis and S. Sampath, The American Ceramic Society, Proceedings of the 6th International Symposium on Functionally Graded Materials, FGM2000, September 10-14, 2000, Colorado, USA.
"Boundary integral analysis for functionally graded materials." L. J. Gray, T. Kaplan, J. D. Richardson and G. H. Paulino. Ceramic Transactions, Vol.114, pp.501-511, 2001. Editors: K. Trumble, K. Bowman, I. Reimanis and S. Sampath, The American Ceramic Society, Proceedings of the 6th International Symposium on Functionally Graded Materials, FGM2000, September 10-14, 2000, Colorado, USA.
"Transient thermal stress analysis of cracked functionally graded materials." Z.-H. Jin and G. H. Paulino. Ceramic Transactions, Vol.114, pp.747-754, 2001. Editors: K. Trumble, K. Bowman, I. Reimanis and S. Sampath, The American Ceramic Society, Proceedings of the 6th International Symposium on Functionally Graded Materials, FGM2000, September 10-14, 2000, Colorado, USA.
"Fracture mechanics of viscoelastic functionally graded materials." G. H. Paulino and Z.-H. Jin. Ceramic Transactions, Vol.114, pp.715-722, 2001. Editors: K. Trumble, K. Bowman, I. Reimanis and S. Sampath, The American Ceramic Society, Proceedings of the 6th International Symposium on Functionally Graded Materials, FGM2000, September 10-14, 2000, Colorado, USA.
"A methodology for self-adaptive nite element analysis using an object oriented approach." J. B. Cavalcante Neto, L. F. Martha, I. F. M. Menezes and G. H. Paulino. Fourth World Congress on Computational Mechanics, 20 pages, 1998, Argentina.
"Validation of site characterization method for the study of dynamic pore pressure response." K. Sivathasan, G. H. Paulino, X. S. Li and K. Arulanandan Geotechnical Earthquake Engineering and Soil Dynamics III, Vol.1, pp.469-481,1998. Editors: P. Dakoulas, M. Yegian and R.D. Holtz, ASCE, Proceedings of a Specialty Conference, August 3-6, 1998, University of Washington, Seattle, WA.
"On the expansion for surface displacement in the neighborhood of a crack tip." L. J. Gray and G. H. Paulino. Computational Mechanics'95, Vol.2, pp.2896-2901, 1995. Editors: S. N. Atluri, G. Yagawa and T. A. Cruse, Proceedings of the International Conference on Computational Engineering Science, July 30-August 3, 1995, Hawaii.
"Estimation of concrete resistance at 28 days through nondestructive experiments performed at rst days." M. R. Silva and G. H. Paulino. (in Spanish), Memorias "A" Tecnologia de Materiales, Tomo 1, pp.61-80; 7a. Reunion Tecnica Argentina de Tecnologia del Hormigon and 1er. Simposio Glarilen sobre Tecnologia de Materiales, COLLOQUIA 85, 7-11 October, 1985, Buenos Aires, Argentina.
Job Title: 
Raymond Allen Jones Chair & Professor
Research Interests: 
Polygonal Finite Elements: Application to Structural Topology Optimization
Reliability Based Design and Topology Optimization
Topology Optimization Applied to Design of High-Rise Buildings
Multiresolution Topology Optimization (MTOP)
Implicit Function Methods for Topology Optimization
GPU Accelerated Topology Optimization on Unstructured Meshes
PPR: Potential-Based Cohesive Model
Adaptive Mesh Refinement and Coarsening for Dynamic Cohesive Fracture
Extraction of Cohesive Fracture Parameters using Digital Image Correlation Techniques and Inverse Analysis
Unified Library of Nonlinear Solution Schemes
Functionally graded concrete for the civil infrastructure - A multifunctional material system approach
Topological Data Structure (TopS) for Finite Element Mesh Representation
ParTopS & Multi-level TopS: Parallel and Multiple Level Topological Framework
Publications (Articles): 
"Topology Optimization Using Polytopes" A.L. Gain, G.H. Paulino, L.S. Duarte, and I.F.M. Menezes. Computer Methods in Applied Mechanics and Engineering. Available Online. DOI 10.1016/j.cma.2015.05.007
"PolyTop++: an efficient alternative for serial and parallel topology optimization on CPUs & GPUs." L. S. Duarte, W. Celes, A. Pereira, I. F. M. Menezes, G. H. Paulino. Journal of Structural and Multidisciplinary Optimization. Available Online. DOI 10.1007/s00158-015-1252-x
"Bridging art and engineering using Escher-based virtual elements." G. H. Paulino and A. L. Gain. Journal of Structural and Multidisciplinary Optimization. Available Online. DOI 10.1007/s00158-014-1179-7.
"Forward and inverse analysis of concrete fracture using the disk-shaped compact tension test." A. N. Amirkhanian, D. W. Spring, J. R. Roesler, and G. H. Paulino. Journal of Testing and Evaluation. Under Review.
"On small deformation interfacial debonding in composite materials containing multi-coated particles." R. Hashemi, D. W. Spring, and G. H. Paulino. Journal of Composite Materials. Published Online 2015. DOI 10.1177/0021998314565431.
"Polygonal Multiresolution Topology Optimization (PolyMTOP) for Structural Dynamics." E. T. Filipov, Junho Chun, G. H. Paulino, J. Song. Journal of Structural and Multidisciplinary Optimization. Accepted. DOI 10.1007/s00158-014-1211-y
"Fluid Flow Topology Optimization in PolyTop: Stability and Computational Implementation." A. Pereira, C. Talischi, G. H. Paulino, I. F. M. Menezes, M. S. Carvalho. Journal of Structural and Multidisciplinary Optimization. Accepted. DOI 10.1007/s00158-014-1182-z
"Filled elastomers: A theory of filler reinforcement based on hydrodynamic and iterphasial effects." T. Goudarzi, D. W. Spring, G. H. Paulino, and O. Lopez-Pamies. Journal of the Mechanics and Physics of Solids. Vol. 80, pp. 37-67. 2015.
"Parameter sensitivity of system reliability using sequential compounding method." J. Chun, J. Song, and G. H. Paulino. Structural Safety. Vol 55. pp. 26-36. 2015.
"Gradient correction for polygonal and polyhedral finite elements." C. Talischi, A. Pereira, I.F. Menezes, and G. H. Paulino. International Journal for Numerical Methods in Engineering. Vol 102. pp. 728-747. 2015.
"Special Issue Computational and Experimental Mechanics of Advanced Materials Preface." M. Alfano, G. Lubineau, and G. H. Paulino. International Journal of Solids and Structures. Vol. 55, pp. 1-1, 2015.
"Global sensitivity analysis in the identification of cohesive models using full-field kinematic data." M. Alfano, G. Lubineau, and G. H. Paulino. International Journal of Solids and Structures. Vol. 55, pp. 66-78, 2015.
"Convex topology optimization for hyperelastic trusses based on the ground-structure approach." A. S. Ramos Jr. and G. H. Paulino. Journal of Structural and Multidisciplinary Optimization. Vol. 51, No. 2, pp. 287-304, 2015.
"A closer look at consistent operator splitting and its extensions for topology optimization" C.Talischi and G.H. Paulino. Computer Methods in Applied Mechanics and Engineering. Vol 283. pp. 573-598. 2015.
"Polygonal finite elements for finite elasticity." H. Chi, C. Talischi, O. Lopez-Pamies, and G. H. Paulino. International Journal of Numerical Methods in Engineering. Vol. 101, pp. 305-328. 2015.
"Reduction in mesh bias for dynamic fracture using adaptive splitting of polygonal finite elements." S. E. Leon, D. Spring and G.H. Paulino. International Journal of Numerical Methods in Engineering. Vol 100. pp. 555-576. 2014.
"On the Virtual Element Method for three-dimensional linear elasticity problems on arbitrary polyhedral meshes" A. L. Gain, C. Talischi, and G.H. Paulino. Computer Methods in Applied Mechanics and Engineering. Vol 282. pp. 132-160. 2014.
"GRAND — Ground structure based topology optimization for arbitrary 2D domains using MATLAB" T. Zegard and G.H. Paulino. Journal of Structural and Multidisciplinary Optimization. Vol 50. No. 5. pp. 861-882. 2014.
"Unstructured Polygonal Meshes with Adaptive Refinement for the Numerical Simulation of Dynamic Cohesive Fracture." D. Spring, S. E. Leon, and G.H. Paulino. International Journal of Fracture. Vol 189. pp. 33-57. 2014.
"Maximizing Phononic Band Gaps in Piezocomposite Materials by Means of Topology Optimization" S. Vatanabe, G.H. Paulino, and E. C. N. Silva. Journal of the Acoustical Society of America. Vol 136. pp. 494-501. 2014.
"A growing library of three-dimensional cohesive elements for use in ABAQUS." D. Spring and G.H. Paulino. Engineering Fracture Mechanics. Vol 126. pp. 190-216. 2014.
"Geometrical aspects of lateral bracing systems: Where should the optimal bracing point be?" T. Zegard, W. Baker, A. Mazurek, and G.H. Paulino. ASCE Journal of Structural Engineering. Vol 140, No. 9, 04014063-1 to 9. 2014.
"A three-dimensional multilayered pipe beam element: Nonlinear analysis." L.L. Aguiar, C.A. Almeida, and G.H. Paulino. Computers and Structures. Vol 138. pp. 142-161. 2014.
"Connecting architecture and engineering through structural topology optimization." L.L . Beghini, A. Beghini, N. Katz, W. F. Baker, and G. H. Paulino. Engineering Structures. Vol 59. pp. 716-726. 2014.
"An object-oriented framework for finite element analysis based on a compact topological data structure". L. L. Beghini, A. Pereira, R. Espinha, I. F. M. Menezes, W. Celes, and G. H. Paulino. Advances in Engineering Software. Vol. 68, pp. 40-48, Feb. 2014.
"Implementation and verification of the Park–Paulino–Roesler cohesive zone model in 3D". A. Cerrone, Paul Wawrzynek, G.H. Paulino, and A. Ingraffea. Engineering Fracture Mechnics. Vol 120, pp 26-42, April 2014.
"On the effect of constraint parameters on the generalized displacement control method". S. E. Leon, E. N. Lages, C. N. de Araujo and G. H. Paulino. Mechanics Research Communications. Vol. 56, pp. 153-159, 2014.
"Polygonal Finite Elements for Incompressible Fluid Flow". C. Talischi, A. Pereira, G. H. Paulino, I. F. M. Menezes and Marcio S. Carvalho. International Journal for Numerical Methods in Fluids. Vol. 74, No. 2, pp. 134-151, 2014.
"Addressing integration error for polygonal finite elements through polynomial projections: A patch test connection". C. Talischi, G. H. Paulino. Mathematical Models and Methods in Applied Sciences. Vol. 24, No. 8, pp. 1701-1727, 2014.
"IlliTC – low-temperature cracking model for asphalt pavements". E. Dave, W. G. Buttlar, S. E. Leon, B. Behnia, and G.H. Paulino. Road Materials and Pavement Design. Vol. 14, No. S2, pp 57-78, 2013.
"Scalable parallel dynamic fracture simulation using an extrinsic cohesive zone model". R. Espinha, K. Park, G.H. Paulino, W. Celes. Computer Methods in Applied Mechanics and Engineering. Vol. 266, pp 144-161, 2013.
"A critical comparative assessment of differential equation-driven methods for structural topology optimization". A. L. Gain and G.H. Paulino. Journal of Structural and Multidisciplinary Optimization. Vol. 48, No. 4, pp. 685-710, 2013.
"A Splitting Algorithm for Tikhonov-Regularized Topology Optimization". C. Talischi and G.H. Paulino. Computer Methods in Applied Mechanics and Engineering. Vol. 253, No. 1, pp. 599-608, 2013.
"Design of functionally graded piezocomposites using topology optimization and homogenization – Toward effective energy harvesting materials". S.L. Vatanabe, G.H. Paulino, E.C.N. Silva. Computer Methods in Applied Mechanics and Engineering. Vol. 266, No. 1, pp. 205-218, 2013.
"Toward GPU accelerated topology optimization on unstructured meshes". T. Zegard and G.H. Paulino. Journal of Structural and Multidisciplinary Optimization. Vol. 48, No. 3, pp. 473-485, 2013.
"Truss layout optimization within a continuum". T. Zegard and G.H. Paulino. Journal of Structural and Multidisciplinary Optimization. Vol. 48, No. 1, pp. 1-16, 2013.
"Study on the role of laser surface irradiation on damage and decohesion of Al/epoxy joints". M. Alfano, G. Lubineau, F. Furgiuele, and G.H. Paulino. International Journal of Adhesion and Adhesives. Vol. 39, pp 33-41, 2012.
"Viscoelastic functionally graded finite element method with recursive time integration and applications to flexible pavements". E.V. Dave, G.H. Paulino, and W.G. Buttlar. International Journal for Numerical and Analytical Methods in Geomechanics. Vol. 36, No. 9, pp. 1194-1219, 2012.
"Phase-field based topology optimization with polygonal elements: a finite volume approach for the evolution equation." A.L. Gain, G.H. Paulino. Journal of Structural and Multidisciplinary Optimization. Vol. 46, No. 3, pp. 327-342, 2012.
"Improving multiresolution topology optimization via multiple discretizations." T.H. Nguyen, G.H. Paulino, J. Song, and C.H. Le. International Journal for Numerical Methods in Engineering. Vol. 92, No 6, pp. 507-530, 2012.
"Computational Implementation of the PPR Potential-based Cohesive Model in ABAQUS: Educational Perspective." K. Park and G.H. Paulino. Engineering Fracture Mechanics. Vol. 93, pp. 239-262, 2012.
"Adaptive mesh refinement and coarsening for cohesive dynamic fracture". K. Park, G.H. Paulino, W. Celes, and R. Espinha. International Journal for Numerical Methods in Engineering. Vol. 92, No. 1, pp. 1-35, 2012.
"Analysis, manufacture and characterization of Ni/Cu functionally graded structures." W.M. Rubio, G. H. Paulino, and E. N. C. Silva. Materials and Design. Vol 41. pp. 255-265. 2012.
"Topology Optimization for Braced Frames: Combining Continuum and Discrete Elements." L.L . Stromberg, A. Beghini, W. F. Baker, and G. H. Paulino. Engineering Structures. Vol 37. pp. 106-124. 2012.
"PolyMesher: A general-purpose mesh generator for polygonal elements written in Matlab." C. Talischi, G.H. Paulino, A. Pereira, I.F.M. Menezes. Journal of Structural and Multidisciplinary Optimization. Vol. 45, No. 3, pp. 309-328, 2012.
"PolyTop: a Matlab implementation of a general topology optimization framework using unstructured polygonal finite element meshes." C. Talischi, G.H. Paulino, A. Pereira, I.F.M. Menezes. Journal of Structural and Multidisciplinary Optimization. Vol. 45, No. 3, pp. 329-357, 2012.
"Influence of pattern gradation on the design of piezocomposite energy harvesting devices using topology optimization." S.L. Vatanabe, G.H. Paulino, and E.C.N. Silva. Composites: Part B. Vol 43, No 6, pp. 2646-2654, 2012.
"Cohesive Zone Models: A Critical Review of Traction-Separation Relationships Across Fracture Surfaces". K. Park and G.H. Paulino. Applied Mechanics Reviews. Vol. 64, No. 6, 060802-1 to 20, 2013.
"Analysis of Fracture in Aluminum Joints Bonded with a Bi-Component Epoxy Adhesive". M. Alfano, F. Furgiuele, L. Pagnotta and G. H. Paulino. Journal of Testing and Evaluation. Vol 39, No. 2, 2011.
"On the enhancement of bond toughness for Al/epoxy T-peel joints with laser treated substrates". M. Alfano, G. Lubineau, F. Furgiuele, and G.H. Paulino. International Journal of Fracture. Vol. 171, No. 2, pp. 139-150, 2011.
"Geometric nonlinear analyses of functionally graded beams using a tailored Lagrangian formulation". C.A. Almeida, J.C.R. Albino, I.F.M. Menezes, G.H. Paulino. Mechanics Research Communications. Vol. 38, No. 8, pp. 553-559, 2011.
"Design of Pressure Vessels Using Shape Optimization: An Integrated Approach". R.C. Carbonari, P.A. Munoz-Rojas, E.Q. Andrade, G.H. Paulino, K. Nishimoto, and E .C.N. Silva. International Journal of Pressure Vessels and Piping. Vol. 88, No. 5-7, pp. 198-212, 2011.
"Development of a Flattened Indirect Tension Test for Asphalt Concrete" E.V. Dave, A. F. Braham, W.G. Buttlar, & G.H. Paulino. Journal of Testing and Evaluation. Vol 39, No. 3, 2011.
"Viscoelastic Functionally Graded Finite Element Method Using Correspondence Principle" E.V. Dave, G.H. Paulino, W.G. Buttlar. ASCE: Journal of Materials in Civil Engineering. Vol 23, No. 1, pp. 39-48, 2011.
"A hybrid experimental/numerical technique to extract cohesive fracture properties for mode-I fracture of quasi-brittle materials". A.L.Gain, J. Carroll, G.H. Paulino, and J. Lambros. International Journal of Fracture. Vol 169, No. 2, pp. 113-131, 2011.
"A Unified Library of Nonlinear Solution Schemes." S.E. Leon, G.H. Paulino, A. Pereira, I.F.M. Menezes, E.N. Lages. Applied Mechanics Reviews. Vol 64. No 4. Article 040803-1 to 26. 2011.
"Special issue on the advances in mesh reduction methods — In honor of Professor Subrata Mukherjee on the occasion of his 65th birthday" Y. Liu, W. Ye, A.-V. Phan, G. H. Paulino. Engineering Analysis with Boundary Elements. Vol 35, No 2, p. 158, 2011.
"Single-loop System Reliability-Based Topology Optimization Considering Statistical Dependence between Limit-States". T.H. Nguyen, J. Song, and G.H. Paulino. Structural and Multidisciplinary Optimization. Vol. 44, No. 5, pp. 593-611, 2011.
"Parallel Computing of Wave Propagation in Three Dimensional Functionally Graded Media". K. Park and G.H. Paulino. Mechanics Research Communications. Vol. 38, No. 6, pp. 431-436, 2011.
"Tailoring vibration mode shapes using topology optimization and functionally graded material concepts" W. M. Rubio, G.H. Paulino, E. C. N. Silva. Smart Materials and Structures. Vol 20, No. 2, 025009, 2011.
"Direct Extraction of Cohesive Fracture Properties from Digital Image Correlation: A Hybrid Inverse Technique." B. Shen, G. H. Paulino. Experimental Mechanics. Vol. 51, No. 2, pp. 143-163, 2011.
"Identification of cohesive zone model and elastic parameters of fiber-reinforced cementitious composites using digital image correlation and a hybrid inverse technique." B. Shen, G. H. Paulino. Cement and Concrete Composites. Vol. 33, No. 5, pp. 572-585, 2011.
"Application of layout and topology optimization using pattern gradation for the conceptual design of buildings." L.L . Stromberg, A. Beghini, W. F. Baker, and G. H. Paulino. Structural and Multidisciplinary Optimization. Vol 43, No. 2, pp. 165-180, 2011.
"Finite Particle Method for Progressive Failure Simulation of Truss Structures." Y. Yu, G. H. Paulino, and Y. Luo. Journal of Structural Engineering. Vol 137, No. 10, pp. 1168-1181, 2011.
"Layout and material gradation in topology optimization of functionally graded structures: a global-local approach". S. R. M. Almeida, G. H. Paulino, and E. C. N. Silva. Structural and Multidisciplinary Optimization. Vol. 42, No. 6, pp. 855-868, 2010.
"Integral Piezoactuator System with Optimum Placement of Functionally Graded Material - A Topology Optimization Paradigm" R. C. Carbonari, G. H. Paulino, E. C. N. Silva. Journal of Intelligent Material Systems and Structures. Vol 21, No 6, pp. 1653-1668, 2010.
"Dependence of crack tip singularity on loading functions." Y.-S. Chan, G. H. Paulino, B.-F. Feng, A. Sutradhar. Mechanics Research Communications. Vol 37, No 2, pp. 191-197, 2010.
"Interfacial cracking in a graded coating/substrate system loaded by a frictional sliding flat punch." H. J. Choi, G. H. Paulino. Proceedings of the Royal Society of London. A: Mathematical, Physical and Engineering Sciences, Vol. 466, No. 2115, pp. 853-880, 2010.
"Special issue on the advances in mesh reduction methods — In honor of Professor Subrata Mukherjee on the occasion of his 65th birthday" Y. Liu, W. Ye, A.-V. Phan, G. H. Paulino. Engineering Analysis with Boundary Elements. Vol 34, No 11, pp. 902-903, 2010.
"Recycling Krylov subspaces for efficient large-scale electrical impedance tomography" L. A. M. Mello, E. de Sturler, G. H. Paulino, and E. C. N. Silva. Computer Methods in Applied Mechanics and Engineering. Vol 199, No 49-52, pp. 3101-3110, 2010.
"On the constitutive relation of materials with microstructure using a potential-based cohesive model for interface interaction" D. Ngo, K. Park, G.H. Paulino, and Y. Huang. Engineering Fracture Mechanics. Vol 77, No 7, pp. 1153-1174, 2010.
"A computational paradigm for multiresolution topology optimization (MTOP)." T.H. Nguyen, G.H. Paulino, J. Song, and C.H. Le. Structural and Multidisciplinary Optimization. Vol 41, No. 4, pp. 525-539, 2010.
"Single-loop system reliability-based design optimization using matrix-based system reliability method: theory and applications." T. H. Nguyen, J. Song, and G.H. Paulino. ASME Journal of Mechanical Design. Vol 132, No. 1, pp. 011005-1-11, 2010.
"Cohesive fracture model for functionally graded fiber reinforced concrete" K. Park, G.H. Paulino, J. Roesler. Cement and Concrete Research. Vol 40, No. 6, pp. 956-965, 2010.
"Adaptive dynamic cohesive fracture simulation using nodal perturbation and edge-swap operators" G.H. Paulino, K. Park, W. Celes, R. Espinha International Journal for Numerical Methods in Engineering. Vol 84, No. 11, pp. 1303-1343, 2010.
"Inverse Computation of Cohesive Fracture Properties from Displacement Fields." B. Shen, I. Stanciulescu, G.H. Paulino. Inverse Problems in Science and Engineering. Vol 18, No. 8, pp. 1103-1128, 2010.
"Topological optimization for designing patient-specific large craniofacial segmental bone replacements". A. Sutradhar, G. H. Paulino, M. J. Miller and T. H. Nguyen. Proceedings of the National Academy of Sciences. Vol 107, No. 30, pp. 13222-13227, 2010.
“Polygonal finite elements for topology optimization: A unifying paradigm.” C. Talischi, G. H. Paulino, A. Pereira, and I. F. M. Menezes. International Journal for Numerical Methods in Engineering. Vol 82, No. 6, pp. 671-698, 2010.
“An Analytical Approach for an Adhesive Layer in a Graded Elastic Wedge.” E. E. Theotokoglou, I. H. Stampouloglou, G. H. Paulino. Mechanics of Advanced Materials and Structures. Vol 17, No. 6, pp. 393-405, 2010.
“Mode I fracture of adhesive joints using tailored cohesive zone models.” M. Alfano, F. Furgiuele, A. Leonardi, C. Maletta, and G. H. Paulino. International Journal of Fracture. Vol. 157, No. 1-2, pp. 193-204, 2009.
"A Simple and Effective Inverse Projection Scheme for Void Distribution Control in Topology Optimization" S. R. M. Almeida, G.H. Paulino, and E. C. N. Silva. Structural and Multidisciplinary Optimization. Vol. 39, No. 4, pp. 359-371, 2009.
“Multi-actuated functionally graded piezoelectric micro-tools design: A multiphysics topology optimization approach.” R. C. Carbonari, E. C. N. Silva, and G. H. Paulino. International Journal for Numerical Methods in Engineering. Vol. 77, No. 2, pp. 301-336, 2009.
“ParTopS: compact topological framework for parallel fragmentation simulations.” R. Espinha, W. Celes, N. Rodriguez, and G. H. Paulino. Engineering with Computers Vol. 25, No. 4, pp. 345-365, 2009.
“Numerical Simulations of Fracture Resistance of Functionally Graded Concrete Materials.” F. Evangelista, J. Roesler, and G. H. Paulino. Transportation Research Record: Journal of the Transportation Research Board No. 2113 pp. 122-131, 2009.
“Integration of singular enrichment functions in the generalized/extended finite element method for three-dimensional problems.” K. Park, J. Pereira, C. A. Duarte, and G. H. Paulino. International Journal for Numerical Methods in Engineering. Vol. 78, No. 10, pp. 1220-1257, 2009.
"A unified potential-based cohesive model for mixed-mode fracture" K. Park, G.H. Paulino, and J.R. Roesler. Journal of the Mechanics and Physics of Solids. Vol. 57, No. 6, pp. 891-908, 2009.
"A modified Q4/Q4 element for topology optimization" G.H. Paulino and C.H. Le. Structural and Multidisciplinary Optimization. Vol. 37, No. 3, pp. 255-264, 2009.
“Optimal design of periodic functionally graded composites with prescribed properties.” G. H. Paulino, E. C. N. Silva, and C. H. Le. Structural and Multidisciplinary Optimization, Vol. 38, No. 5, pp. 469-489, 2009.
"Toward optimal design of piezoelectric transducers based on multifunctional and smoothly graded hybrid material systems" W. M. Rubio, E. C. N. Silva, and G. H. Paulino. Journal of Intelligent Material Systems and Structures. Vol. 20, No. 14, pp. 1725-1746, 2009.
"Honeycomb Wachspress Finite Elements for Structural Topology Optimization" C. Talischi, G.H. Paulino, and C. Le. Structural and Multidisciplinary Optimization. Vol. 37, No. 6, pp. 569-583, 2009.
"Gradient elasticity theory for mode III fracture in functionally graded materials - Part II: Crack parallel to the material gradation" Y.S. Chan, G.H. Paulino and A. C. Fannjiang. ASME Journal of Applied Mechanics. Vol. 76, No. 6, 061015-1 to 11, 2008.
"Using Rheology to Achieve Co-Extrusion of Cement-Based Materials with Graded Cellular Structures" Y. Chen, L. J. Struble, and G. H. Paulino. International Journal of Applied Ceramic Technology. Vol. 5, No. 5, pp. 513-521, 2008.
“Thermoelastic Contact Mechanics for a Flat Punch Sliding Over a Graded Coating/Substrate System with Frictional Heat Generation” H.J. Choi and G.H. Paulino. Journal of the Mechanics and Physics of Solids. Vol. 56, No. 4, pp. 1673-1692, 2008.
"Determination of the Kink Point in the Bi-Linear Softening Model for Concrete" K. Park, G.H. Paulino and J.R. Roesler. Engineering Fracture Mechanics. Vol. 75, No. 13, pp. 3806-3818, 2008.
"Virtual Internal Pair-Bond Model for Quasi-Brittle Materials" K. Park, G.H. Paulino and J.R. Roesler. ASCE - Journal of Engineering Mechanics. Vol. 134, No. 10, pp. 856-866, 2008.
“A General Topology-Based Framework for Adaptive Insertion of Cohesive Elements in Finite Element Meshes” G.H. Paulino, W. Celes, R. Espinha, and Z. (Jenny) Zhang. Engineering with Computers. Vol. 24, No. 1, pp. 59-78, 2008.
“Honoring professor Erdogan's seminal contributions to mixed boundary-value problems of inhomogeneous and functionally graded materials - Foreword” M. J. Pindera and G.H. Paulino. ASME Journal of Applied Mechanics. Vol. 75, No. 5 050301-1, 2008.
"Functionally Graded Fiber-Reinforced Cement Composite: Processing, Microstructure, and Properties" B. Shen, M. Hubler, G. H. Paulino, and L. J. Struble. Cement and Concrete Composites. Vol. 30, No. 8, pp. 663-673, 2008.
“delta(25) Crack opening displacement parameter in cohesive zone models: experiments and simulations in asphalt concrete” S. H. Song, M. P. Wagoner, G. H. Paulino, W. G. Buttlar. Fatigue & Fracture of Engineering Materials and Structures. Vol. 31, No. 10, pp. 850-856, 2008.
"Assessment of existing micro-mechanical models for asphalt mastics considering viscoelastic effects." H. M. Yin, W. G. Buttlar, G. H.Paulino, H. Di Benedetto. Road Materials and Pavement Design Vol 9, No. 1, pp. 31-57, 2008.
"An explicit elastic solution for a brittle film with periodic cracks." H. M. Yin, G. H. Paulino, W. G. Buttlar. International Journal of Fracture Vol 153, No. 1, pp. 39-52, 2008.
"Assessment of Existing Micro-mechanical Models for Asphalt Mastics Considering Viscoelastic Effects." H.M. Yin, W.G. Buttlar, G. H. Paulino, and H. Di Benedetto. Road Materials and Pavement Design. Vol 9, No. S1, pp. 397-416, 2008.
“Effective thermal conductivity of functionally graded particulate nanocomposites with interfacial thermal resistance” H.M. Yin, G.H. Paulino, W.G. Buttlar, and L. Z. Sun. ASME Journal of Applied Mechanics. Vol. 75, No. 5, 051113-1 to 6, 2008.
"Heat Flux Field for One Spherical Inhomogeneity Embedded in a Functionally Graded Material Matrix" H. M. Yin, G. H. Paulino, W. G. Buttlar, and L. Z. Sun. International Journal of Heat and Mass Transfer. Vol. 51, Nos. 11-12, pp. 3018-3024, 2008.
"Cohesive zone modeling of mode I fracture in adhesive bonded joints." E. Alfano, F. Furgiuele, A. Leonardi, C. Maletta, G. H. Paulino. Key Engineering Materials. 348-349, pp. 13-16, 2007.
“Topology Optimization Design of Functionally Graded Bimorph-Type Piezoelectric Actuators” R.C. Carbonari, E.C.N. Silva, and G.H. Paulino. Smart Materials & Structures. Vol. 16, No. 6, pp. 2605-2620, 2007.
“On Fracture Criteria for Mixed-Mode Crack Propagation in Functionally Graded Materials” J.H. Kim and G.H. Paulino. Mechanics of Advanced Materials and Structures. Vol. 14, No. 4, pp. 227-244, 2007.
"Fracture behavior of functionally graded concrete materials for rigid pavements" J.R. Roesler, G. H. Paulino, C. Gaedicke, A. Bordelon, and K. Park. Transportation Research Record 3047, pp. 40-49, 2007.
"The Weak Patch Test for Nonhomogeneous Materials Modeled with Graded Finite Elements" G.H. Paulino and J.-H. Kim. Journal of the Brazilian Society of Mechanical Sciences and Engineering. Vol. XXIX, No. 1, pp. 63-81, 2007.
"Concrete fracture prediction using bilinear softening" J. Roesler, G.H. Paulino, K. Park and C. Gaedicke. Cement & Concrete Composites , Vol. 29, No. 4, pp. 300-312, 2007.
“On Graded Elements for Multiphysics Applications” E.C.N. Silva, R.C. Carbonari, and G.H. Paulino. Smart Materials & Structures. Vol. 16, No. 6, pp. 2408-2428, 2007.
Erratum: "Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model" S.-H. Song, G.H. Paulino and W.G.Buttlar. ASCE Journal of Engineering Mechanics Vol. 133, No.7, p. 8531215-1223, 2007.
"Optimization of material distribution in functionally graded structures with stress constraints" F. V. Stump, E. C. N. Silva, G. H. Paulino. Communications in Numerical Methods in Engineering Vol. 23 No.6, pp. 535-551, 2007.
“Constitutive Behavior of Composites with Interface Debonding: the Extended Mori-Tanaka Method for Uniaxial Tension” H. Tan, Y. Huang, C. Liu, G. Ravichandran, and G.H. Paulino. International Journal of Fracture. Vol, 146, No. 3, pp. 139-148, 2007.
"Large-scale topology optimization using preconditioned Krylov subspace methods with recycling" S. Wang, E. de Sturler and G.H. Paulino. International Journal for Numerical Methods in Engineering , Vol. 69, No. 12 , pp. 2441-2468 , 2007.
"Micromechanics-based thermoelastic model for functionally graded particulate materials with particle interactions" H.M. Yin, G.H. Paulino, W.G. Buttlar and L.Z. Sun. Journal of the Mechanics and Physics of Solids , Vol. 55, No. 1, pp. 132-160, 2007.
"Simplified solution for periodic thermal discontinuities in an asphalt overlay bonded to rigid pavements" H.M. Yin, W.G. Buttlar and G.H. Paulino. Journal of Transportation Engineering, Vol. 133, No.1, pp. 39-46, 2007.
"Extrinsic cohesive zone modeling of dynamic fracture and Microbranching Instability in Brittle Materials" Z. Zhang, G.H. Paulino and W. Celes. International Journal for Numerical Methods in Engineering. Vol. 72, No. 8, pp. 893-923, 2007.
“Wave Propagation and Dynamic Analysis of Smoothly Graded Heterogeneous Continua Using Graded Finite Elements” Z. Zhang and G.H. Paulino. International Journal of Solids and Structures. Vol. 44, No. 11-12, pp. 3601-3626, 2007.
"Application of graded finite elements for asphalt pavement" W.G. Buttlar, G.H. Paulino and S. H. Song. ASCE Journal of Engineering Mechanics, Vol. 132, No. 3, pp. 240-249, 2006.
"Change of Constitutive Relations due to Interaction Between Strain-Gradient Effect and Material Gradation" Y.-S. Chan, G.H. Paulino and A.C. Fannjiang. ASME Journal of Applied Mechanics, Vol. 73, No. 5, pp. 871-875, 2006.
"Extrudability of cement-based materials." Y. Chen, L. J. Struble. G. H. Paulino. American Ceramic Society Bulletin 85 (6), pp. X1-X5, 2006.
"Micromechanics-Based Interfacial Debonding Model for Damage of Functionally Graded Materials with Particle Interactions" G.H. Paulino, H.M. Yin and L.Z. Sun. International Journal of Damage Mechanics, special issue on "Microstructural Mechanics and Damage Mechanics of Materials," Vol. 15, No. 3, pp. 267-288, 2006.
"The simple boundary element method for multiple cracks in functionally graded media governed by potential theory: a three-dimensional Galerkin approach" G.H. Paulino and A. Sutradhar. International Journal for Numerical Methods in Engineering, Vol. 65, No. 12, pp. 2007-2034, 2006.
"A boundary layer framework considering material gradation effects" D.J. Shim, G.H. Paulino and R.H. Dodds Jr. Engineering Fracture Mechanics, Vol. 73, No. 5, pp. 593-615, 2005.
"Effect of material gradation on K-dominance of fracture specimens" D.J. Shim, G.H. Paulino and R.H. Dodds Jr. Engineering Fracture Mechanics, Vol. 73, No. 5, pp. 643-648, 2005.
"J resistance behavior in functionally graded materials using cohesive zone and modified boundary layer models" D.J. Shim, G.H. Paulino and R.H. Dodds Jr. International Journal of Fracture, Vol, 139 No. 1, pp. 91-117, 2006.
"Modeling bamboo as a functionally graded material: lessons for the analysis of affordable materials" E.C.N. Silva, M.C. Walters and G.H. Paulino. Journal of Materials Science, special issue on "Materials for Affordable Housing and Infrastructure", Vol, 41 No. 21, pp. 6991-7004, 2006.
"A bilinear cohesive zone model tailored for fracture of asphalt concrete considering viscoelastic bulk material" S.H. Song, G.H. Paulino, W. G. Buttlar. Engineering Fracture Mechanics Vol. 73, No.18, pp. 2829-2848, 2006.
"Dynamic stress intensity factors for homogeneous and smoothly heterogeneous materials using the interaction integral method" S.-H. Song and G.H. Paulino. International Journal of Solids and Structures, Vol. 43, No. 16, pp. 4830-4866, 2006.
"Simulation of crack propagation in asphalt concrete using a intrinsic cohesive zone model" S.-H. Song, G.H. Paulino and W.G.Buttlar. ASCE Journal of Engineering Mechanics Vol. 132, No.11, pp. 1215-1223, 2006.
"Computation of mixed-mode stress intensity factors for cracks in three-dimensional functionally-graded solids" M.C. Walters, G.H. Paulino and R. H. Dodds, Jr. ASCE Journal of Engineering Mechanics, Vol. 132, No. 1, pp. 1-15, 2006.
"A compact adjacency-based topological data structure for finite element mesh representation" W. Celes, G.H. Paulino and R. Espinha. International Journal for Numerical Methods in Engineering, Vol. 64, No. 11, pp. 1529-1556, 2005.
"Efficient handling of implicit entities in reduced mesh representations" W. Celes, G.H. Paulino and R. Espinha. Journal of Computing and Information Science in Engineering, special issue on "Mesh-Based Geometric Data Processing", Vol. 5, No. 4, pp. 348-359, 2005.
"Consistent formulations of the interaction integral method for fracture of functionally graded materials" J.-H. Kim and G.H. Paulino. ASME Journal of Applied Mechanics, Vol. 72, No. 3, pp. 351-364, 2005.
"On accurate numerical evaluation of stress intensity factors and T-stress in functionally graded materials." J.-H. Kim, G.H. Paulino. Materials Science Forum 492-493, pp. 403-408, 2005.
"Mixed-Mode Crack Propagation in Functionally Graded Materials" J.-H. Kim and G.H. Paulino. Materials Science Forum Vols. 492-493, pp. 409-414. 2005.
"Dynamic Fracture of Functionally Graded Composites Using an Intrinsic Cohesive Zone Model" G.H. Paulino and Z. Zhang. Materials Science Forum Vols. 492-493, pp. 447-452. 2005.
"Design of Functionally Graded Structures Using Topology Optimization" G. H. Paulino and E. C. N. Silva. Materials Science Forum Vols. 492-493, pp. 435-440. 2005.
"A simple Galerkin boundary element method for three-dimensional crack problems in functionally graded materials" G. H. Paulino and A. Sutradhar. Materials Science Forum Vols. 492-493, pp. 367-372. 2005.
"Cohesive zone simulation of mode I and mixed-mode crack propagation in asphalt concrete." S.H. Song, G.H. Paulino, W.G. Buttlar. Geotechnical Special Publication (130-142), pp. 189-198, 2005.
"On hypersingular surface integrals in the symmetric Galerkin boundary element method: Application to heat conduction in exponentially graded Materials" A. Sutradhar, G.H. Paulino and L.J. Gray. International Journal for Numerical Methods in Engineering, Vol. 62, No. 1, pp.122-157, 2005.
"A crack in the homogeneous half plane interacting with a crack at the interface between the nonhomogeneous coating and the homogeneous half-plane" E. E. Theotokoglou and G. H. Paulino. International Journal of Fracture Vol. 134, No. 1, pp. L11-L18. 2005.
"Interaction Between an Embedded Crack and an Interface Crack inNonhomogeneous Coating System" E. E. Theotokoglou and G. H. Paulino. Materials Science Forum Vols. 492-493, pp. 397-402. 2005.
"Development of a single-edge notched beam test for asphalt concrete mixtures." M.P. Wagoner, W.G. Buttlar, G.H. Paulino. Journal of Testing and Evaluation Vol. 33, No. 6, pp. 452-460. 2005. Experimental Mechanics, Vol. 45, No. 3, pp. 270-277, 2005.
"Development of a single-edge notched beam test for the study of asphalt concrete fracture." M.P. Wagoner, W.G. Buttlar, G.H. Paulino. Geotechnical Special Publication (130-142), pp. 137-149, 2005.
"Disk-shaped compact tension test for asphalt concrete fracture" M.P. Wagoner, W.G. Buttlar and G.H. Paulino. Experimental Mechanics, Vol. 45, No. 3, pp. 270-277, 2005.
"Investigation of the fracture resistance of hot-mix asphalt concrete using a disk-shaped compact tension test." M.P. Wagoner, W.G. Buttlar, G.H. Paulino, P. Blankenship. Transportation Research Record (1929), pp. 183-192, 2005.
"Interaction-integral procedures for 3-D curved cracks including surface tractions" M.C. Walters, G.H. Paulino and R. H. Dodds, Jr. Engineering Fracture Mechanics, Vol. 72, No. 11, pp. 1635-1775, 2005.
"Effective thermal conductivity of two-phase functionally graded particulate composites" H.M. Yin, G.H. Paulino, W.G. Buttlar and L.Z. Sun. Journal of Applied Physics, Vol. 98, No. 6, Article 063704 (9 pages), 2005.
"A Multiscale Framework for Elastic Deformation of Functionally Graded Composites" H. M. Yin, L. Z. Sun, G. H. Paulino. Materials Science Forum Vols. 492-493, pp. 391-396. 2005.
"Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials" Z. Zhang and G.H. Paulino. International Journal of Plasticity , special issue on "Inelastic Response of Multiphase Materials," Vol. 21, No. 6, pp. 1195-1254, 2005.
"Green's function for a two-dimensional exponentially graded elastic medium" Y.-S. Chan, L.J.Gray, T.Kaplan and G.H. Paulino. Proceedings of the Royal Society of London. A: Mathematical, Physical and Engineering Sciences, Vol. 460, No. 2046, pp.1689-1706, 2004.
"The hybrid boundary element method applied to problems of potential theory in nonhomogeneous materials." N.A. Dumont, R.A.P Chaves,G.H. Paulino. International Journal of Computational Engineering Science Vol. 5, No. 4, pp. 863-891, 2004.
"On the Poisson's ratio effect on mixed-mode stress intensity factors and T-stress in functionally graded materials" J.-H. Kim and G.H. Paulino. International Journal of Computational Engineering Science, special issue on “Modelling of Functionally Graded Materials Vol. 5, No. 4, pp. 833-861, 2004.
“Simulation of Crack Propagation in Functionally Graded Materials under Mixed-mode and Non-proportional Loading.” J.-H. Kim and G.H. Paulino. International Journal of Mechanics and Materials in Design Vol. 1, no. 1, pp. 63-94, 2004.
"T-stress in orthotropic functionally graded materials: Lekhnitskii and Stroh formalisms" J.-H. Kim and G.H. Paulino. International Journal of Fracture Vol. 126, no. 4, pp. 345-384, 2004.
"Guest Editorial: Modeling of Functionally Graded Materials." G.H. Paulino. International Journal of Computational Engineering Science 5 (4), pp. iii, 2004.
"A new approach to compute T-stress in Functionally Graded Materials by Means of the Interaction Integral Method" G.H. Paulino and J.-H. Kim. Engineering Fracture Mechanics Vol. 71, Nos. 13-14, pp.1907-1950, 2004.
"A simple boundary element method for problems of potential problems in nonhomogeneous media" A. Sutradhar, G.H. Paulino. International Journal for Numerical Methods in Engineering Vol. 60, No. 13, pp. 2203-2230, 2004.
"The simple boundary element method for transient heat conduction in functionally graded materials" A. Sutradhar, G.H. Paulino. Computer Methods in Applied Mechanics and Engineering, Vol. 193, No. 42-44, pp. 4511-4539, 2004.
"Symmetric Galerkin boundary element computation of T-stress and stress intensity factors for mixed-mode cracks by the interaction integral method" A. Sutradhar, G.H. Paulino. Engineering Analysis with Boundary Elements, Vol. 28, No. 11, pp. 1335-1350, 2004.
"Stress-intensity factors for surface cracks in functionally graded materials under mode-I thermomechanical loading." M.C. Walters, G.H. Paulino, R.H. Dodds International Journal of Solids and Structures 41 (3-4), pp. 1081-1118, 2004.
"Micromechanical modeling of functionally graded composites." H.M. Yin, L.Z. Sun, G.H Paulino. American Society of Mechanical Engineers, Applied Mechanics Division, AMD 255, pp. 1-8, 2004.
"Micromechanics-based elastic model for functionally graded materials with particle interactions" H.M. Yin, L.Z. Sun and G.H. Paulino. Acta Materialia Vol. 52, No. 12, pp. 3535–3543, 2004.
"Integral equations with hypersingular kernels - Theory and applications to fracture mechanics." Y.-S. Chan, A.C. Fannjiang, G.H. Paulino. International Journal of Engineering Science Vol. 41, No. 7, pp. 683-720, 2003.
"Green's functions and boundary integral analysis for exponentially graded materials: Heat conduction" L.J. Gray, T. Kaplan, G.H. Paulino and J.D Richardson. ASME Journal of Applied Mechanics, Vol. 70, No.4, pp.543-549, 2003.
"Improved quarter-point crack tip element" L.J. Gray, A.-V. Phan, G.H. Paulino and T. Kaplan. Engineering Fracture Mechanics, Vol.70, No.2, pp.269-283, 2003.
"Cohesive fracture modeling of elastic-plastic crack growth in functionally graded materials" Z-H. Jin, G.H. Paulino and R.H. Dodds. Engineering Fracture Mechanics, Vol.70, No.14, pp.1885-1912, 2003.
"An accurate scheme for mixed-mode fracture analysis of functionally graded materials using the interaction integral and micromechanics models" J.-H. Kim and G.H. Paulino. International Journal for Numerical Methods in Engineering, Vol. 58, No.10, pp.1457-1497, 2003.
"The interaction integral for fracture of orthotropic functionally graded materials: evaluation of stress intensity factors" J.-H. Kim and G.H. Paulino. International Journal of Solids and Structures, Vol.40, No. 15, pp.3967-4001, 2003.
"Mixed-mode J-integral formulation and implementation using graded elements for fracture analysis of nonhomogeneous orthotropic materials" J.-H. Kim and G. H. Paulino. Mechanics of Materials, Vol.35, No.1-2, pp.107-128, 2003.
"Erratum: Mixed-mode J-integral formulation and implementation using graded elements for fracture analysis of nonhomogeneous orthotropic materials" J.-H. Kim and G. H. Paulino. Mechanics of Materials, Vol.35, No.1-2, pp.107-128, 2003.
"T-Stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: a unified approach using the interaction integral method" J.H. Kim and G.H. Paulino. Computer Methods in Applied Mechanics and Engineering, Vol.192, No. 11-12, pp 1463-1494, 2003.
"Coupling of the meshfree finite cloud method with the boundary element method: a collocation approach" Gang Li, G.H. Paulino and N.R. Aluru. Computer Methods in Applied Mechanics and Engineering, Vol. 192, No. 20-21 , pp.2355-2375, 2003.
"The elastic-viscoelastic correspondence principle for functionally graded materials, revisited." S. Mukherjee, G.H. Paulino. Journal of Applied Mechanics, Transactions ASME Vol. 70, No. 3, pp. 359-363, 2003.
"Boundary element methods for functionally graded materials." G.H. Paulino, A. Sutradhar, L.J. Gray. Boundary Elements 4, pp. 137-146, 2003.
"Gradient elasticity theory for mode III fracture in functionally graded materials-Part I: crack perpendicular to the material gradation" G.H. Paulino, A.C. Fannjiang and Y.-S. Chan. ASME Journal of Applied Mechanics, Vol. 70, No.4, pp.531-542, 2003.
"Erratum: Transient heat conduction in homogeneous and non-homogeneous materials by the Laplace transform Galerkin boundary element method (Engineering Analysis with Boundary Elements (2002) 26 (119-132)." A. Sutradhar, G.H. Paulino, L.J. Gray. Engineering Analysis with Boundary Elements Vol. 27, No. 6, pp. 639, 2003.
"Integral equations with hypersingular kernels -- Theory and applications to fracture mechanics" Y.-S. Chan, A.C. Fannjiang and G. H. Paulino. International Journal of Engineering Science, Vol. 41, No.7, pp.683-720, 2002.
"The hybrid boundary element method applied to functionally graded materials." N.A. Dumont, R.A.P. Chaves, G.H. Paulino. International Series on Advances in Boundary Elements, Vol. 5, No. 4, pp. 267-276, 2002.
"Strain gradient elasticity for mode III cracks: A hypersingular integrodifferential equation approach" A.C. Fannjiang, Y.-S. Chan and G.H. Paulino. SIAM Journal on Applied Mathematics,Vol. 62, No.3, pp. 1066-1091, 2002.
"Fracture testing of a layered functionally graded material." M.R. Hill, R.D. Carpenter, G.H. Paulino, Z.A. Munir, J.C. Gibeling. ASTM Special Technical Publication (1409), pp. 169-184, 2002.
"Finite element investigation of quasi-static crack growth in functionally graded materials using a novel cohesive zone fracture model" Z.-H. Jin, G.H. Paulino, and R. H. Dodds, Jr. ASME Journal of Applied Mechanics, Vol.69, No.3, pp.370-379, 2002.
"A viscoelastic functionally graded strip containing a crack subjected to in-plane loading" Z.-H. Jin and G.H. Paulino. Engineering Fracture Mechanics, special issue on "Fracture of Functionally Graded Materials," Vol.69, No.14-16, pp.1769-1790, 2002.
"Finite element evaluation of mixed-mode stress intensity factors in functionally graded materials" J.-H. Kim and G. H. Paulino. International Journal for Numerical Methods in Engineering, Vol.53, No.8, pp.1903-1935, 2002.
"Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials" J.H. Kim and G.H. Paulino. ASME Journal of Applied Mechanics, Vol. 69, No.4, pp.502-514, 2002.
"Mixed-mode fracture of orthotropic functionally graded materials using finite elements and the modified crack closure method" J.H. Kim and G.H. Paulino. Engineering Fracture Mechanics, special issue on "Fracture of Functionally Graded Materials," Vol.69, No.14-16, pp.1557-1586, 2002.
"The elastic-viscoelastic correspondence principle for functionally graded materials, revisited" S. Mukherjee and G. H. Paulino. ASME Journal of Applied Mechanics, Vol.70, No.3, pp.359-363, 2002.
"Fracture of functionally graded materials" G.H. Paulino. Engineering Fracture Mechanics, Editorial, Vol.69, Nos.14-16, pp.1519-1520, 2002.
"Transient heat conduction in homogeneous and nonhomogeneous materials by the Laplace Transform Galerkin boundary element method" A. Sutradhar, G.H. Paulino and L.J. Gray. Engineering Analysis with Boundary Elements,Vol.26, No.2, pp. 119-132, 2002.
"Dense layered MoSi2/SiC functionally graded composites formed by field activated synthesis" E.M. Carrillo-Heian, R.D. Carpenter, G.H. Paulino, J.C. Gibeling and Z.A. Munir. Journal of the American Ceramic Society, Vol. 84, No. 5, pp. 962-968, 2001.
"Simultaneous synthesis and densification of Niobium Silicide/Niobium composites" E. M. Carrillo-Heian, C. Unuvar, J.C. Gibeling, G.H. Paulino and Z. A. Munir. Scripta Materialia, Vol.45, No.4, pp.405-412, 2001.
"The crack problem for nonhomogeneous materials under antiplane shear loading - A displacement based formulation" Y.-S. Chan, G.H. Paulino and A.C. Fannjiang. International Journal of Solids and Structures, Vol. 38, No. 17, pp. 2989-3005, 2001.
"The meshless hypersingular boundary node method for three-dimensional potential theory and linear elasticity problems" M.K. Chati, S. Mukherjee and G.H. Paulino. Engineering Analysis with Boundary Elements, Vol.25, No. 8, pp.639-653, 2001.
"The meshless standard and hypersingular boundary node methods - Applications to error estimation and adaptivity in three-dimensional problems" M.K. Chati, G.H. Paulino and S. Mukherjee. International Journal for Numerical Methods in Engineering, Vol. 50, No. 9, pp. 2233-2269, 2001.
"Transient thermal stress analysis of an edge crack in a functionally graded material" Z.-H Jin and G.H. Paulino. International Journal of Fracture, Vol. 107, No.1, pp. 73-98, 2001.
"Error estimation using hypersingular integrals in boundary element methods for linear elasticity" G.H. Paulino, G. Menon and S. Mukherjee. Engineering Analysis with Boundary Elements, Vol. 25, No. 7, pp.523-534, 2001.
"Correspondence principle in viscoelastic functionally graded materials" G.H. Paulino and Z.-H. Jin. ASME Journal of Applied Mechanics, Vol. 68, No. 1, pp 129-132, 2001.
"A crack in a viscoelastic functionally graded material layer embedded between two dissimilar homogeneous viscoelastic layers --Antiplane shear analysis" G.H. Paulino and Z.-H. Jin. International Journal of Fracture, Vol.111, No.3, pp.283-303, 2001.
"Fracture testing and finite element modeling of pure Titanium" G.H. Paulino, J.C. Gibeling, R.D. Carpenter, W.W. Liang and Z.A. Munir. Engineering Fracture Mechanics, Vol. 68, No.12, pp. 1417-1432, 2001.
"Implicit consistent and continuum tangent operators in elastoplastic boundary element formulations" G.H. Paulino and Y. Liu. Computer Methods in Applied Mechanics and Engineering, Vol. 190, Nos. 15-17, pp. 2157-2179, 2001.
"Viscoelastic functionally graded materials subjected to antiplane shear fracture" G.H. Paulino and Z.-H Jin. ASME Journal of Applied Mechanics, Vol. 68, No. 2, pp. 284-293, 2001.
"A novel technique to generate sharp cracks in metalic/ceramic functionally graded materials by reverse 4-point bending" R. D. Carpenter, G.H. Paulino, Z.A. Munir and J. C. Gibeling. Scripta Materialia, Vol. 43, No.6, pp.547-552, 2000.
"Transient thermal stress analysis of an interior crack in functionally graded materials." Z.-H. Jin, G.H. Paulino. American Society of Mechanical Engineers, Aerospace Division (Publication) AD 60, pp. 121-125, 2000.
"Elasto-viscoplastic consistent tangent operator concept-based implicit boundary element methods." Y. Liu, G.H. Paulino, L. Liang. Science in China, Series E: Technological Sciences 43 (2), pp. 154-164, 2000.
"Fracture testing and analysis of a layered functionally graded Ti/TiB beam in 3-point bending." R.D. Carpenter, W.W. Liang, G.H. Paulino, J.C. Gibeling, Z.A. Munir, Z.A. Materials Science Forum 308-311, pp. 837-842. 1999.
"Nonlinear finite element analysis using an object-oriented philosophy -- Application to beam elements and to the Cosserat continuum" E.N. Lages, G.H. Paulino, I.F.M. Menezes and R.R. Silva. Engineering with Computers, Vol.15, No.1, pp.73-89, 1999.
"Analysis of hypersingular residual error estimates in boundary element methods for potential problems" G. Menon, G.H. Paulino and S. Mukherjee. Computer Methods in Applied Mechanics and Engineering, Vol.173, Nos.3-4, pp.449-473, 1999.
"Gradient elasticity theory for a mode III crack in a functionally graded material." G.H. Paulino, A.C. Fannjiang, Y.-S. Chan. Materials Science Forum 308-311, pp. 971-976, 1999.
"Galerkin Residuals for adaptive symmetric-Galerkin boundary element methods" G.H. Paulino and L.J. Gray. ASCE Journal of Engineering Mechanics, Vol.125, No.5, pp.575-585, 1999.
"A methodology for adaptive finite element analysis: towards an integrated computational environment" G.H. Paulino, I.F.M. Menezes, J.B.C. Neto and L.F.R.C. Martha. Computational Mechanics, Vol. 23, Nos.5-6, pp.361-388, 1999.
"Elasto-viscoplastic consistent tangent operator concept-based implicit boundary element methods" L. Yong, G. H. Paulino, and L. Lihua. Science in China (Series E), Vol. 43, No. 2. 1999.
"Crack tip interpolation, revisited" L.J. Gray and G.H. Paulino. SIAM Journal on Applied Mathematics, Vol.58, No.2, pp.428-455, 1998.
"Validation of site characterization method for the study of dynamic pore pressure response." K. Sivathasan, G.H. Paulino, X.S. Li, K. Arulanandan. Geotechnical Special Publication (75 I), pp. 469-481, 1998.
"Symmetric Galerkin boundary integral fracture analysis for plane orthotropic elasticity" L.J. Gray and G.H. Paulino. Computational Mechanics, Vol.20, Nos.1-2, pp.26-33, 1997.
"Symmetric Galerkin boundary integral formulation for interface and multi-zone problems" L.J. Gray and G.H. Paulino. International Journal for Numerical Methods in Engineering, Vol.40, No.16, pp.3085-3101, 1997.
"Evaluation of automatic domain partitioning algorithms for parallel finite element analysis" S.-H. Hsieh, G.H. Paulino and J.F. Abel. International Journal for Numerical Methods in Engineering, Vol.40, No.6, pp.1025-1051, 1997.
"Evolutionary characteristic length method for smeared cracking finite element methods" K.M. Mosalam and G.H. Paulino. Finite Elements in Analysis and Design, Vol.27, No.1, pp.99-108, 1997.
"Nodal sensitivities as error estimates in computational mechanics" G.H. Paulino, F. Shi, S. Mukherjee and P.S. Ramesh. Acta Mechanica, Vol.121, Nos.1-4, pp.191-213, 1997.
"Hypersingular residuals -- A new approach for error estimation in the boundary element method" G.H. Paulino, L.J. Gray and V. Zarikian. International Journal for Numerical Methods in Engineering, Vol.39, No.12, pp.2005-2029, 1996.
"Recursive Spectral algorithms for automatic domain partitioning in parallel finite element analysis" S.-H. Hsieh, G.H. Paulino, and J.F. Abel. Computer Methods in Applied Mechanics and Engineering, Vol.121, Nos.1-4, pp.137-162, 1995.
"A new algorithm for finding a pseudoperipheral vertex or the endpoints of a pseudodiameter in a graph" G.H. Paulino, I.F.M. Menezes, M. Gattass and S. Mukherjee. Communications in Numerical Methods in Engineering, Vol.10, No.11, pp.913-926, 1994.
"Node and element resequencing using the Laplacian of a finite element graph. Part I: General concepts and algorithm" G. H. Paulino, I.F.M. Menezes, M. Gattass and S. Mukherjee. International Journal for Numerical Methods in Engineering, Vol.37, No.9, pp.1511-1530, 1994.
"Node and element resequencing using the Laplacian of a finite element graph. Part II: Implementation and numerical results" G.H. Paulino, I.F.M. Menezes, M. Gattass and S. Mukherjee. International Journal for Numerical Methods in Engineering, Vol.37, No.9, pp.1531-1555, 1994.
"Geometrical and topological consistency in interactive graphical preprocessors of three-dimensional framed structures" M. Gattass, G.H. Paulino and J.C. Gortaire. Computers and Structures, Vol.46, No.1, pp.99-124, 1993.
"A finite elastic body with a curved crack loaded in anti-plane shear" G.H. Paulino, M.T.A. Saif and S. Mukherjee. International Journal of Solids and Structures, Vol.30, No.8, pp.1015-1037, 1993.
Presentations: 
Polygonal finite elements for finite elasticity
Computational homogenization of the debonding of particle reinforced elastomers: Considering interphases
Unstructured methods to reduce mesh dependency on dynamic cohesive fracture simulations
Adaptive fracture and failure simulation
Geometrical aspects of lateral bracing systems: Where should the optimal brace point be?
Truss layout optimization embedded in a continuum
Adaptive dynamic fracture simulation using potential-based cohesive zone modeling and polygonal finite elements
Finite elements on polygonal discretizations: Concepts and applications
System reliability based topology optimization of structures under stochastic excitations
Topology Optimization of structures under stochastic excitations
Topology design of trusses using a Voronoi-based ground structure method
Phase‐field based structural topology optimization using unstructured polygonal meshes
Design of Structural Braced Frames Using Topology Optimization
Design of Structural Braced Frames Using Topology Optimization
Simulation of debonding in Al/epoxy T-peel joints using a potential based cohesive zone model
Identification of fracture parameters for a cohesive zone model using Digital Image Correlation
On Dynamic Stability Evaluation of Functionally Graded Risers
On The Modeling of Structural Dynamics of Risers Composed of Functionally Graded Materials
Topology Optimization for Millifluidics
Grain Boundary Decohesion and Particle-Matrix Debonding in Aluminum Alloy 7075-T651 using the PPR Potential-Based Cohesive Model
Topology Optimization of Structures under Random Vibrations
Viscoelastic Functionally Graded Finite Element Method Using Recursive Time Integration with Applications to Thin Bonded Asphalt Overlays
Topology Optimization using Phase Field Method and Polygonal Finite Elements
Tailoring Topology Optimization to Composite Pressure Vessel Design with Simultaneous Consideration of Fiber Angle and Material Distribution
A Unified Library of Nonlinear Solution Schemes
PolyTop: A Matlab Implementation of a General Topology Optimization Framework Using Unstructured Polygonal Finite Element Meshes
Single-loop System Reliability-Based Topology Optimization Accounting for Statistical Dependence between Multiple Limit-States
On Fatigue Crack Growth Using Cohesive Zone Model
Cohesive Zone Modeling of Dynamic Fracture: An Adaptive Mesh Refinement and Coarsening Strategy
PolyMesher: A General-Purpose Mesh Generator for Polygonal Elements Written in Matlab
PolyMesher: A General-Purpose Mesh Generator for Polygonal Elements Written in Matlab
Toward Group Optimization for the Practical Design of Building Systems
On restriction methods for two-phase optimal shape problems
GPU-Based Topology Optimization on Unstructured Meshes
Design of Functionally Graded Piezocomposite Materials Using Topology Optimization with Polygonal Mesh
Challenges and advances in system reliability-based optimization of structural topology
Polygonal finite elements: Application to structural topology optimization
Framework for Consideration of Aging and Thermal Gradients in Asphalt Concrete Pavement Simulations
ParTopS: Compact Topological Framework for Parallel Fragmentation Simulations
Extraction of Cohesive Properties of Elasto-Plastic material using Inverse Analysis
Investigation of Low Temperature Cracking through an Improved Thermal Cracking Model
Single-loop System Reliability-Based Design & Topology Optimization (SRBDO/SRBTO): A Matrix-based System Reliability (MSR) Method
Potential-based Dynamic Fracture Simulation with Adaptive Topological Operators
Pattern Gradation and Repetition with Application to High-Rise Building Design
Topological embedding using a multilevel mesh representation for topology optimization
Topology Optimization with Polygonal Finite Elements
ParTopS: Compact Topological Framework for Parallel Fragmentation Simulations
Large deflection analysis of planar solids based on the Finite Particle Method
Creep Compliance Analysis Technique for the Flattened Indirect Tension Test of Asphalt Concrete
Integration of Laboratory Testing, Field Performance Data, and Numerical Simulations for the Study of Low-Temperature Cracking
Asphalt Pavement Aging and Temperature Dependent Properties through a Functionally Graded Viscoelastic Model, Part-I: Development, Implementation and Verification
Asphalt Pavement Aging and Temperature Dependent Properties through a Functionally Graded Viscoelastic Model, Part-II: Applications
Parallel Wave Propagation and Topological Operators for Fragmentation Simulation
Prediction of Concrete Fracture Mechanics Behavior and Size Effect using Cohesive Zone Modeling
Publications (Books): 
A. Sutradhar, G. H. Paulino and L. J. Gray Symmetric Galerkin Boundary Element Method, 276 p. 106 illus., 22 in color, Hardcover, Springer-Verlag, Berlin, 2008. ISBN: 978-3-540-68770-2.
Rubio, W. M, Vatanabe, S. L., Silva, E. C. N., Paulino, G. H. "Advanced Computational Materials Modeling: From Classical to Multi-Scale Techniques." Chapter 8: "Functionally Graded Piezoelectric Material Systems – A Multiphysics Perspective" Editors: M. V. Junior, E. A. S. Neto, P. A. Munoz-Rojas. WILEY-VCH, p. 301-341, 2010.
G. H. Paulino, Z.-H. Jin and R. H. Dodds Jr. "Failure of Functionally Graded Materials" Comprehensive Structural Integrity, (CSI) Chapter 13, Vol.2: "Fundamental Theories and Mechanisms of Failure" Editors: B. Karihaloo and W. G. Knauss; Elsevier Science, pp.607-644, 2003.
Y.iu, W. Ye, A.-V. Phan, and G. H. Paulino, Guest Editors, Engineering Analysis with Boundary Elements, "Special issue on the advances in mesh reduction methods- In honor of Professor Subrata Mukherjee on the occasion of his 65th birthday" Vol. 34, No. 11, November, 2010.
G. H. Paulino, Guest Editor, Engineering Fracture Mechanics, Special Issue on "Fracture of Functionally Graded Materials," Vol.69, Nos.14-16, September, 2002.
G. H. Paulino, Guest Editor, International Journal of Computational Engineering Science, Special Issue on "Modeling of Functionally Graded Materials," Vol.5, No.4, 2004.
G. H. Paulino and M.-J. Pindera, Guest Editors, Journal of Applied Mechanics - Transactions of the ASME, Special Issue in Honor of Prof. Fazil Erdogan, Vol.75, No.5, 2008.
G. H. Paulino, M.-J. Pindera, R. H. Dodds, Jr., F. A. Rochinha, E. V. Dave and L. Chen, Editors, Multiscale and Functionally Graded Materials, FGM IX, Oahu Island, Hawaii, October 15-18, 2006; American Institute of Physics (AIP) Conference Proceedings Vol.973, 1001 p., Hardcover, 2008; ISBN: 978-0-7354-0492-2
Phone: 
404.385.3996
Member-at-Large, elected, US Association for Computational Mechanics
Associate Editor, Journal of Applied Mechanics, ASME
Associate Editor, Mechanics Research Communications Journal, Elsevier
Donald Biggar Willet Professor of Engineering
Invited Visiting Professor, University of Sao Paulo
Chairman of the International Conference on Functionally Graded Materials
Visiting Professor appointments at the University of São Paulo
Walter L. Huber Civil Engineering Research Prize from the American Society of Civil Engineers
Xerox Award for Faculty Research
Fellow of the Wessex Institute of Great Britain
National Center for Supercomputing Applications Fellow
Burton & Erma Lewis Faculty Scholar
MTS Visiting Professorship Chair in Geomechanics from the University of Minnesota
Middle: 
H.